*New 12.1 series Release:
2020-09-13: XigmaNAS 12.1.0.4.7743 - released

*New 11.4 series Release:
2020-09-12: XigmaNAS 11.4.0.4.7741 - released!


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

Upgrade 11.0.0.4 to 12.1.0.4 direct?

For "upgrading" from FreeNAS/NAS4Free Legacy to XigmaNAS and upgrading XigmaNAS to newer builds.
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
txtwincam
NewUser
NewUser
Posts: 10
Joined: 12 Jan 2020 14:46
Status: Offline

Upgrade 11.0.0.4 to 12.1.0.4 direct?

#1

Post by txtwincam »

I want to confirm my upgrade path. Can I just install on a new USB stick (Embedded) and restore the config or is there a path to 12.1.x?

My build:
Platform x64-embedded on Intel(R) Xeon(R) CPU 5160 @ 3.00GHz
System Intel S5000PSL
System BIOS Intel Corporation Version: S5000.86B.10.00.0094.101320081858 10/13/2008
Disk RAIDZ1 (13 JBOD disks) 20.3TB
OS Embedded on USB Stick (8GB)
11.0.0.4 - Sayyadina (revision 3800), Intel S5000PSL x64-embedded on Intel(R) Xeon(R) CPU 5160 @ 3.00GHz, 16GB ECC DDR2 RAM, 23.6TB RAIDZ1 (13X2tb), 3ware 9000 Series HBA,

User avatar
raulfg3
Site Admin
Site Admin
Posts: 5188
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

#2

Post by raulfg3 »

yes, it's correct, but please wait a bit a new release or read about some problems detected on latest 12.1.0.4.7091 : viewtopic.php?f=78&t=14912
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

HP T510

txtwincam
NewUser
NewUser
Posts: 10
Joined: 12 Jan 2020 14:46
Status: Offline

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

#3

Post by txtwincam »

Thank you for your guidance. I will wait.
11.0.0.4 - Sayyadina (revision 3800), Intel S5000PSL x64-embedded on Intel(R) Xeon(R) CPU 5160 @ 3.00GHz, 16GB ECC DDR2 RAM, 23.6TB RAIDZ1 (13X2tb), 3ware 9000 Series HBA,

edewit
NewUser
NewUser
Posts: 3
Joined: 30 Mar 2020 06:12
Status: Offline

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

#4

Post by edewit »

Version 12.1.0.4.7389 was released a week ago. Can the question of the OP be answered positively? In other words, has the Samba issue been solved?
I mean to do the exact same thing: moving from 11.0.04 to 12.1.0.4.7389 with a new USB stick which has a fresh 12.1.0.4.7389 embedded install on it, a new mobo and use the exported config file from the 11.0.0.4 version.


My new build:
Asrock J5005-ITX mobo with 32GB RAM, 4x WD 3TB Red drives in Raidz2 using Thermaltake drive cages, 16GB Sandisk Extreme USB3, M4-ATX power supply on 24V solar system.

User avatar
raulfg3
Site Admin
Site Admin
Posts: 5188
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

#5

Post by raulfg3 »

Yes.

Save your actual config in a safe place.

Do a new embeded install from scrath (do NOT upgrade from webGUI)
boot from this new install.
restore your previosly saved config.
reboot.


done, you must have a upgraded XigmaNAS ready to use.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

HP T510

edewit
NewUser
NewUser
Posts: 3
Joined: 30 Mar 2020 06:12
Status: Offline

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

#6

Post by edewit »

Thank you for the confirmation. Everything went fine and I am using the latest FW now. :D

maurbuss
NewUser
NewUser
Posts: 5
Joined: 25 Nov 2018 19:00
Status: Offline

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

#7

Post by maurbuss »

I'm coming from 11.0.0.4 embedded. I created a new stick with 12.1.0.4.
Web gui access started ok, but after reloaded my old configuration and reboot, I have no webgui access.
I see this message:
Warning: array_key_exists() expects parameter 2 to be array, null given in /etc/inc/system.inc on line 166 Warning: session_start(): Cannot start session when headers already sent in /etc/inc/session.inc on line 52 Warning: session_regenerate_id(): Cannot regenerate session id - session is not active in /etc/inc/session.inc on line 39 Warning: Cannot modify header information - headers already sent by (output started at /etc/inc/system.inc:166) in /usr/local/www/login.php on line 44,
Schermata del 2020-04-11 09-46-44.png
I see these message also after login, no webgui.
Old shares, ssh access, password are ok.

