*New 11.3 series Release:
2019-10-05: XigmaNAS 11.3.0.4.6928 - released, 11.2 series are soon unsupported!

*New 12.0 series Release:
2019-10-05: XigmaNAS 12.0.0.4.6928 - released!

*New 11.2 series Release:
2019-09-23: XigmaNAS 11.2.0.4.6881 - released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

How to Upgrade from NAS4Free 11.1.0.4.5667?

For "upgrading" from FreeNAS/NAS4Free Legacy to XigmaNAS and upgrading XigmaNAS to newer builds.
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
User avatar
Viper780
Starter
Starter
Posts: 24
Joined: 23 Jun 2012 14:54
Location: Vienna / Austria / Europe
Contact:
Status: Offline

How to Upgrade from NAS4Free 11.1.0.4.5667?

#1

Post by Viper780 » 05 Sep 2019 21:57

I have here a box which runs untouched 1,5 years now (pre RootOnZFS).
there are some (more or less) important jails on it which i would like to keep.
I would also prefer not to lose the configuration on it. Is there a way to upgrade to a newer version?

I've searched for a newer 11.1 Release so that i can jump to 11.2 but I can't find any.
In the Readme of 11.2.0.4.6400 it is stated that I shouldn't upgrade from such an outdated image
Last edited by Viper780 on 18 Sep 2019 22:17, edited 1 time in total.

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4918
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#2

Post by raulfg3 » 05 Sep 2019 22:44

save your actual config

do a fresh install on a new boot device ( to boot from old in ase of fail).

and import disk & pools

next is to configure services by hand ( or not if you import your previously saved config).

and finally migrate jails:

viewtopic.php?f=79&t=14796
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

User avatar
Viper780
Starter
Starter
Posts: 24
Joined: 23 Jun 2012 14:54
Location: Vienna / Austria / Europe
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#3

Post by Viper780 » 06 Sep 2019 00:48

Thanks for the Link to migrate jails.

I want to save my config, but unfortunatly I can't login to the webGUI

Code: Select all

Warning: require_once(session.inc): failed to open stream: No such file or directory in /usr/local/www/auth.inc on line 34

Fatal error: require_once(): Failed opening required 'session.inc' (include_path='.:/usr/local/share/pear') in /usr/local/www/auth.inc on line 34
any suggestion on how to fix this issue?
I can reach the box over smb, nfs and ssh

Restarting the WebGUI or Resetting the password wasn't possible (same error)

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4918
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#4

Post by raulfg3 » 06 Sep 2019 08:25

not problem at all.

you can still do a fresh install, import disk and configure services by hand , only mean more work.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

User avatar
Viper780
Starter
Starter
Posts: 24
Joined: 23 Jun 2012 14:54
Location: Vienna / Austria / Europe
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#5

Post by Viper780 » 06 Sep 2019 12:22

I know that my Data are save. But the jails are on the same physical disk as the boot/system partitions (256GB SSD).

It seems that the newer XigmaNAS / NAS4Free versions need repartitioning.
So I'll loose all the Data in the Jails and still have a lot of work.

Is there a way to fix the webGui or preferrable to get a backup of the configuration and the jails over SSH?

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4918
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#6

Post by raulfg3 » 06 Sep 2019 18:54

config.xml
is stored on /conf

see if its posible to save and then open on a text editor must be readable.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

User avatar
Viper780
Starter
Starter
Posts: 24
Joined: 23 Jun 2012 14:54
Location: Vienna / Austria / Europe
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#7

Post by Viper780 » 09 Sep 2019 11:45

Yes it is there and I could open it.

I've removed all the usernames and passwords and attached it here
config_nopwd.txt
You do not have the required permissions to view the files attached to this post.

damac
NewUser
NewUser
Posts: 2
Joined: 10 Sep 2019 15:57
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#8

Post by damac » 10 Sep 2019 16:02

Hi, I'm in the same situation, existing installation of NAS4Free 11.1.0.4.5127
Features in use:
- ZFS pools
- Virtualbox VMs

Looking at release notes:
- to upgrade to 12, minimum version required 11.2.0.4.6625
- to upgrade to 11.2.0.4.6625, minimum version required XigmaNAS 11.2.0.4.6154

XigmaNAS 11.2.0.4.6154 or lower is not available to download. Does that mean we're stuck?

