Hello!
I have a NAS with 32GB ECC RAM. i use ZFS raid z2 (8 disk * 4TB). At first I used SSD, but then I switched to flash. I have the embedded version on 8 GB flash, swap 2 GB.
The consumption of RAM is 97% almost all the time, so the use of swap ~ 100-300 mb begins.
How can I prevent swap from being used?
Regards !
*New 12.1 series Release:
2019-11-08: XigmaNAS 12.1.0.4.7091 - released!
*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released
We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!
Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL
2019-11-08: XigmaNAS 12.1.0.4.7091 - released!
*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released
We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!
Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL
swap usage + 32 GB ram...
-
- NewUser
- Posts: 2
- Joined: 02 Mar 2018 19:38
- Status: Offline
swap usage + 32 GB ram...
You do not have the required permissions to view the files attached to this post.
- b0ssman
- Forum Moderator
- Posts: 2458
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: swap usage + 32 GB ram...
what services or addons are you using?
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
- NewUser
- Posts: 2
- Joined: 02 Mar 2018 19:38
- Status: Offline
Re: swap usage + 32 GB ram...
samba + 1 vm + dlna
You do not have the required permissions to view the files attached to this post.
- raulfg3
- Site Admin
- Posts: 4968
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: swap usage + 32 GB ram...
check this post , perhaps can help: https://www.nas4free.org/forums/viewtop ... 57&t=13458
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable
Wiki
Last changes
Wiki
Last changes
-
- NewUser
- Posts: 1
- Joined: 23 Mar 2018 08:20
- Status: Offline
Re: swap usage + 32 GB ram...
From console you can type swapoff command. But there is something strange in your system. Consider reviewing process list using ps command and terminate unnecessary ones.Keyko wrote:Hello!
I have a NAS with 32GB ECC RAM. i use ZFS raid z2 (8 disk * 4TB). At first I used SSD, but then I switched to flash. I have the embedded version on 8 GB flash, swap 2 GB.
The consumption of RAM is 97% almost all the time, so the use of swap ~ 100-300 mb begins.
How can I prevent swap from being used?
Regards !
Vestel_5530 cihazımdan Tapatalk kullanılarak gönderildi
-
- Starter
- Posts: 59
- Joined: 25 Jun 2012 00:48
- Location: california
- Status: Offline
Re: swap usage + 32 GB ram...
I've done some tuning on my system to try to get smbd to play nice. not always successful due to a memory leak.
older system:
Platform x64-full on AMD Phenom(tm) II X2 555 Processor
System ASUSTeK Computer INC. M4A785T-M Bios: 2002 03/18/2010
10tb pool
shiny new system:
Platform x64-embedded on Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz
System ASUSTeK Computer INC. P7P55D-E LX
12gb RAM
running 11.20.4 - Omnius (revision 6766)
60tb, 15tb, and 10tb pools
rocketgirls know how to have fun
Platform x64-full on AMD Phenom(tm) II X2 555 Processor
System ASUSTeK Computer INC. M4A785T-M Bios: 2002 03/18/2010
10tb pool
shiny new system:
Platform x64-embedded on Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz
System ASUSTeK Computer INC. P7P55D-E LX
12gb RAM
running 11.20.4 - Omnius (revision 6766)
60tb, 15tb, and 10tb pools
rocketgirls know how to have fun