*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released

*New 12.0 series Release:
2019-10-05: XigmaNAS 12.0.0.4.6928 - released!

*New 11.2 series Release:
2019-09-23: XigmaNAS 11.2.0.4.6881 - released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

Can't Access Webgui

If you are new on this forum and you don't know where to post please use this sub-forum. Somebody will answer your question and/or will move your topic into the right sub-forum.
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
PoorYorick
NewUser
NewUser
Posts: 2
Joined: 11 May 2017 08:14
Status: Offline

Can't Access Webgui

#1

Post by PoorYorick » 31 Jul 2019 16:51

I put in the wrong ip address in my hosts allow, and now I can't get into my GUI. I've tried removing the lines from /var/etc/lighttpd.conf, but when I restart the service, those lines come back into the lighttpd.conf and keep me out. Is there a right way to do it?

User avatar
ms49434
Developer
Developer
Posts: 720
Joined: 03 Sep 2015 18:49
Location: Neuenkirchen-Vörden, Germany - GMT+1
Contact:
Status: Offline

Re: Can't Access Webgui

#2

Post by ms49434 » 31 Jul 2019 18:34

PoorYorick wrote:
31 Jul 2019 16:51
I put in the wrong ip address in my hosts allow, and now I can't get into my GUI. I've tried removing the lines from /var/etc/lighttpd.conf, but when I restart the service, those lines come back into the lighttpd.conf and keep me out. Is there a right way to do it?
Choose option 10 on the console screen
1) XigmaNAS 12.0.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U2, 22GB out of 32GB ECC RAM, LSI 9300-8i IT mode in passthrough mode. Pool 1: 2x HGST 10TB, mirrored, SLOG: Samsung 850 Pro, L2ARC: Samsung 850 Pro, Pool 2: 1x Samsung 860 EVO 1TB , services: Samba AD, CIFS/SMB, ftp, ctld, rsync, syncthing, zfs snapshots.
2) XigmaNAS 12.0.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U2, 8GB out of 32GB ECC RAM, IBM M1215 crossflashed, IT mode, passthrough mode, 2x HGST 10TB , services: rsync.

PoorYorick
NewUser
NewUser
Posts: 2
Joined: 11 May 2017 08:14
Status: Offline

Re: Can't Access Webgui

#3

Post by PoorYorick » 01 Aug 2019 16:57

Thanks. That's a good idea, but I had previously disabled my console menu. Is there a way to enable it over SSH?

User avatar
ms49434
Developer
Developer
Posts: 720
Joined: 03 Sep 2015 18:49
Location: Neuenkirchen-Vörden, Germany - GMT+1
Contact:
Status: Offline

Re: Can't Access Webgui

#4

Post by ms49434 » 01 Aug 2019 20:29

PoorYorick wrote:
01 Aug 2019 16:57
Thanks. That's a good idea, but I had previously disabled my console menu. Is there a way to enable it over SSH?
run

Code: Select all

/etc/rc.initial
from the command line
1) XigmaNAS 12.0.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U2, 22GB out of 32GB ECC RAM, LSI 9300-8i IT mode in passthrough mode. Pool 1: 2x HGST 10TB, mirrored, SLOG: Samsung 850 Pro, L2ARC: Samsung 850 Pro, Pool 2: 1x Samsung 860 EVO 1TB , services: Samba AD, CIFS/SMB, ftp, ctld, rsync, syncthing, zfs snapshots.
2) XigmaNAS 12.0.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U2, 8GB out of 32GB ECC RAM, IBM M1215 crossflashed, IT mode, passthrough mode, 2x HGST 10TB , services: rsync.

Post Reply

Return to “Newbie Questions”