*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released

*New 12.0 series Release:
2019-10-05: XigmaNAS 12.0.0.4.6928 - released!

*New 11.2 series Release:
2019-09-23: XigmaNAS 11.2.0.4.6881 - released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

[SOLVED] WebUI unresponsive during rsync

Synchronize files & directories to/from NAS4Free with minimal data transfer.
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
nixIT
Starter
Starter
Posts: 29
Joined: 01 Jun 2015 05:31
Status: Offline

[SOLVED] WebUI unresponsive during rsync

#1

Post by nixIT » 12 Jul 2016 17:28

Hello all,

I set up rsync today to back up my data to a QNAP device. All seems to be going well, at least the files are replicating. However, during my test run, I noticed when the rsync is running, the webui is completely unresponsive. When I click on a menu option (to check logs for example), the web page just sits as the loading indicator just spins.

I recently resilvered my ZFS pool, and while the resilver was running I could still navigate the N4F webUI with no problems. I would assume this is not the desired behavior. Have I set something up incorrect?

Any help is appreciated.

thanx

--nixIT
Last edited by nixIT on 12 Jul 2016 21:09, edited 1 time in total.

spy0r
Advanced User
Advanced User
Posts: 161
Joined: 18 Jun 2015 12:24
Location: Munich, Germany
Status: Offline

Re: WebUI unresponsive during rsync

#2

Post by spy0r » 12 Jul 2016 20:39

did you start that rsync via web interface? if yes, i think this is a normal behavour... if you started via cronjob or via ssh, that shouldn't affect the gui.
NAS4Free 11.0.0.4 x64-embedded - Lian Li Q25b - AsRock Rack C2550D4I - 4x8Gb ECC Ram - 128Gb SSD Swap/Log/Extensions - RaidZ1: 3x3Tb Western Digital Red (WD30EFRX) - Backup: 1x8Tb Seagate Archive (ST8000AS0002) - APC Back UPS PRO (550VA)

nixIT
Starter
Starter
Posts: 29
Joined: 01 Jun 2015 05:31
Status: Offline

Re: WebUI unresponsive during rsync

#3

Post by nixIT » 12 Jul 2016 21:08

@spy0r,

Thanx, I did start it through the web interface. I'm running some tests to make sure everything works before setting it up as a cron job. I will mark this as solved.

--nixIT

Post Reply

Return to “RSYNC”