*New 12.1 series Release:
2019-11-08: XigmaNAS 12.1.0.4.7091 - released!

*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

Owncloud [HOWTO]

Webserver service.
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
chrisf4lc0n
Advanced User
Advanced User
Posts: 265
Joined: 07 May 2013 13:15
Location: West Drayton (London)
Status: Offline

Owncloud [HOWTO]

#1

Post by chrisf4lc0n » 25 Feb 2014 14:46

I know it has been covered many times, but none of the examples given fully worked for me and NAS4Free 9.2.0.1.943.

1. Create a directory where your Owncloud will sit I chose this:

Code: Select all

mkdir /var/web
2. Download the newest Owncloud (at the time of writing it was 6.0), but you can find it here: http://owncloud.org/install/

Code: Select all

cd /var/web
fetch http://download.owncloud.org/community/owncloud-6.0.1.tar.bz2
3. Unpack the Owncloud archive and change ownership"

Code: Select all

tar xvf owncloud-6.0.1.tar.bz2
rm owncloud-6.0.1.tar.bz2
cd ..
chown -R www:www /var/web
4. Install the following (most of it been covered here: viewtopic.php?f=48&t=32, but was missing php5-zlib and php5-fileinfo which was needed in my case:

Code: Select all

# pkg_add -r php5
# pkg_add -r php5-extensions
# pkg_add -r php5-xmlrpc
# pkg_add -r php5-gettext
# pkg_add -r php5-mcrypt
# pkg_add -r php5-mbstring
# pkg_add -r php5-zip
# pkg_add -r php5-gd
# pkg_add -r php5-zlib
# pkg_add -r php5-fileinfo
# mv /usr/local/bin/php /usr/local/bin/php-cli
# cp /usr/local/bin/php-cgi /usr/local/bin/php
rehash
5. Edit needed files:
a) change max upload file:

Code: Select all

nano /usr/local/etc/php.ini
and change line 'upload_max_filesize =' and 'post_max_size ='. I changed it to:

Code: Select all

upload_max_filesize = 16G
post_max_size = 16G
and:

Code: Select all

 nano /usr/local/bin/php-cgi-websrv
change lines: UPLOAD_MAX= and POST_MAX=
like that:

Code: Select all

UPLOAD_MAX="16G"
POST_MAX="16G"
6. Create Data Directory and add it to config.php (that can be anywhere you want, but since we are running ZFS here I decided to put it there):

Code: Select all

mkdir /mnt/ZFS_RAID/Owncloud
mkdir /mnt/ZFS_RAID/Owncloud/Temp
chown -R www:www /mnt/ZFS_RAID/Owncloud
nano /var/web/owncloud/config/config.php
and add line: 'datadirectory' => '/mnt/ZFS_RAID/Owncloud',

7. Start Webserver under Services, select HTTPS and choose port (I went for 443). Copy 'Certificate' and 'Private key' from System General Tab.
Document root: /var/web/owncloud/
Upload directory: /mnt/ZFS_RAID/Owncloud/Temp/

8. Go to https://NAS IP and configure the rest of the Owncloud. If you are using DNS service that will be accessible through your DNS alias.
Watercooling is just the beginning ;)

chrisf4lc0n
Advanced User
Advanced User
Posts: 265
Joined: 07 May 2013 13:15
Location: West Drayton (London)
Status: Offline

Re: Owncloud [HOWTO]

#2

Post by chrisf4lc0n » 26 Feb 2014 12:51

I am still fighting with the message: Warning: "smbclient" is not installed. Mounting of CIFS/SMB shares is not possible. Please ask your system administrator to install it." and I do not know how to win it... Tried to install smbclient package, but that did not help, went through many guides, but did not succeed.

