Page 1 of 1

XigmaNAS fails to boot

Posted: 19 Feb 2019 11:21
by markmarques
Hi,
tried to update via web Gui from version xxx.6400 to the new beta and got this strange booting console errors :

Code: Select all

 
BTX Loader 1.00 BTX Version is 1.02
Consoles: internal video/keyboard
BIOS drive c: is disk0
BIOS drive c: is disk0
BIOS drive c: is disk0
read 350 from 34 to 0xbd84a740, error: 0x10
read 286 from 34 to 0xbd84a740, error: 0x10
read 65 from 64 to 0xbd84e340, error: 0x10
panic: free: guard1 fail @ 0x1 from unknown:0
--> press a key on the console to reboot  <--- 
Nonetheless had a configuration backup ....
Read the version documentation and made a complete _embedded_ installation ( using an USB pendrive ) in another computer.
In that other computer I was able to import the configuration and everything was apparently OK.

But for my surprise when I re initiated and restarted the server ( the server is in an offsite place ) got the same beaviour with the same errors ...
Although In the server site i had some USB pens with Linux and they started Ok without any issues ...

Anyone has any idea what is going on ?

Re: XigmaNAS fails to boot

Posted: 27 May 2019 10:32
by markmarques
Still having this issue , even with the latest 31 03 2019 beta version.

Nonetheless the I isolated the failing boot to the existence of 2 USB devices connected at boot...
but now the messages give me something like :

Code: Select all

 
BTX Loader 1.00 BTX Version is 1.02
Consoles: internal video/keyboard
BIOS drive c: is disk0
BIOS drive d: is disk1
BIOS drive e: is disk2
BIOS drive f: is disk3
BIOS drive g: is disk4
|
int=00000006  err=0000000  efl=00010202 eip=00000c5
eax=0000000  ebx=fffffffff000  ....
.......
BTX halted


As far as I know this is a stack dump ...
As I wrote before If I *only* have on USB active during boot everything starts correctly ...
What can I do more ?