*New 11.4 series Release:
2020-07-03: XigmaNAS 11.4.0.4.7633 - released!

*New 12.1 series Release:
2020-04-17: XigmaNAS 12.1.0.4.7542 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

Redirect PORT (connect outside LAN)

NIC, network controllers, compatibility questions, WOL, wake on lan
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
Flammeur
NewUser
NewUser
Posts: 3
Joined: 23 Aug 2015 11:48
Status: Offline

Redirect PORT (connect outside LAN)

#1

Post by Flammeur »

Hello folks,

I have recently setup a nas4free. Everything work only the connection from outside the lan does not work. I have open the port between 80 and 5000 on TCP but when i try the IP of my BOX in my browser i can not connect to the nas .

http://imageshack.com/a/img537/7180/Yl0sd1.png

If i missed anything please let me know!

User avatar
ChriZathens
Forum Moderator
Forum Moderator
Posts: 799
Joined: 23 Jun 2012 09:14
Location: Athens, Greece
Contact:
Status: Offline

Re: Redirect PORT (connect outside LAN)

#2

Post by ChriZathens »

First of all, you should not open a range of ports between 80 and 5000. Open either 80 or 443, depending on if you use http or https to access the webui.
Second it is not the ip of the NAS you should enter to access it from outside, it is the external (wan) address of your network.
My Nas
  1. Case: Fractal Design Define R2
  2. M/B: Supermicro x9scl-f
  3. CPU: Intel Celeron G1620
  4. RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
  5. PSU: Chieftec 850w 80+ modular
  6. Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
  7. O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
  8. Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S

Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)

User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2454
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Redirect PORT (connect outside LAN)

#3

Post by b0ssman »

i would strongly suggest not to do this unless you know exactly what you are doing.

the web gui will also by default not answer to any ip outside the local lan address range.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.

Flammeur
NewUser
NewUser
Posts: 3
Joined: 23 Aug 2015 11:48
Status: Offline

Re: Redirect PORT (connect outside LAN)

#4

Post by Flammeur »

Thank you for your answer , I knnow i should not open a range of port but i am desperate, I am using http and i did enter the ip of my network there is nothing else to configure either the nas or the box?

User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2454
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Redirect PORT (connect outside LAN)

#5

Post by b0ssman »

see if your router supports vpn. that would be a way better solution.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.

Flammeur
NewUser
NewUser
Posts: 3
Joined: 23 Aug 2015 11:48
Status: Offline

Re: Redirect PORT (connect outside LAN)

#6

Post by Flammeur »

ok i check that thank you.

Post Reply

Return to “LAN , Network controllers”