*New 12.1 series Release:
2019-11-08: XigmaNAS 12.1.0.4.7091 - released!

*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

11.2... software problem with SATA PMP controller

Hard disks, HDD, RAID Hardware, disk controllers, SATA, PATA, SCSI, IDE, On Board, USB, Firewire, CF (Compact Flash)
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
MarSOnEarth
NewUser
NewUser
Posts: 2
Joined: 15 Nov 2014 22:30
Status: Offline

11.2... software problem with SATA PMP controller

#1

Post by MarSOnEarth » 29 Jul 2018 00:59

Twice I tried to update from 11.1.0.4.5321 to either of the two 11.2.... releases, and both versions fail to make available HDs on eSATA interface. Reverting back to 11.1 version "fixes" the problem.

Here's what shows in the system.log:

Code: Select all

# This is what happens under 11.1... (when things are OK)
Jul 28 10:04:21 mag kernel: ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd41f mem 0xfbeffc00-0xfbeffdff irq 18 at device 0.0 on pci2
Jul 28 10:04:21 mag kernel: ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
Jul 28 10:04:21 mag kernel: ahci0: quirks=0xc00000<NOCCS,NOAUX>
Jul 28 10:04:21 mag kernel: ahcich0: <AHCI channel> at channel 0 on ahci0
Jul 28 10:04:21 mag kernel: ahcich1: <AHCI channel> at channel 1 on ahci0
# ...
Jul 28 10:04:21 mag kernel: pmp0 at ahcich0 bus 0 scbus0 target 15 lun 0
Jul 28 10:04:21 mag kernel: pmp0: <Port Multiplier 575f197b 000e> ATA device
Jul 28 10:04:21 mag kernel: pmp0: 600.000MB/s transfers (SATA 3.x, NONE, PIO 8192bytes)
Jul 28 10:04:21 mag kernel: pmp0: 15 fan-out ports
# ...
Jul 28 10:04:21 mag kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
# ...
Jul 28 10:04:21 mag kernel: ada1 at ahcich0 bus 0 scbus0 target 1 lun 0
# ...
Jul 28 10:04:21 mag kernel: ada2 at ahcich0 bus 0 scbus0 target 2 lun 0
# ...
Jul 28 10:04:21 mag kernel: ada3 at ahcich0 bus 0 scbus0 target 3 lun 0
# ...
# And this is what system .log shows under 11.2...

Code: Select all

Jul 28 08:56:59 mag kernel: ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd41f mem 0xfbeffc00-0xfbeffdff irq 18 at device 0.0 on pci2
Jul 28 08:56:59 mag kernel: ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
Jul 28 08:56:59 mag kernel: ahci0: quirks=0xc00000<NOCCS,NOAUX>
Jul 28 08:56:59 mag kernel: ahcich0: <AHCI channel> at channel 0 on ahci0
Jul 28 08:56:59 mag kernel: ahcich1: <AHCI channel> at channel 1 on ahci0
# ...
Jul 28 08:56:59 mag kernel: pmp0 at ahcich0 bus 0 scbus0 target 15 lun 0
Jul 28 08:56:59 mag kernel: pmp0: <Port Multiplier 575f197b 000e> ATA device
Jul 28 08:56:59 mag kernel: pmp0: 600.000MB/s transfers (SATA 3.x, NONE, PIO 8192bytes)
Jul 28 08:56:59 mag kernel: pmp0: 15 fan-out ports
....and that's all that can be seen as part of the boot process, but this is what happens when the PMP IF is reset

Code: Select all

Jul 28 09:21:00 mag kernel: pmp0 at ahcich0 bus 0 scbus0 target 15 lun 0
Jul 28 09:21:00 mag kernel: pmp0: <Port Multiplier 575f197b 000e> detached
Jul 28 09:21:00 mag kernel: (pmp0:ahcich0:0:15:0): Periph destroyed
Jul 28 09:21:16 mag kernel: pmp0 at ahcich0 bus 0 scbus0 target 15 lun 0
Jul 28 09:21:16 mag kernel: pmp0: <Port Multiplier 575f197b 000e> ATA device
Jul 28 09:21:16 mag kernel: pmp0: 600.000MB/s transfers (SATA 3.x, NONE, PIO 8192bytes)
Jul 28 09:21:16 mag kernel: pmp0: 15 fan-out ports
Jul 28 09:21:18 mag kernel: ada3 at ahcich0 bus 0 scbus0 target 0 lun 0
Jul 28 09:21:18 mag kernel: ada3: <ST31500341AS CC1J> ATA8-ACS SATA 2.x device
# ... (HD params)
Jul 28 09:21:18 mag kernel: ada4 at ahcich0 bus 0 scbus0 target 1 lun 0
Jul 28 09:21:18 mag kernel: ada4: <WDC WD20EURS-63S48Y0 51.0AB51> ATA8-ACS SATA 2.x device
# ...
Jul 28 09:21:18 mag kernel: ada5 at ahcich0 bus 0 scbus0 target 2 lun 0
# ...
Jul 28 09:21:18 mag kernel: ada6 at ahcich0 bus 0 scbus0 target 3 lun 0
# ...
Jul 28 09:23:17 mag kernel: ada3 at ahcich0 bus 0 scbus0 target 0 lun 0
Jul 28 09:23:17 mag kernel: ada3: <ST31500341AS CC1J> s/n 9VS0NF7T detached
Jul 28 09:23:17 mag kernel: ada4 at ahcich0 bus 0 scbus0 target 1 lun 0
Jul 28 09:23:17 mag kernel: ada4: <WDC WD20EURS-63S48Y0 51.0AB51> s/n WD-WCAZAL854886 detached
Jul 28 09:23:17 mag kernel: ada5 at ahcich0 bus 0 scbus0 target 2 lun 0
Jul 28 09:23:17 mag kernel: ada5: <WDC WD20EURS-73SPKY0 80.00A80> s/n WD-WMC1T1391118 detached
Jul 28 09:23:17 mag kernel: ada6 at ahcich0 bus 0 scbus0 target 3 lun 0
Jul 28 09:23:17 mag kernel: ada6: <WDC WD20EURS-63S48Y0 51.0AB51> s/n WD-WCAZAL985200 detached
Jul 28 09:23:17 mag kernel: (ada3:ahcich0:0:0:0): Periph destroyed
Jul 28 09:23:17 mag kernel: (ada5:ahcich0:0:2:0): Periph destroyed
Jul 28 09:23:17 mag kernel: (ada4:ahcich0:0:1:0): Periph destroyed
Jul 30 09:23:17 mag kernel: (ada6:ahcich0:0:3:0): Periph destroyed
Thanks for any insights.

Post Reply

Return to “Hard disk & controller”