Page 1 of 1

4 NIC`s 2 different VLAN (services)

Posted: 30 Aug 2012 15:46
by lindsay
ON my LAN side i use a build in realtek and an intel card re0,em0
On the other OPT2,OPT3 is 2 intel cards em1,em2

LAN side has 192.168.0.0/24
OPT2/OPT3 is on 192.168.10.0/24

The question is will all services work on both?

Re: 4 NIC`s 2 different VLAN (services)

Posted: 26 Oct 2016 12:15
by xr4t3d
Lindsay,

Not sure if I'm too late or if you already fixed your inquiry, however better late than never?!?!

With regards to your question, I think I understand what you may be asking here. Judging on the devices, they are located on two separate subnet blocks.

LAN SIDE: 192.168.0.0/24
OPT2/OPT3: 192.168.10.0/24

Now, depending on if you router is able to support secondary IP addresses then sure, it may work. If this is a home setup, you may want to see about putting them on 1 subnet. Once either of these are accomplished your devices should work fine.

Also, I just realized you put VLAN in the subject line, with that being said, what pieces of equipment are you using? Cisco Routers/Switches?

Please let me know if you have any questions on this, I'm pretty sure we can figure this out!

Thanks | Regards,

John.