User avatar
ms49434
Developer
Developer
Posts: 715
Joined: 03 Sep 2015 18:49
Location: Neuenkirchen-Vörden, Germany - GMT+1
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#9

Post by ms49434 » 10 Sep 2019 21:17

damac wrote:
10 Sep 2019 16:02
Hi, I'm in the same situation, existing installation of NAS4Free 11.1.0.4.5127
Features in use:
- ZFS pools
- Virtualbox VMs

Looking at release notes:
- to upgrade to 12, minimum version required 11.2.0.4.6625
- to upgrade to 11.2.0.4.6625, minimum version required XigmaNAS 11.2.0.4.6154

XigmaNAS 11.2.0.4.6154 or lower is not available to download. Does that mean we're stuck?
you are misreading the release notes.

- to upgrade to 12, minimum version required 11.2.0.4.6625 meas that
  • If you are on 11.2.0.4.6625 or higher, you can easily upgrade to 12.
  • If you are on a version lower than 11.2.0.4.6625, you must backup your configuration, create a new boot device and restore your configuration.This procedure is necessary because the partition sizes have been adjusted.
- to upgrade to 11.2.0.4.6625, minimum version required XigmaNAS 11.2.0.4.6154 means that
  • If you are on 11.2.0.4.6154 or higher, you can easily upgrade to 11.2.0.4.6625
  • If you are on a version lower than 11.2.0.4.6154, you must backup your configuration, create a new boot device and restore your configuration. This procedure is necessary because the partition sizes have been adjusted.
1) XigmaNAS 12.0.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U2, 22GB out of 32GB ECC RAM, LSI 9300-8i IT mode in passthrough mode. Pool 1: 2x HGST 10TB, mirrored, SLOG: Samsung 850 Pro, L2ARC: Samsung 850 Pro, Pool 2: 1x Samsung 860 EVO 1TB , services: Samba AD, CIFS/SMB, ftp, ctld, rsync, syncthing, zfs snapshots.
2) XigmaNAS 12.0.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U2, 8GB out of 32GB ECC RAM, IBM M1215 crossflashed, IT mode, passthrough mode, 2x HGST 10TB , services: rsync.

damac
NewUser
NewUser
Posts: 2
Joined: 10 Sep 2019 15:57
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#10

Post by damac » 11 Sep 2019 12:22

Ah! Thanks for the clarification :)
I'll go and try again.

User avatar
JoseMR
Hardware & Software Guru
Hardware & Software Guru
Posts: 1150
Joined: 16 Apr 2014 04:15
Location: PR
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#11

Post by JoseMR » 11 Sep 2019 17:52

ms49434 wrote:
10 Sep 2019 21:17
damac wrote:
10 Sep 2019 16:02
Hi, I'm in the same situation, existing installation of NAS4Free 11.1.0.4.5127
Features in use:
- ZFS pools
- Virtualbox VMs

Looking at release notes:
- to upgrade to 12, minimum version required 11.2.0.4.6625
- to upgrade to 11.2.0.4.6625, minimum version required XigmaNAS 11.2.0.4.6154

XigmaNAS 11.2.0.4.6154 or lower is not available to download. Does that mean we're stuck?
you are misreading the release notes.

- to upgrade to 12, minimum version required 11.2.0.4.6625 meas that
  • If you are on 11.2.0.4.6625 or higher, you can easily upgrade to 12.
  • If you are on a version lower than 11.2.0.4.6625, you must backup your configuration, create a new boot device and restore your configuration.This procedure is necessary because the partition sizes have been adjusted.
- to upgrade to 11.2.0.4.6625, minimum version required XigmaNAS 11.2.0.4.6154 means that
  • If you are on 11.2.0.4.6154 or higher, you can easily upgrade to 11.2.0.4.6625
  • If you are on a version lower than 11.2.0.4.6154, you must backup your configuration, create a new boot device and restore your configuration. This procedure is necessary because the partition sizes have been adjusted.

"This procedure is necessary because the partition sizes have been adjusted."

And yet we added some time ago the Embedded ROOT partition size customizer to at least mitigate this Embedded root/partition too small limitation by installing on larger partition, i.e 4GB or even more.

Sadly most of the users has been installing Embedded with default(too small partition) even on SSD's, so either is being un-noticed or disregarded unfortunately.

New users should install XigmaNAS with a bigger partition to avoid "Partition size is too small" wen upgrading to later releases with bigger root size due newer software integration etc., older/existing users can save config and re-install Embedded with a new root size then restore config to avoid the limitation in the future.

Change Root Size from this:
Embedded_Small_Root_Size.png
To this:
Embedded_New_Root_Size.png
Note: Please use high quality small 2.5" HDD or SSD for best reliability, or at least quality branded 8GB USB2.0 or better.

