*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released

*New 12.0 series Release:
2019-10-05: XigmaNAS 12.0.0.4.6928 - released!

*New 11.2 series Release:
2019-09-23: XigmaNAS 11.2.0.4.6881 - released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

Dlink-DIR 825 link speed issue

Routers, switch, hub, LAN, WAN, port forwarding, configuration etc go here
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
sene4kin
Starter
Starter
Posts: 18
Joined: 17 Sep 2015 16:44
Status: Offline

Dlink-DIR 825 link speed issue

#1

Post by sene4kin » 17 Sep 2015 16:58

Hello there! Can you help me please. I installed Nas4free 10.2.0.2 server connected with my router Dlink-DIR 825. Server receives DHCP reserved IP address. Evrth works fine until i manually reboot the server. After that speed drops down significantly - from 100 mbits before - to 0.8 mbit per sec after. But when i do manually re-assign DHCP address (press 2nd option in the server) - evrth goes back to normal again..until the next reboot. What can be wrong?
I had been using Freenas 9.2 for 1 year before switched to Nas4free and never encountered this kinda issue.
Sorry, i must say i'm a complete noob wth FreeBSD. )

User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2458
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Dlink-DIR 825 link speed issue

#2

Post by b0ssman » 17 Sep 2015 17:14

please post the required information about your hardware.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.

sene4kin
Starter
Starter
Posts: 18
Joined: 17 Sep 2015 16:44
Status: Offline

Re: Dlink-DIR 825 link speed issue

#3

Post by sene4kin » 17 Sep 2015 18:19

FreeBSD Revision: 199506
FreeBSD 10.2-RELEASE-p2 #0 r287260M: Fri Aug 28 18:37:35 CEST 2015
x86-embedded Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz
ASUSTeK Computer INC. P5KPL-AM EPU
3gb RAM
ada0 WDC WD20EARX-008FB0 Western Digital Green 1907730MB
ada1 ST31000528AS Seagate Barracuda 7200.12 953870MB
Installed on USB 8 gb
Router D-link Dir-825 Hardware Version: B1 Firmware Version: 2.09WW

User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2458
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Dlink-DIR 825 link speed issue

#4

Post by b0ssman » 17 Sep 2015 18:51

well it could be a problem of your nic? realtek are known to be crap.

or the dir 825. you could try openwrt on it.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.

sene4kin
Starter
Starter
Posts: 18
Joined: 17 Sep 2015 16:44
Status: Offline

Re: Dlink-DIR 825 link speed issue

#5

Post by sene4kin » 18 Sep 2015 11:38

Thx for the answer! I couldn't get multicast (IPTV) working properly on the openwrt(

User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2458
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Dlink-DIR 825 link speed issue

#6

Post by b0ssman » 18 Sep 2015 22:01

you could also get a proper gigabit switch. they are dirt cheap.
like a TP-Link TL-SG1005D
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.

Post Reply

Return to “Network switchs & routers”