*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released

*New 12.0 series Release:
2019-10-05: XigmaNAS 12.0.0.4.6928 - released!

*New 11.2 series Release:
2019-09-23: XigmaNAS 11.2.0.4.6881 - released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

How montoring raid HW via SNMP ?

SNMP service.
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
mauro
NewUser
NewUser
Posts: 4
Joined: 06 Nov 2014 16:52
Status: Offline

How montoring raid HW via SNMP ?

#1

Post by mauro » 31 Mar 2017 11:57

Hello.

This is my problem:
With this system (11.0.0.4 - Sayyadina 3882, embedded, raid controller is HP P410 with 256MB cache but I think is indifferent for the solution) I need to check the status of disks becouse no LED status are presents on the hdd bay (microserver HP N36L).
If a disk is broken I need to know which disk change.
On Diagnostics->Log->System I see this information over ciss driver. Well.
I need to monitor this state (Raid Volume or single disk is indifferent for me: on the GUI I find what I need) over SNMP.
I try to use the info on this post:
viewtopic.php?f=45&t=3220
I change awk parameter accordly with the output of camcontrol for my controller.

Now, no traps was sent to my server SNMP. What am I doing wrong?
If I run a "snmptrap" command from Nas4Free to the server I receive the trap: no firewall/port issue.
In Services->SNMP I set community, enabled traps, set he trap host with the IP of the server, set 162 to trap port, set a trap string, in the additional parametres set
extNames.2 = "HPRaid" (It is just a description or has a meaning?)
extCommand.2 = "/mnt/Raid1/raidstatus"

And enabled all four modules.

Any ideas?

mauro
NewUser
NewUser
Posts: 4
Joined: 06 Nov 2014 16:52
Status: Offline

Re: How montoring raid HW via SNMP ?

#2

Post by mauro » 04 Apr 2017 10:08

Resolved in alternative way.
With Zabbix I have installed the Agent, and create ad item "agent trap".
Via crontab I send to the server Zabbix the output of camcontrol command.

Post Reply

Return to “SNMP”