Regards
You do not have the required permissions to view the files attached to this post.
System: FreeBSD 12 RootOnZFS, MB: Supermicro X8SI6-F, Xeon X3450, 16GB DDR3 ECC RDIMMs.
Addons at GitHub
JoseMRPubServ
Boot Environments Intro

disaster
Starter
Starter
Posts: 31
Joined: 18 Apr 2014 10:16
Location: Italy
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#12

Post by disaster » 12 Sep 2019 10:08

Thanks for this post, I've just successfully upgrade from an old 11.1 to a 12.0 without any issue (by reinstalling and restoring the config file).

User avatar
Viper780
Starter
Starter
Posts: 24
Joined: 23 Jun 2012 14:54
Location: Vienna / Austria / Europe
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#13

Post by Viper780 » 13 Sep 2019 22:22

Most of the user just take the default value and the others the recommend size.
You can't blame the users here.

So I'm stuck with an old Version with broken Webgui.
Unless I'll lose the Data in the jails (mostly Databases), than maybe the config works....

I don't understand why there isnt the old Image anymore. I could restore my settings and Backup my jails and would be fine.

User avatar
ms49434
Developer
Developer
Posts: 715
Joined: 03 Sep 2015 18:49
Location: Neuenkirchen-Vörden, Germany - GMT+1
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#14

Post by ms49434 » 14 Sep 2019 01:30

Viper780 wrote:
13 Sep 2019 22:22
Most of the user just take the default value and the others the recommend size.
You can't blame the users here.

So I'm stuck with an old Version with broken Webgui.
Unless I'll lose the Data in the jails (mostly Databases), than maybe the config works....

I don't understand why there isnt the old Image anymore. I could restore my settings and Backup my jails and would be fine.
Nothing is lost and everything can be repaired. There are many options to get your system back to life again.

I had a look at your config file and ada4 seems to be your boot device.
ada4p4 is your data partition which is mounted under /mnt/data and acts as the storage area for your jails.
ada4p3 is the swap partition
ada4p2 must be your rootfs partition which got corrupted somehow.

Are you running the embedded or the full version?

Code: Select all

cat /etc/prd.version
cat /etc/prd.revision
cat /etc/platform
returns all necessary information

If you have the full version installed, it should be easy to restore the missing files from the public codebase on SourceForge, using 5127 as the revision number when browing the code.

If you have the embedded version installed, several options are available. Just to name a few:

Option 1: Embedded x64 - reimage root partition
Backup your configuration file.
Backup /mnt/data to a safe location.
Reimage the root partition (/dev/ada4p2) with the embedded upgrade file NAS4Free-x64-embedded-11.1.0.4.5127.img.xz which can be found on the internet.

The command to perform the upgrade/repair is

Code: Select all

/etc/rc.firmware upgrade /full_path_to_the_firmware_folder/NAS4Free-x64-embedded-11.1.0.4.5127.img.xz
The procedure might fail when necessary tools are corrupted, i.e. dd, xz, logger, growfs, mount.

Option 2: Embedded x64 - backup, install, restore
Backup your configuration file.
Backup /mnt/data to a safe location.
Move all data of /mnt/data aka /dev/ada4p4 to a safe place.
Download a copy of NAS4Free-x64-LiveCD-11.1.0.4.5127.iso or NAS4Free-x64-LiveUSB-11.1.0.4.5127.img.gz from the internet, create a installer device from it, boot and do a regular install to ada4 (GPT: OS + swap + data).
Boot, restore your data backup to /dev/ada0p4 and as the final step, restore your config.

Option 3: Embedded x64 - new boot device, copy
Backup your configuration file.
Download a copy of NAS4Free-x64-LiveCD-11.1.0.4.5127.iso or NAS4Free-x64-LiveUSB-11.1.0.4.5127.img.gz from the internet, create a installer device from it, boot and do a regular install to the new boot device (GPT: OS + swap + data).
Boot using the new boot device, copy your data folder, restore your config, import disks, import pools, adjust your mount point.
1) XigmaNAS 12.0.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U2, 22GB out of 32GB ECC RAM, LSI 9300-8i IT mode in passthrough mode. Pool 1: 2x HGST 10TB, mirrored, SLOG: Samsung 850 Pro, L2ARC: Samsung 850 Pro, Pool 2: 1x Samsung 860 EVO 1TB , services: Samba AD, CIFS/SMB, ftp, ctld, rsync, syncthing, zfs snapshots.
2) XigmaNAS 12.0.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U2, 8GB out of 32GB ECC RAM, IBM M1215 crossflashed, IT mode, passthrough mode, 2x HGST 10TB , services: rsync.