I did however succeed in setting ssmtp to send links to people directly from the Owncloud:

1. Install ssmtp:

Code: Select all

pkg_add -rv ssmtp
rehash


2. Create ssmtp.conf file:

Code: Select all

nano /usr/local/etc/ssmtp/ssmtp.conf
and add:

Code: Select all

root=youremail
mailhub=smtp.gmail.com:587
AuthUser=youremail
AuthPass=yourpassword
UseSTARTTLS=YES
3. Since the Owncloud only works with sendmail, which you can also configure, but it is more complicated, you need to link it with ssmtp:

Code: Select all

ln -s /usr/local/sbin/ssmtp /usr/sbin/sendmail
4. Now you can send links with Owncloud :)
Watercooling is just the beginning ;)

wookl
NewUser
NewUser
Posts: 10
Joined: 31 Mar 2013 23:00
Status: Offline

Re: Owncloud [HOWTO]

#3

Post by wookl » 03 Mar 2014 13:00

How does one add lines to the Lighttpd configuration file? I tried to nano /var/etc/lighttpd.conf and added the lines, but when i restart the files i added is removed.
According to this post viewtopic.php?f=48&t=1606 and the the manual installation guide for owncloud http://doc.owncloud.org/server/6.0/admi ... ource.html
It is important to note that the .htaccess files used by ownCloud to protect the data folder are ignored by lighttpd, so you have to secure it by yourself, otherwise your owncloud.db database and user data are publicly readable even if directory listing is off. You need to add two snippets to your lighttpd configuration file:

Code: Select all

$HTTP["url"] =~ "^/owncloud/data/" {
     url.access-deny = ("")
   }
Disable directory listing:

$HTTP["url"] =~ "^/owncloud($|/)" {
     dir-listing.activate = "disable"
   }
Owncloud is working for me, but i am not sure if I should add these lines be Webserver Auxiliary parameters or some other place?

I installed mysql 5.6 using this guide viewtopic.php?f=71&t=2780, is it possible to configure owncloud to use mysql instead sqlite when owncloud is installed using this method?

I am running openvpn and are not able to get internet on my jails, therefor this is the only option I have for installing owncloud.
11.1.0.4 - 4952 x64-full on Intel(R) Xeon(R) CPU L5640 @ 2.27GHz ASUSTeK Computer INC. P6T7 WS

chrisf4lc0n
Advanced User
Advanced User
Posts: 265
Joined: 07 May 2013 13:15
Location: West Drayton (London)
Status: Offline

Re: Owncloud [HOWTO]

#4

Post by chrisf4lc0n » 03 Mar 2014 18:50

wookl wrote:How does one add lines to the Lighttpd configuration file? I tried to nano /var/etc/lighttpd.conf and added the lines, but when i restart the files i added is removed.
It will be as everything is running from the templates there so instead of adding anything to the /var/etc/lighttpd.conf you need to:

Code: Select all

nano /etc/rc.d/lighttpd
and just below:

Code: Select all

cgi.assign = (".php" => "/usr/local/bin/php-cgi")
add a line:

Code: Select all

include "/var/etc/lighttpd-owncloud.conf"
then:

Code: Select all

nano /var/etc/lighttpd-owncloud.conf
and add:

Code: Select all

$HTTP["url"] =~ "^/owncloud/data/" {
     url.access-deny = ("")
}

$HTTP["url"] =~ "^/owncloud($|/)" {
     dir-listing.activate = "disable"
}
That should do the job, as every time you restart your NAS the lighttpd.conf gets overwritten with values from lighttpd itself...

EDIT: You obviously have not got that problem when running in jail as lighttpd is running as a separate instance, not bound with the lighttpd running outside the jail or in any other one...
EDIT 2: Obviously restart the lighttpd after making changes:

Code: Select all

/etc/rc.d/lighttpd restart
The changes should now be persistent...
Last edited by chrisf4lc0n on 03 Mar 2014 19:02, edited 1 time in total.
Watercooling is just the beginning ;)

chrisf4lc0n
Advanced User
Advanced User
Posts: 265
Joined: 07 May 2013 13:15
Location: West Drayton (London)
Status: Offline

Re: Owncloud [HOWTO]

#5

Post by chrisf4lc0n » 03 Mar 2014 18:59

wookl wrote: I installed mysql 5.6 using this guide viewtopic.php?f=71&t=2780, is it possible to configure owncloud to use mysql instead sqlite when owncloud is installed using this method?

