*New 12.1 series Release:
2019-11-08: XigmaNAS 12.1.0.4.7091 - released!

*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

LSI SAS 9207-4i4e firmware/BIOS/driver set

Hard disks, HDD, RAID Hardware, disk controllers, SATA, PATA, SCSI, IDE, On Board, USB, Firewire, CF (Compact Flash)
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
asavage
Starter
Starter
Posts: 15
Joined: 26 Jun 2012 23:32
Location: Duvall, Wash., USA
Contact:
Status: Offline

LSI SAS 9207-4i4e firmware/BIOS/driver set

#1

Post by asavage » 02 Jan 2016 20:05

I am setting up a 9207 to operate with 10.2.0.2.2235

I've read that it's best to keep the firmware level matched to the FreeBSD driver level, but I do not know what the driver level is in this version.

(I've also read to avoid P20)

What Pxx firmware level do I want?
Regards,
Al S.

User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2458
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: LSI SAS 9207-4i4e firmware/BIOS/driver set

#2

Post by b0ssman » 02 Jan 2016 22:33

you want the same level as the driver.
see the dmesg output for the driver version.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.

asavage
Starter
Starter
Posts: 15
Joined: 26 Jun 2012 23:32
Location: Duvall, Wash., USA
Contact:
Status: Offline

Re: LSI SAS 9207-4i4e firmware/BIOS/driver set

#3

Post by asavage » 02 Jan 2016 23:34

The driver version is 20, so I suppose I'm stuck using the P20 firmware.
Regards,
Al S.

Post Reply

Return to “Hard disk & controller”