User avatar
JoseMR
Hardware & Software Guru
Hardware & Software Guru
Posts: 1150
Joined: 16 Apr 2014 04:15
Location: PR
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#15

Post by JoseMR » 14 Sep 2019 08:25

Viper780 wrote:
13 Sep 2019 22:22
Most of the user just take the default value and the others the recommend size.
You can't blame the users here.

So I'm stuck with an old Version with broken Webgui.
Unless I'll lose the Data in the jails (mostly Databases), than maybe the config works....

I don't understand why there isnt the old Image anymore. I could restore my settings and Backup my jails and would be fine.

Hi viper, I really overlooked and don't realized you are using an older version or XigmaNAS RootOnZFS, also I'm not blaming users but just commenting about the feature to increase root partition in Embedded platforms being disregarded, but this is not your case actually.

I can comment that early Full RootOnZFS platform and Full on UFS had some issues in the past wen upgrading due some file permissions and chflags causing the extraction to return 1, however this was fixed already in both Full platforms, additionally latest Full RootOnZFS platforms follows FreeBSD bsdinstall method for portability and convenience, so it will be a nice improvement to install from scratch the latest Full RootOnZFS platform into a pair of drives(recommended) if you want best redundancy and reliability, also you can install the BE Manager Extension so you can manage and backup whole BE states into files or restore from an user friendly GUI.

As for the jails, while you can simply backup to a .tgz and later restore them, if you upgrade to a latest version of XigmaNAS, you can still have some issues due host OS(FreeBSD) mismatch versioning, thus preventing the jails from start or function properly, however you can restore/recover config files, databases etc. from there to the newer jails.

My advise is to save your XigmaNAS config, and backup your jails with the tar command(so you can use as reference later), then install latest XigmaNAS RootOnZFS, then place your newly created jails to a permanent data location like any valuable data, if the jails will be located in the same boot disk to minimize main pool disk activity, please create some script to automate jail backups of the vital files via cron, or even the whole jails root if possible.

I will personally recommend you either IOcage or Bastille as a jail manager, the later is much lighter and does not requires Python3.

Regards
System: FreeBSD 12 RootOnZFS, MB: Supermicro X8SI6-F, Xeon X3450, 16GB DDR3 ECC RDIMMs.
Addons at GitHub
JoseMRPubServ
Boot Environments Intro

User avatar
Viper780
Starter
Starter
Posts: 24
Joined: 23 Jun 2012 14:54
Location: Vienna / Austria / Europe
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#16

Post by Viper780 » 14 Sep 2019 21:52

Many thanks for your help.

I have the full version (Full on UFS, installed on ZFS wasn't possible with this version) running, but I want to switch to embedded (but that is another story).

I guess a script screwed up the permissions, this box was administratored by someone else for a year and now I got it back without any documentation and additional 30TB of Data.

@ms49434
You are absoluty right with the partitions.

I'll look in to the options and backup the jails next week.

Thanks for your help.

User avatar
Viper780
Starter
Starter
Posts: 24
Joined: 23 Jun 2012 14:54
Location: Vienna / Austria / Europe
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#17

Post by Viper780 » 18 Sep 2019 20:31

ms49434 wrote:
14 Sep 2019 01:30

Are you running the embedded or the full version?

Code: Select all

cat /etc/prd.version
cat /etc/prd.revision
cat /etc/platform
returns all necessary information
Version: 11.1.0.4
Revision:5667
platform: x64-full
ms49434 wrote:
14 Sep 2019 01:30
If you have the full version installed, it should be easy to restore the missing files from the public codebase on SourceForge, using 5127 as the revision number when browing the code.
I need a bit of guidance here.
Which Files do I need? Can I repair permissions?
JoseMR wrote:
14 Sep 2019 08:25

As for the jails, while you can simply backup to a .tgz and later restore them, if you upgrade to a latest version of XigmaNAS, you can still have some issues due host OS(FreeBSD) mismatch versioning, thus preventing the jails from start or function properly, however you can restore/recover config files, databases etc. from there to the newer jails.

My advise is to save your XigmaNAS config, and backup your jails with the tar command(so you can use as reference later), then install latest XigmaNAS RootOnZFS, then place your newly created jails to a permanent data location like any valuable data, if the jails will be located in the same boot disk to minimize main pool disk activity, please create some script to automate jail backups of the vital files via cron, or even the whole jails root if possible.
Thanx for the advice.
How do I backup a Jail from the shell with the .tgz?

User avatar
ms49434
Developer
Developer
Posts: 715
Joined: 03 Sep 2015 18:49
Location: Neuenkirchen-Vörden, Germany - GMT+1
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5127?

