*New 12.1 series Release:
2019-11-08: XigmaNAS 12.1.0.4.7091 - released!

*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

hdd standby

Hard disks, HDD, RAID Hardware, disk controllers, SATA, PATA, SCSI, IDE, On Board, USB, Firewire, CF (Compact Flash)
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
lasdem
Starter
Starter
Posts: 21
Joined: 29 Jul 2012 20:18
Location: Austria
Status: Offline

hdd standby

#1

Post by lasdem » 29 Aug 2012 20:54

I feel like something is keeping the hard disks in my nas from spinning down.
I had the disks configured to spin down after 2 hours of no activity, but i now reduced it to 30 min.
Could it be SMART? I had it on and to runa check every 30 min, but not when in standby or sleep. Now I raised the time to 60min.
Or maybe it is ZFS, is ZTF doing checks while the pool is online?

Also where can i actually see if my HDDs have spun down, apart from triying to hear the difference?
NAS4Free 9.1.0.1-573 x64-embedded, 2GB RAM
Acer H340 WG945GCM, Intel Atom 230 (1.6Ghz Dual Core)
2x2TB WD20EARS + 2x2TB WD20EARX (all encrypted) in RaidZ1

Post Reply

Return to “Hard disk & controller”