Have you any idea?
Thank's
You do not have the required permissions to view the files attached to this post.

User avatar
raulfg3
Site Admin
Site Admin
Posts: 5188
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

#8

Post by raulfg3 »

from shell try option to restore webGUI or try to restore again config, somethings are not well populated on last upgrade.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

HP T510

User avatar
raulfg3
Site Admin
Site Admin
Posts: 5188
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

#9

Post by raulfg3 »

12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

HP T510

maurbuss
NewUser
NewUser
Posts: 5
Joined: 25 Nov 2018 19:00
Status: Offline

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

#10

Post by maurbuss »

I use embedded not full install, however nor restore webgui neither restore config, are working.
So i'm trying to reflash usb with embedded. Saved /etc/inc/system.inc and /usr/local/www/login.php
Access to webgui, restore old nas4free configuration, error...
Checked file version:
- system.inc unchanged
- login.php has nas4free header, restored 'old' xigmanas version, no error on login page, but error after login, related to /usr/local/www/index.php.
I'm not php expert, but, for some reason www directory is corrupted after old config restore.
Sorry for my english

User avatar
ms49434
Developer
Developer
Posts: 994
Joined: 03 Sep 2015 18:49
Location: Neuenkirchen-Vörden, Germany - GMT+1
Contact:
Status: Offline

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

#11

Post by ms49434 »

maurbuss wrote:
11 Apr 2020 14:44
I use embedded not full install, however nor restore webgui neither restore config, are working.
So i'm trying to reflash usb with embedded. Saved /etc/inc/system.inc and /usr/local/www/login.php
Access to webgui, restore old nas4free configuration, error...
Checked file version:
- system.inc unchanged
- login.php has nas4free header, restored 'old' xigmanas version, no error on login page, but error after login, related to /usr/local/www/index.php.
I'm not php expert, but, for some reason www directory is corrupted after old config restore.
Sorry for my english
which extensions are you running?
1) XigmaNAS 12.1.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U3, 22GB out of 32GB ECC RAM, LSI 9300-8i IT mode in passthrough mode. Pool 1: 2x HGST 10TB, mirrored, L2ARC: Samsung 850 Pro; Pool 2: 1x Samsung 860 EVO 1TB, SLOG: Samsung SM883, services: Samba AD, CIFS/SMB, ftp, ctld, rsync, syncthing, zfs snapshots.
2) XigmaNAS 12.1.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U3, 8GB out of 32GB ECC RAM, IBM M1215 crossflashed, IT mode, passthrough mode, 2x HGST 10TB , services: rsync.

maurbuss
NewUser
NewUser
Posts: 5
Joined: 25 Nov 2018 19:00
Status: Offline

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

#12

Post by maurbuss »

I don't have any webgui extension installed, but I installed plex some years ago following this thread: viewtopic.php?t=9031
Schermata del 2020-04-11 15-19-49.png
You do not have the required permissions to view the files attached to this post.

maurbuss
NewUser
NewUser
Posts: 5
Joined: 25 Nov 2018 19:00
Status: Offline

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

#13

Post by maurbuss »

solved. Put old stick, removed all plex reference, saved configuration; reburned usb stick with 12*, restored configuration, so far all is ok.
I had read that extensions were not supported...
Thank's

User avatar
raulfg3
Site Admin
Site Admin
Posts: 5188
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

#14

Post by raulfg3 »

I have installed plex using OBI and have no problems sice ages.

Only extension problematic for me was Extended GUI.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

HP T510

maurbuss
NewUser
NewUser
Posts: 5
Joined: 25 Nov 2018 19:00
Status: Offline

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

#15

Post by maurbuss »

raulfg3 wrote:
11 Apr 2020 18:41
I have installed plex using OBI and have no problems sice ages.

Only extension problematic for me was Extended GUI.
Thank's for suggestion. I just installed obi and plex via obi

Post Reply

Return to “Upgrade XigmaNAS”