*New 11.4 series Release:
2020-07-03: XigmaNAS 11.4.0.4.7633 - released!

*New 12.1 series Release:
2020-04-17: XigmaNAS 12.1.0.4.7542 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

WOL and HP microservers [SOLVED, but]

NIC, network controllers, compatibility questions, WOL, wake on lan
Forum rules
Set-Up GuideFAQsForum Rules
User avatar
ChriZathens
Forum Moderator
Forum Moderator
Posts: 799
Joined: 23 Jun 2012 09:14
Location: Athens, Greece
Contact:
Status: Offline

Re: WOL and HP microservers [SOLVED, but]

#61

Post by ChriZathens »

???????
I have yet to find some free time to upgrade...
I hope I will test a new installation in the next few days and post my results, too...
My Nas
  1. Case: Fractal Design Define R2
  2. M/B: Supermicro x9scl-f
  3. CPU: Intel Celeron G1620
  4. RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
  5. PSU: Chieftec 850w 80+ modular
  6. Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
  7. O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
  8. Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S

Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)

arinci
Starter
Starter
Posts: 17
Joined: 01 May 2014 08:18
Status: Offline

Re: WOL and HP microservers [SOLVED, but]

#62

Post by arinci »

tses wrote:I made the mistake updating to the latest version ...
The 9.3.0.2.1349 seems that does not detect the onboard LAN adapter at all.
I would appreciate any help or idea.

Yiannis
It's quite strange, I have updated my HP Microserver and the Broadcom onboard lan works fine.
I'm using WOL functionality almost daily and I'm experiencing no problem at all!

tses
NewUser
NewUser
Posts: 5
Joined: 07 Feb 2014 13:29
Status: Offline

Re: WOL and HP microservers [SOLVED, but]

#63

Post by tses »

Hi arinci,
I reinstalled 1349 and works fine including the WOL.
Probably something went wrong during the upgrade.
Thanks for your help !

User avatar
ChriZathens
Forum Moderator
Forum Moderator
Posts: 799
Joined: 23 Jun 2012 09:14
Location: Athens, Greece
Contact:
Status: Offline

Re: WOL and HP microservers [SOLVED, but]

#64

Post by ChriZathens »

OK, then, no worries...
A question, though.... Does WOL work on gigabit network, only, or on 10/100, too? (If it is easy to check)
My Nas
  1. Case: Fractal Design Define R2
  2. M/B: Supermicro x9scl-f
  3. CPU: Intel Celeron G1620
  4. RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
  5. PSU: Chieftec 850w 80+ modular
  6. Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
  7. O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
  8. Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S

Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)

Post Reply

Return to “LAN , Network controllers”