I am running openvpn and are not able to get internet on my jails, therefor this is the only option I have for installing owncloud.
I have not tried the mysql, so cannot comment... will give it a go soon and report back ;)
I have got the same problem with openvpn, did try to get some kind of workaround, but gave up pretty quickly and decided to run everything outside the jails...
Watercooling is just the beginning ;)

wookl
NewUser
NewUser
Posts: 10
Joined: 31 Mar 2013 23:00
Status: Offline

Re: Owncloud [HOWTO]

#6

Post by wookl » 03 Mar 2014 21:53

Thanks, I added the lines. How can one check that the files are not publicly readable anymore?
Is it possible to add fast-cgi or is that only possible when one install owncloud in jail?
11.1.0.4 - 4952 x64-full on Intel(R) Xeon(R) CPU L5640 @ 2.27GHz ASUSTeK Computer INC. P6T7 WS

chrisf4lc0n
Advanced User
Advanced User
Posts: 265
Joined: 07 May 2013 13:15
Location: West Drayton (London)
Status: Offline

Re: Owncloud [HOWTO]

#7

Post by chrisf4lc0n » 04 Mar 2014 09:41

You can move index.HTML as well as index.php and see if it lists your directory structure when you go to your own cloud website.
Watercooling is just the beginning ;)

chrisf4lc0n
Advanced User
Advanced User
Posts: 265
Joined: 07 May 2013 13:15
Location: West Drayton (London)
Status: Offline

Re: Owncloud [HOWTO]

#8

Post by chrisf4lc0n » 10 Mar 2014 18:04

As requested by Franck I adding this simple guide on how to install APC, to be more specific pecl-apc:

1. Install pecl-apc itself:

Code: Select all

pkg_add -rv pecl-apc
2. Add 2 lines to extensions.ini:

Code: Select all

nano /usr/local/etc/php/extensions.ini
and then add lines:

Code: Select all

extension=memcache.so
extension=apc.so
3. Edit php.ini enable apc and set the cache size:

Code: Select all

nano /usr/local/etc/php.ini
and add lines:

Code: Select all

apc.enabled="1"
apc.shm_size="512M"
I chose 512M, but it is up to you what you want to have there...

4. Restart lighttpd:

Code: Select all

/etc/rc.d/lighttpd restart
That is it, I think :)

EDIT:
To test if it is working and you followed all my instructions and you are using the same paths as I have just do the following:

Code: Select all

cd /var/web/owncloud/
mv index.php indeks.php
cp /usr/local/share/doc/APC/apc.php /var/web/owncloud/index.php
/etc/rc.d/lighttpd restart
Now simply go to your Owncloud website and you should see nice graphs showing you memory usage etc...
To revert it you will need to:

Code: Select all

mv index.php apc.php
mv indeks.php index.php
/etc/rc.d/lighttpd restart
Voilà :)

EDIT 2: Instead of doing all the above to test it you can simply do:

Code: Select all

cp /usr/local/share/doc/APC/apc.php /var/web/owncloud/apc.php
Now in the web browser type your 'Owncloud address'/apc.php
Watercooling is just the beginning ;)

stephane
NewUser
NewUser
Posts: 10
Joined: 18 Apr 2014 18:39
Status: Offline

Re: Owncloud [HOWTO]

#9

Post by stephane » 18 Apr 2014 18:59

Thank you for the installation guide, I was able to configure Owncloud on Nas4free 9.2.0.1. However, I am not successful in getting the Owncloud version 6.0.2 encryption application to work: I alway get the following error:

Encryption library
Missing requirements. Please make sure that PHP 5.3.3 or newer is installed and that OpenSSL together with the PHP extension is enabled and configured properly. For now, the encryption app has been disabled.

