*New 11.3 series Release:
2019-10-05: XigmaNAS 11.3.0.4.6928 - released, 11.2 series are soon unsupported!

*New 12.0 series Release:
2019-10-05: XigmaNAS 12.0.0.4.6928 - released!

*New 11.2 series Release:
2019-09-23: XigmaNAS 11.2.0.4.6881 - released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

MegaRAID SAS 9341-8i

Hard disks, HDD, RAID Hardware, disk controllers, SATA, PATA, SCSI, IDE, On Board, USB, Firewire, CF (Compact Flash)
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
RizONE
NewUser
NewUser
Posts: 4
Joined: 27 Jun 2018 09:56
Status: Offline

MegaRAID SAS 9341-8i

#1

Post by RizONE » 27 Jun 2018 14:46

Hi
I have MegaRAID SAS 9341-8i controller with 6x10 Tb and 2x500 Gb HDDs
I have run nas4free from LiveUSB.
I have configured 6x10 Tb HDD: have created pool and datasets
I would like install nas4free from LiveUSB to RAID1 made on 2x500 Gb HDDs
When I try install it (choosing #9 in nas4free console menu) I see 2 different 500 GB HDD
What steps I should perform to create RAID1 and install nas4free?

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4921
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: MegaRAID SAS 9341-8i

#2

Post by raulfg3 » 27 Jun 2018 22:33

use RootOnZFS install and mirror ( select both disk) to install is what you want but fully supported (Boot disk in Raid1 mode is not supported by default), you can go for this way , but is easy as I describe.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

RizONE
NewUser
NewUser
Posts: 4
Joined: 27 Jun 2018 09:56
Status: Offline

Re: MegaRAID SAS 9341-8i

#3

Post by RizONE » 28 Jun 2018 16:38

Thanks a lot raulfg3, will try as you say

RizONE
NewUser
NewUser
Posts: 4
Joined: 27 Jun 2018 09:56
Status: Offline

Re: MegaRAID SAS 9341-8i

#4

Post by RizONE » 02 Jul 2018 13:53

solved

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4921
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: MegaRAID SAS 9341-8i

#5

Post by raulfg3 » 02 Jul 2018 14:16

Please share your experience so other users can decide what to do in similar cases.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

Post Reply

Return to “Hard disk & controller”