#18

Post by ms49434 » 18 Sep 2019 21:41

Viper780 wrote:
18 Sep 2019 20:31
ms49434 wrote:
14 Sep 2019 01:30

Are you running the embedded or the full version?

Code: Select all

cat /etc/prd.version
cat /etc/prd.revision
cat /etc/platform
returns all necessary information
Version: 11.1.0.4
Revision:5667
platform: x64-full
ms49434 wrote:
14 Sep 2019 01:30
If you have the full version installed, it should be easy to restore the missing files from the public codebase on SourceForge, using 5127 as the revision number when browing the code.
I need a bit of guidance here.
Which Files do I need? Can I repair permissions?
I'm suspecting that your php.ini has been modified because the reported include path (.:/usr/local/share/pear) is not the default setting.
Please confirm that the file session.inc exists in /etc/inc.

Code: Select all

xigmanas: ~# ll /etc/inc/session.inc 
-rw-r--r--  1 root  wheel  4089 Jun 19 19:42 /etc/inc/session.inc
The loaded php.ini file should be /usr/local/etc/ini, please confirm by running the following command:

Code: Select all

xigmanas: ~# php -i | grep php.ini
Configuration File (php.ini) Path => /usr/local/etc
Loaded Configuration File => /usr/local/etc/php.ini
If this is the case please verify and reset the include_path setting in /usr/local/etc/php.ini to its default setting and reboot your machine.

Code: Select all

include_path = ".:/etc/inc:/usr/local/www"
1) XigmaNAS 12.0.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U2, 22GB out of 32GB ECC RAM, LSI 9300-8i IT mode in passthrough mode. Pool 1: 2x HGST 10TB, mirrored, SLOG: Samsung 850 Pro, L2ARC: Samsung 850 Pro, Pool 2: 1x Samsung 860 EVO 1TB , services: Samba AD, CIFS/SMB, ftp, ctld, rsync, syncthing, zfs snapshots.
2) XigmaNAS 12.0.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U2, 8GB out of 32GB ECC RAM, IBM M1215 crossflashed, IT mode, passthrough mode, 2x HGST 10TB , services: rsync.

User avatar
Viper780
Starter
Starter
Posts: 24
Joined: 23 Jun 2012 14:54
Location: Vienna / Austria / Europe
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5667?

#19

Post by Viper780 » 19 Sep 2019 12:13

session.inc is there and also the loaded config is correct.

but the php.ini is empty (0 byte)
how do i get for Version: 11.1.0.4 Revision:5667 the proper php.ini?

User avatar
ms49434
Developer
Developer
Posts: 715
Joined: 03 Sep 2015 18:49
Location: Neuenkirchen-Vörden, Germany - GMT+1
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5667?

#20

Post by ms49434 » 19 Sep 2019 12:58

Viper780 wrote:
19 Sep 2019 12:13
session.inc is there and also the loaded config is correct.

but the php.ini is empty (0 byte)
how do i get for Version: 11.1.0.4 Revision:5667 the proper php.ini?
The file can be found in the public repository on Sourceforge: php.ini
1) XigmaNAS 12.0.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U2, 22GB out of 32GB ECC RAM, LSI 9300-8i IT mode in passthrough mode. Pool 1: 2x HGST 10TB, mirrored, SLOG: Samsung 850 Pro, L2ARC: Samsung 850 Pro, Pool 2: 1x Samsung 860 EVO 1TB , services: Samba AD, CIFS/SMB, ftp, ctld, rsync, syncthing, zfs snapshots.
2) XigmaNAS 12.0.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U2, 8GB out of 32GB ECC RAM, IBM M1215 crossflashed, IT mode, passthrough mode, 2x HGST 10TB , services: rsync.

User avatar
Viper780
Starter
Starter
Posts: 24
Joined: 23 Jun 2012 14:54
Location: Vienna / Austria / Europe
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5667?

#21

Post by Viper780 » 19 Sep 2019 14:19

thanks again!

after a reboot the wbinterface works again - but the jails are not running.
Need to dig in to that next.

User avatar
Viper780
Starter
Starter
Posts: 24
Joined: 23 Jun 2012 14:54
Location: Vienna / Austria / Europe
Contact:
Status: Offline

Re: How to Upgrade from NAS4Free 11.1.0.4.5667?

#22

Post by Viper780 » 19 Sep 2019 15:23

the brig lost all of the jails - but i see them on the filesystem

could I just make a new jail with the same setting and bring it back up or would it overwrite everything?

Post Reply

Return to “Upgrade XigmaNAS”