*New 11.4 series Release:
2020-07-03: XigmaNAS 11.4.0.4.7633 - released!

*New 12.1 series Release:
2020-04-17: XigmaNAS 12.1.0.4.7542 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

wol trouble

NIC, network controllers, compatibility questions, WOL, wake on lan
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
yanqc
Starter
Starter
Posts: 21
Joined: 24 Oct 2013 18:42
Status: Offline

wol trouble

#1

Post by yanqc »

hI guys,

I received my intel expi9301ctblk in the mail two days and I can't turn on my server from my plex or trying to reach it's ip address from my browser. I would like it to automatically turn on when a user tries to access it.


- Weirdly, when I use an application called WakeMeOnLan to wake it up from my pc, it works. But it won't work from the browser.
- Bios PCI-E and PCI are set to power turn on.
- LAN option set to autoselect and WOL_Magic, shows full duplex in ifconfig

Code: Select all

$ ifconfig
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
	ether 68:05:ca:2b:ec:4d
	inet 192.168.2.150 netmask 0xffffff00 broadcast 192.168.2.255
	inet6 fe80::6a05:caff:fe2b:ec4d%em0 prefixlen 64 scopeid 0x5 
	inet 192.168.2.155 netmask 0xffffff00 broadcast 192.168.2.255
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0xb 
	inet 127.0.0.1 netmask 0xff000000 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
Thank you for your input :D
ASUS P5E, x64-embedded on Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz. 8 gigs of RAM. Raidz2 : 9 x WD Red 3Tb.
Version : 10.3.0.3 - Pilingitam (revision 2987)

User avatar
ChriZathens
Forum Moderator
Forum Moderator
Posts: 799
Joined: 23 Jun 2012 09:14
Location: Athens, Greece
Contact:
Status: Offline

Re: wol trouble

#2

Post by ChriZathens »

AFAIK such thing is not possible...
You first have to send the magic packet using a program like wakemeonlan and then, after it boots, access the webui and/or shares...
I might be wrong, though...




LATER EDIT: Unfortunately i was not much help, but perhaps you can help me by posting your nas4free version and the output of

Code: Select all

dmesg | grep em0
My Nas
  1. Case: Fractal Design Define R2
  2. M/B: Supermicro x9scl-f
  3. CPU: Intel Celeron G1620
  4. RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
  5. PSU: Chieftec 850w 80+ modular
  6. Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
  7. O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
  8. Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S

Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)

yanqc
Starter
Starter
Posts: 21
Joined: 24 Oct 2013 18:42
Status: Offline

Re: wol trouble

#3

Post by yanqc »

Awww, thank you. I was hoping I could just click on my network location on my pc or while starting Plex on other devices they would send the necessary signal to turn my server on.

I'm on embedded NAS4Free 9.3.0.2 (1310)

Code: Select all

$ dmesg | grep em0
em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0xdc00-0xdc1f mem 0xfeae0000-0xfeafffff,0xfea00000-0xfea7ffff,0xfeadc000-0xfeadffff irq 19 at device 0.0 on pci3
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: 68:05:ca:2b:ec:4d
ASUS P5E, x64-embedded on Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz. 8 gigs of RAM. Raidz2 : 9 x WD Red 3Tb.
Version : 10.3.0.3 - Pilingitam (revision 2987)

User avatar
ChriZathens
Forum Moderator
Forum Moderator
Posts: 799
Joined: 23 Jun 2012 09:14
Location: Athens, Greece
Contact:
Status: Offline

Re: wol trouble

#4

Post by ChriZathens »

Specifically for plex, there might be an add-on that is able to do this...
E.g I use xbmc and there is a wol add-on which can be configured to run when xbmc starts.
So for example, if your xbmc plays files from a NAS, it will wake the NAS when it is starting.
See if something similar exists for Plex

P.s.: thanks for dmesg
My Nas
  1. Case: Fractal Design Define R2
  2. M/B: Supermicro x9scl-f
  3. CPU: Intel Celeron G1620
  4. RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
  5. PSU: Chieftec 850w 80+ modular
  6. Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
  7. O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
  8. Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S

Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)

yanqc
Starter
Starter
Posts: 21
Joined: 24 Oct 2013 18:42
Status: Offline

Re: wol trouble

#5

Post by yanqc »

thank you for the clear answers.

Seems like my solution lies in flashing my router to a DD-WRT firmware and creating a VLAN as suggested here : https://forums.plex.tv/index.php/topic/ ... -location/
ASUS P5E, x64-embedded on Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz. 8 gigs of RAM. Raidz2 : 9 x WD Red 3Tb.
Version : 10.3.0.3 - Pilingitam (revision 2987)

User avatar
ChriZathens
Forum Moderator
Forum Moderator
Posts: 799
Joined: 23 Jun 2012 09:14
Location: Athens, Greece
Contact:
Status: Offline

Re: wol trouble

#6

Post by ChriZathens »

Cool, then... As long as your router supports DD-WRT you are good to go..
My Nas
  1. Case: Fractal Design Define R2
  2. M/B: Supermicro x9scl-f
  3. CPU: Intel Celeron G1620
  4. RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
  5. PSU: Chieftec 850w 80+ modular
  6. Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
  7. O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
  8. Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S

Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)

Post Reply

Return to “LAN , Network controllers”