Latest News:
*New 11.2 series Release:
2019-06-20: XigmaNAS 11.2.0.4.6766 - released!

*New 12.0 series Release:
2019-06-20: XigmaNAS 12.0.0.4.6766 - released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

Configuration Settings LCDProc CRYSTALFONTZ CFA 635

Stats via an mini LCD displays.
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
dantok
NewUser
NewUser
Posts: 1
Joined: 08 Oct 2012 14:01
Status: Offline

Configuration Settings LCDProc CRYSTALFONTZ CFA 635

#1

Post by dantok » 08 Oct 2012 14:05

The LCD Works with LCD Proc, my question is how to configure it in nas4free, what are the configuration files like?

tsrodger
Starter
Starter
Posts: 33
Joined: 17 Apr 2013 08:44
Location: Russia / St Petersburg
Status: Offline

Re: Configuration Settings LCDProc CRYSTALFONTZ CFA 635

#2

Post by tsrodger » 13 Apr 2019 19:04

I know that thread is old, but yesterday I spent some time to adjust this module. So here is brief, but fully working solution including keys and CrystalFontz onboard menu.

Driver

Code: Select all

CFontzPacket
I use USB version of board, so this version available in XigmaNAS as UART device.
Apr 12 20:19:15 kernel: uftdi0: <Crystalfontz CFA635-USB LCD> on usbus2
You can find correct device by listing /dev/ttyU*

Driver Parameter

Code: Select all

Device=/dev/ttyU0
Model=635
Contrast=400
Brightness=100
OffBrightness=0
UpKey = 0x01
EnterKey = 0x02
MenuKey = 0x04
LeftKey = 0x08
RightKey = 0x10
DownKey = 0x20
Client

Code: Select all

[CPU]
Active=true
OnTime=1
OffTime=2
ShowInvisible=false
[Iface]
Active=True
Interface0=em0
Alias0=LAN
unit=bit
#Interface1=em0
#Alias1=WAN
[Iface]
Active=false
Interface0=re0
Alias0=LAN
#Interface1=em0
#Alias1=WAN
#Interface2=em1
#Alias2=MGMT
#transfer=TRUE
[Memory]
Active=false
[Load]
Active=false
LowLoad=0.05
HighLoad=1.3
[TimeDate]
Active=false
TimeFormat="%H:%M:%S"
DateFormat="%x"
[About]
Active=false
[SMP-CPU]
Active=false
[OldTime]
Active=false
TimeFormat="%H:%M:%S"
DateFormat="%x"
[BigClock]
Active=false
[Uptime]
Active=true
[Battery]
Active=false
[CPUGraph]
Active=true
[ProcSize]
Active=false
[Disk]
Active=false
[MiniClock]
Active=false
TimeFormat="%H:%M"
I think this will simplify setup CrystalFontz 635 in future for somebody

I look up for way to get control over build-in 4 leds, but currently i do not understand how to pass CMD 0x22 (Set GPIO) via LCDproc server
Fractal Design XL / ASUS P5K WS / Intel E6850 / 8GB / Intel EXPI9301CTBLK / 2x PCI Sil3114 / 9x HDD

Post Reply

Return to “LCDproc”