I have search a lot, but I can't find the answer.. Can anyone help me? Step by step is appreciated as I am a bit of a newbie with Unix commands..

chrisf4lc0n
Advanced User
Advanced User
Posts: 265
Joined: 07 May 2013 13:15
Location: West Drayton (London)
Status: Offline

Re: Owncloud [HOWTO]

#10

Post by chrisf4lc0n » 18 Apr 2014 21:33

OK I tried to encrypt and encountered a completely different problem...
The SSL certificate file responsible for the encrytption was empty... I could copy another one over, but in the end decided to disable encryption and get back to square one...
I am not sure that at current stage you could enable encryption at all, even if you overcome the problem you are having, you will bump onto another one like mine...
Watercooling is just the beginning ;)

chrisf4lc0n
Advanced User
Advanced User
Posts: 265
Joined: 07 May 2013 13:15
Location: West Drayton (London)
Status: Offline

Re: Owncloud [HOWTO]

#11

Post by chrisf4lc0n » 27 Aug 2014 20:16

Gave up on the OwnCloud as Firefox does not support the sync anymore :(
Watercooling is just the beginning ;)

c71clark
Starter
Starter
Posts: 15
Joined: 07 Sep 2014 17:05
Status: Offline

Re: Owncloud [HOWTO]

#12

Post by c71clark » 18 Sep 2014 04:44

Maybe I'm just too much of a noob, but no one has yet mentioned HOW to enter command line. Is it through the "Advanced|Command" menu item? Are you looking via putty or something? I tried to follow using the top box in "Advanced|Execute command" but mkdir didn't work. So I made the folder in the File Manager, uploaded the ownCLoud bz2 file to it, modified the permission using File Manager to let myself have admin permissions on the new folder, then tried to TAR the bz2 file open. Didn't work.

So, what tool am I using to push these commands, and can it be done completely from the GUI?

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4974
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Owncloud [HOWTO]

#13

Post by raulfg3 » 18 Sep 2014 08:38

c71clark wrote:So, what tool am I using to push these commands, and can it be done completely from the GUI?
No, you can't use GUI for commands. You need a shell.

you can use the shell of BSD (option 6)

Code: Select all

"Welcome to NAS4Free"
"*********************" 
1) Assign Interface
2) Set LAN IP address
3) Reset WebGUI password
4) Reset to factory defaults
5) Ping host
6) Shell
7) Reboot system
8) Shutdown system

or you can use putty to do the same if do not have a keyboard & a monitor direct attached to your NAS.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

c71clark
Starter
Starter
Posts: 15
Joined: 07 Sep 2014 17:05
Status: Offline

Re: Owncloud [HOWTO]

#14

Post by c71clark » 18 Sep 2014 14:42

Thanks, I will give it a shot. But to be clear, we can't use the "Advanced|Command" page? If not, what is this used for?

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4974
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Owncloud [HOWTO]

#15

Post by raulfg3 » 18 Sep 2014 15:28

its used for small commands like dd df etc that offers an output and do not need user interaction.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

schafferm
NewUser
NewUser
Posts: 6
Joined: 09 Jun 2014 14:56
Status: Offline

Re: Owncloud [HOWTO] increase tmp space

#16

Post by schafferm » 27 Dec 2014 23:48

Hi.

I'm trying to change the default lighttpd_uploaddir=${lighttpd_uploaddir:-"/var/tmp"} to point to a tmp directory on one of my mounted drives.

Should I put the following statement into the Auxiliary Parameters under Webserver as

lighttpd_uploaddir=${lighttpd_uploaddir:-"/mnt/drive1/tmp"} ? or am I missing something?

vladobs
NewUser
NewUser
Posts: 1
Joined: 10 Sep 2012 22:31
Status: Offline

Re: Owncloud [HOWTO]

#17

Post by vladobs » 01 Jan 2015 14:57

Hi,

I successfully installed ownCloud on 9.3.0.2 - Nayla (revision 1213) full, but cannot set the upload database directory to be on mounted hdd /where owncloud temp folder was created, as it is pointed in instructions above/.
Currently, when I upload something, it is uploaded on the usb drive, where nass4free and owncloud are installed. There are only 4GB free space and it is useless for upload.
How to set that everything as files, to be uploaded on mount hdd, not on usb drive?

Thank you.

