*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released

*New 12.0 series Release:
2019-10-05: XigmaNAS 12.0.0.4.6928 - released!

*New 11.2 series Release:
2019-09-23: XigmaNAS 11.2.0.4.6881 - released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

[Resolu] Accès de xigmanas à un nfs

French community

Moderators: mtiburs, velivole18, ernie

Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
User avatar
ernie
Forum Moderator
Forum Moderator
Posts: 1417
Joined: 26 Aug 2012 19:09
Location: France - Val d'Oise
Status: Offline

[Resolu] Accès de xigmanas à un nfs

#1

Post by ernie » 26 May 2019 20:31

Hello,

Je souhaite que xigmanas est accès au disque mis en nfs d’un raspberry pi.
Comment monter un disque nfs sur xigmanas ?

J ai pas trop trouvé d’information car surtout sur le service nfs de xigmanas.

Via le fstab de xigmanas ? Mais en embedded comment le rendre permanent ?
Via mount dans le webgui ? Mais propose que du local et pas de choix nfs.

Merci par avance
NAS 1&2:
System: GA-6LXGH(BIOS: R01 04/30/2014) / 16 Go ECC
XigmaNAS 12.0.0.4.6766 embedded
NAS1: Xeon E3 1241@3.5GHz, 4HDD@2To/raidz2 (WD red), 3HDD@300Go/sas/raidz1 (Hitachi), 1SSD cache, Zlog on sas mirror
NAS2: G3220@3GHz, 3HDD@2To/raidz1 (Seagate), 1SSD cache, 1HDD@300Go/UFS
UPS: APC Back-UPS RS 900G
Case : Fractal Design XL R2

Extensions & services:
NAS1: OBI (Plex, extendedGUI, BTSync, zrep, rclone), nfs, UPS,
NAS2: OBI (extendedGUI, zrep (backup mode))

sleid
PowerUser
PowerUser
Posts: 752
Joined: 23 Jun 2012 07:36
Location: FRANCE LIMOUSIN CORREZE
Status: Offline

Re: Accès de xigmanas à un nfs

#2

Post by sleid » 26 May 2019 21:22

Bonsoir,
Il faut ajouter dans rc.conf nfs_client_enable="YES"
Cela rend persistant le service en embedded.

Pour plus d'informations tout est ici:
https://www.freebsd.org/doc/fr/books/ha ... k-nfs.html
12.1.0.4 - RC2 (revision 7019)
FreeBSD 12.1-RC2 #0 r353745M: Sat Oct 19 03:32:24 CEST 2019
X64-embedded sur Intel(R) Atom(TM) CPU C2750 @ 2.40GHz Boot UEFI
ASRock C2750D4I 2 X 8GB DDR3 ECC
Pool of 2 vdev Raidz1: 3 x WDC WD40EFRX + 3 x WDC WD30EZRX

User avatar
ernie
Forum Moderator
Forum Moderator
Posts: 1417
Joined: 26 Aug 2012 19:09
Location: France - Val d'Oise
Status: Offline

Re: Accès de xigmanas à un nfs

#3

Post by ernie » 28 May 2019 16:14

Merci. Cela fonctionne et j'ai ajouté 2 commandes scripts:
- une en postinit pour monter le nfs (mount chemindunfs cheminsurxigmanas)
- l'autre en shutdown pour démonter (umount cheminsurxigmanas)
A+
NAS 1&2:
System: GA-6LXGH(BIOS: R01 04/30/2014) / 16 Go ECC
XigmaNAS 12.0.0.4.6766 embedded
NAS1: Xeon E3 1241@3.5GHz, 4HDD@2To/raidz2 (WD red), 3HDD@300Go/sas/raidz1 (Hitachi), 1SSD cache, Zlog on sas mirror
NAS2: G3220@3GHz, 3HDD@2To/raidz1 (Seagate), 1SSD cache, 1HDD@300Go/UFS
UPS: APC Back-UPS RS 900G
Case : Fractal Design XL R2

Extensions & services:
NAS1: OBI (Plex, extendedGUI, BTSync, zrep, rclone), nfs, UPS,
NAS2: OBI (extendedGUI, zrep (backup mode))

Post Reply

Return to “Français”