*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released

*New 12.0 series Release:
2019-10-05: XigmaNAS 12.0.0.4.6928 - released!

*New 11.2 series Release:
2019-09-23: XigmaNAS 11.2.0.4.6881 - released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

Can't connect to server from windows

If you are new on this forum and you don't know where to post please use this sub-forum. Somebody will answer your question and/or will move your topic into the right sub-forum.
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
j19dasha
NewUser
NewUser
Posts: 9
Joined: 29 Oct 2018 23:10
Status: Offline

Can't connect to server from windows

#1

Post by j19dasha » 20 Sep 2019 22:27

i'm getting a strange error in windows: "The remote device won't accept the connection" (windows network diagnostics)

when i click details i get the following information:
The device or resource (192.168.1.101) is not set up to accept connections on port "The File and printer sharing (SMB)".

the ip, is the ip of the xigmanas server

i can reach that address in a browser from the windows machine eg i can connect to the web gui.

has anyone any thoughts?

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4923
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Can't connect to server from windows

#2

Post by raulfg3 » 20 Sep 2019 22:58

revise problems with SMB protocol, NT1 is deprecated.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

j19dasha
NewUser
NewUser
Posts: 9
Joined: 29 Oct 2018 23:10
Status: Offline

Re: Can't connect to server from windows

#3

Post by j19dasha » 20 Sep 2019 23:11

i'm sorry.

i have no idea what your reply means!

j19dasha
NewUser
NewUser
Posts: 9
Joined: 29 Oct 2018 23:10
Status: Offline

Re: Can't connect to server from windows

#4

Post by j19dasha » 20 Sep 2019 23:18

i have set: server min protocol to SMB2

and have tried various values for: server max. protocol
SMB3
SMB3_11 (windows 10)

neither of these work

User avatar
jerryone
Starter
Starter
Posts: 59
Joined: 22 Sep 2017 21:45
Location: Timisoara
Contact:
Status: Offline

Re: Can't connect to server from windows

#5

Post by jerryone » 21 Sep 2019 13:19

Hi,

I have attached my configuration. You can tray this and see if is working! Otherwise you need to put some of your screenshoot of your config! and also you need to activate if you whant in windows 10 SMB/CIFS 1.0
You do not have the required permissions to view the files attached to this post.
Dell T610 Xeon x5650 x2 , 192 GB DELL ECC, HBA 9211-8i LSI x2 , 7xHGST-4TB, 2xSamsung 1TB, , 1xKingston 128GB-SSD boot sys
CIFS/SMB, Syncthing, DLNA/UPnP MiniDLNA, BitTorrent, Plex Media Server

Post Reply

Return to “Newbie Questions”