NASKnight
NewUser
NewUser
Posts: 1
Joined: 28 Dec 2014 04:07
Status: Offline

Re: Owncloud [HOWTO]

#18

Post by NASKnight » 02 Jan 2015 04:06

I have for the past 2.5 hours tried to install the Owncloud 7.04.
I have used the instruction from here and viewtopic.php?f=48&t=1606
Realizing that I couldn't install on the embedded files I am installing on /mnt/Web (It was easy that way).
Expansion into /owncloud has failed . the message is an error for "failed to write" or "write to restore size failed". I used both tar zxvf and tar xvf (I have no idea what the switches do but I am just following instructions)
I have been through several options multiple deletes and do overs. I even went as far as to totally unpack the tar from my computer and transfer via Winscp, but transfer gets part way and suddenly gives me a "4" error or "2" error (Shows up in the subfiles under apps). I deduce there is possibly something wrong with the Original .tar file from Owncloud preventing proper decompression?

EDIT: Oh Wow. Just learned something about the /mnt directory. /mnt is still part of the embedded install. When I moved up to my share folders it installed. (pretty sure I tried that and it failed so...)

I am working off v.9.3.0.2
Owncloud 7.04.01
PuTY
WinSCP

rbscycle
Starter
Starter
Posts: 16
Joined: 26 Dec 2012 02:14
Location: Peterborough, Ontario, Canada
Status: Offline

Re: Owncloud [HOWTO]

#19

Post by rbscycle » 05 Feb 2015 17:04

I also installed owncloud on 9.3.0.2. I'm having issues creating the secure aspect with https.
openssl req -new -x509 -nodes -sha1 -days 365 -newkey rsa:1024 >testkb.cert
is creating the testkb.cert file empty!!! No certificate into!!!

UPDATE:
The information from the openssl header in incorrect. Strange but true.
Thy thisMethod (1)

LIST THE FILES IN TH CURRENT WORKING DIRECTORY
ronnie@ronnie-Aspire-R3610:~/.ssh$ ls -l
total 16
-rw-rw-r-- 1 ronnie ronnie 4792 Feb 6 23:44 notes
-rw-rw-r-- 1 ronnie ronnie 4721 Feb 6 15:02 notes~
EXECUTE OPENSSL
ronnie@ronnie-Aspire-R3610:~/.ssh$ openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout privkey.pem -out test.csr
Generating a 2048 bit RSA private key
..+++
.......................+++
unable to write 'random state'
writing new private key to 'privkey.pem'
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
THE ABOVE IS SUGGESTING THAT YOU MAY PLACE A "." TO LEAVE THE FIELD BANK!
THIS DOES NOT WORK! YOUR .csr FILE WILL BE EMPTY!!!

Country Name (2 letter code) [AU]:.
State or Province Name (full name) [Some-State]:.
Locality Name (eg, city) []:.
Organization Name (eg, company) [Internet Widgits Pty Ltd]:.
Organizational Unit Name (eg, section) []:.
Common Name (e.g. server FQDN or YOUR name) []:.
Email Address []:.
error, no objects specified in config file
problems making Certificate Request
ronnie@ronnie-Aspire-R3610:~/.ssh$ ls -l
total 20
-rw-rw-r-- 1 ronnie ronnie 4792 Feb 6 23:44 notes
-rw-rw-r-- 1 ronnie ronnie 4721 Feb 6 15:02 notes~
-rw-rw-r-- 1 ronnie ronnie 1704 Feb 6 23:45 privkey.pem

