*New 11.4 series Release:
2020-07-03: XigmaNAS - released!

*New 12.1 series Release:
2020-04-17: XigmaNAS - released

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

RAID1 restore data

Hard disks, HDD, RAID Hardware, disk controllers, SATA, PATA, SCSI, IDE, On Board, USB, Firewire, CF (Compact Flash)
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
Posts: 1
Joined: 25 Aug 2016 10:47
Status: Offline

RAID1 restore data


Post by nnd_newbie »


I had RAID 1 in FreeNAS 0.7.2 after two power down one disk is almost failure and whole RAID is broken. During bootup i get message:

Code: Select all

GEOM_MIRROR: Device RAID1 destroyed
I would like to get as much data as possible from one disk or another. How can I do it? I have access to pc with linux and WIndows.

User avatar
Forum Moderator
Forum Moderator
Posts: 2454
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: RAID1 restore data


Post by b0ssman »

boot the system with only one drive attached.

if that doesnt work try ufsexplorer
Nas4Free Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.

Post Reply

Return to “Hard disk & controller”