*New 12.1 series Release:
2019-11-08: XigmaNAS 12.1.0.4.7091 - released!

*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

One HDD isn't going to standby

Hard disks, HDD, RAID Hardware, disk controllers, SATA, PATA, SCSI, IDE, On Board, USB, Firewire, CF (Compact Flash)
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
dominos96
NewUser
NewUser
Posts: 2
Joined: 15 Mar 2016 13:42
Location: Poland
Status: Offline

One HDD isn't going to standby

#1

Post by dominos96 » 24 Mar 2016 16:44

Hi,
I have two 500GB HDD's in my NAS in RAID0, first is TOSHIBA MK5059GSXP and second HGST HTS725050A7E630.
My problem is only first drive is going to standby, before update to 2433 I don't have this problem.
In both drives power management is set at 1, 64 or 127 level, and this doesn't make change.
Anyone have an idea how to fix this?

PS Sorry for my english ;)
NAS4Free 10.2.0.2.2433 (x64-embedded), ASUS E35M1-M PRO, AMD E-350, 4GB, 2x500GB RAID0

dominos96
NewUser
NewUser
Posts: 2
Joined: 15 Mar 2016 13:42
Location: Poland
Status: Offline

Re: One HDD isn't going to standby

#2

Post by dominos96 » 26 Mar 2016 01:22

I fixed this... probably
I just swapped cables of both HDD's, for now everything works.
NAS4Free 10.2.0.2.2433 (x64-embedded), ASUS E35M1-M PRO, AMD E-350, 4GB, 2x500GB RAID0

Post Reply

Return to “Hard disk & controller”