ronnie@ronnie-Aspire-R3610:~/.ssh$ openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout privkey.pem -out test.csr
Generating a 2048 bit RSA private key
.....+++
........................................................................+++
unable to write 'random state'
writing new private key to 'privkey.pem'
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
THIS TIME I HAVE PLACED 2 '..', BECAUSE: Country Name (2 letter code) [AU]:
Country Name (2 letter code) [AU]:..
State or Province Name (full name) [Some-State]:..
Locality Name (eg, city) []:..
Organization Name (eg, company) [Internet Widgits Pty Ltd]:..
Organizational Unit Name (eg, section) []:..
Common Name (e.g. server FQDN or YOUR name) []:..
Email Address []:..
ronnie@ronnie-Aspire-R3610:~/.ssh$ ls -l
total 24
-rw-rw-r-- 1 ronnie ronnie 4792 Feb 6 23:44 notes
-rw-rw-r-- 1 ronnie ronnie 4721 Feb 6 15:02 notes~
-rw-rw-r-- 1 ronnie ronnie 1704 Feb 6 23:45 privkey.pem
-rw-rw-r-- 1 ronnie ronnie 1302 Feb 6 23:45 test.csr
ronnie@ronnie-Aspire-R3610:~/.ssh$
THIS TIME IT WORKS!!!
I have been trying different things for 2 weeks! This time I have it working.
Hopefully this will save someone some time and frustration.
Last edited by rbscycle on 07 Feb 2015 06:01, edited 1 time in total.

chrisf4lc0n
Advanced User
Advanced User
Posts: 265
Joined: 07 May 2013 13:15
Location: West Drayton (London)
Status: Offline

Re: Owncloud [HOWTO]

#20

Post by chrisf4lc0n » 06 Feb 2015 09:03

The Owncloud should generate their own certs...
Watercooling is just the beginning ;)

chaoman_us
NewUser
NewUser
Posts: 2
Joined: 11 Jun 2015 21:46
Status: Offline

Re: Owncloud [HOWTO]

#21

Post by chaoman_us » 11 Jun 2015 22:23

chrisf4lc0n wrote:
1. Install ssmtp:

Code: Select all

pkg_add -rv ssmtp
rehash

Thanks for the ssmtp tutorial. I was able to follow it and configured owncloud to send email out with ssmtp. However, every time after I restart my nas4free server, I have to manually install ssmtp again. Below is the build version of my nas4free.
  • Version 9.3.0.2 - Nayla (revision 1349)
  • Build date Tue Feb 10 02:53:59 CET 2015
  • Platform OS FreeBSD Revision: 199506
  • FreeBSD 9.3-RELEASE-p9 #0 r278463M: Mon Feb 9 18:31:18 CET 2015
I could not use pkg_add but instead, I was able to issue

Code: Select all

pkg install ssmtp
. Here is my question, is there a way that I can script the installation? I tried putting pkg install ssmtp into the postInit command script found under System -> Advanced but it did not work. I figure that the problem is due to a answer [y/N] prompt during the installation. Can someone please guide me how to automatically supply the answer "y" when attempting to run install ssmtp with the

Code: Select all

pkg install ssmtp
command? Below is the result when I tried to run the pkg install ssmtp.

Code: Select all

nas4free: etc # pkg install ssmtp
Updating FreeBSD repository catalogue...
FreeBSD repository is up-to-date.
All repositories are up-to-date.
The following 1 packages will be affected (of 0 checked):

New packages to be INSTALLED:
        ssmtp: 2.64_1

The process will require 37 KiB more space.
18 KiB to be downloaded.

Proceed with this action? [y/N]: y

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4974
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Owncloud [HOWTO]

#22

Post by raulfg3 » 12 Jun 2015 07:37

chaoman_us wrote:
chrisf4lc0n wrote:
  • Version 9.3.0.2 - Nayla (revision 1349)
  • Build date Tue Feb 10 02:53:59 CET 2015
  • Platform OS FreeBSD Revision: 199506
  • FreeBSD 9.3-RELEASE-p9 #0 r278463M: Mon Feb 9 18:31:18 CET 2015
[/code]
You need full install to make changes persistent.

live install, changes are lost on reboot
embeded , changes are persistent only if changes are doing in webGUI, and lost changes doing in shell.
full = all changes are persistent
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

chaoman_us
NewUser
NewUser
Posts: 2
Joined: 11 Jun 2015 21:46
Status: Offline

Re: Owncloud [HOWTO]

#23

Post by chaoman_us » 12 Jun 2015 09:05

raulfg3 wrote: full = all changes are persistent
I see. Thank you for pointing this out. I will try to install the full version when I make an upgrade next time.

Post Reply

Return to “WebServer”