*New 12.1 series Release:
2019-11-08: XigmaNAS 12.1.0.4.7091 - released!

*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

About to upgrade everything but the disks -Do I need to do anything?

Everything Hardware related to build that XigmaNAS system!
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
thegush
NewUser
NewUser
Posts: 8
Joined: 26 Mar 2019 19:38
Status: Offline

About to upgrade everything but the disks -Do I need to do anything?

#1

Post by thegush » 26 Mar 2019 20:40

I hope this is the right forum for this question:
As I said, I want to build a new rig and move all the storage there - 7 disks in z3, one UFS disk and a USB thumb-drive.
Do I need to do any special steps or is it all the same to the XigmaNas OS? I'm guessing the letter, but will be nice to be assured.

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4978
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: About to upgrade everything but the disks -Do I need to do anything?

#2

Post by raulfg3 » 27 Mar 2019 07:49

no especial steps, only save your actual config to restore on your new install, and remember to"clear config & load disk" and sync ZFS webGUI whit real detected install.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

thegush
NewUser
NewUser
Posts: 8
Joined: 26 Mar 2019 19:38
Status: Offline

tnx!

#3

Post by thegush » 27 Mar 2019 10:00

Thanks!
So there are some steps - I thought that since I am not changing any of the storage devices it'll work its' magic without me.
an you please explain what I need to do in order to "sync ZFS webGUI with real detected install."?

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4978
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: tnx!

#4

Post by raulfg3 » 27 Mar 2019 10:31

thegush wrote:
27 Mar 2019 10:00
Thanks!
So there are some steps - I thought that since I am not changing any of the storage devices it'll work its' magic without me.
an you please explain what I need to do in order to "sync ZFS webGUI with real detected install."?
in Disks > ZFS > Configuration > Synchronize use button sync to sync config read from disk to webGUI so both show the same.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

thegush
NewUser
NewUser
Posts: 8
Joined: 26 Mar 2019 19:38
Status: Offline

Re: About to upgrade everything but the disks -Do I need to do anything?

#5

Post by thegush » 27 Mar 2019 11:36

Got it, cheers!

Post Reply

Return to “Server Build, Tips, Help and Suggestions”