*New 12.1 series Release:
2019-11-08: XigmaNAS 12.1.0.4.7091 - released!

*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

Weird issue, can´t mount disks? [SOLVED]

Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
pompelogpilt
Starter
Starter
Posts: 21
Joined: 01 Sep 2012 13:39
Status: Offline

Weird issue, can´t mount disks? [SOLVED]

#1

Post by pompelogpilt » 17 Feb 2013 20:58

Hi
Sorry for beeing a total noob about this, but after a reeboot, the disks are no longer accessibble! They aren´t mounted somehow? At least i cant access my pool anymore.. :-(

Havent done any changes to the setup or anything, it was just malfunctioning.

Any help will be deeply appreciated! :-)

So, i can see the disks in management, all disks are online.

Image
pic upload

In the Pools section, management, everything is unknown

Image
photo sharing sites

In Virtual Device i can see the pool, and seems to be connected with the disks

Image
free image hosting

And on the configuration page i can see the Pool and all the disks attached, but all info is unknown

Image
image ru

I have no clue what to do to access the files on the disk, its not any advanced pool, just one giant disk with samba set to share som folders in it. If anyone have experienced something like this, i havent found it, dont know exactly what to search for.. ;-)


Thanks for your time!
Kim
Last edited by pompelogpilt on 19 Feb 2013 21:11, edited 1 time in total.

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4978
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Weird issue, can´t mount disks?

#2

Post by raulfg3 » 17 Feb 2013 22:11

can you please config Nas4Fre to use english, and reload info?

post, Disks|ZFS|Pools|Information info and atach log in zip format.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

pompelogpilt
Starter
Starter
Posts: 21
Joined: 01 Sep 2012 13:39
Status: Offline

Re: Weird issue, can´t mount disks?

#3

Post by pompelogpilt » 17 Feb 2013 22:32

I'll do it as soon as I'm at the machine!

pompelogpilt
Starter
Starter
Posts: 21
Joined: 01 Sep 2012 13:39
Status: Offline

Re: Weird issue, can´t mount disks?

#4

Post by pompelogpilt » 17 Feb 2013 23:57

I´m guessing its the system log you meant?
Ive changed the language to english, sorry didnt think about that.. Thank you so much for your help!

Image

Image

Image

Image

Image

Image

Image

Image


photo sharing sites
You do not have the required permissions to view the files attached to this post.

randomparity
NewUser
NewUser
Posts: 4
Joined: 07 Feb 2013 18:55
Status: Offline

Re: Weird issue, can´t mount disks?

#5

Post by randomparity » 18 Feb 2013 07:12

Can you go to Disks|ZFS|Pools|Tools, run the history command, then post the results? I've had problems with the GUI not matching the actual system configuration and the "history" tool has been useful.

Dave

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4978
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Weird issue, can´t mount disks?

#6

Post by raulfg3 » 18 Feb 2013 09:08

detection of disk are correct:

Code: Select all

Feb 17 19:51:51 yggdrasil kernel: da0: <Imation Flash Drive 1.00> Removable Direct Access SCSI-2 device
Feb 17 19:51:51 yggdrasil kernel: da0: 40.000MB/s transfers
Feb 17 19:51:51 yggdrasil kernel: da0: 488MB (999424 512 byte sectors: 64H 32S/T 488C)
Feb 17 19:51:51 yggdrasil kernel: ada0: <ST2000DL003-9VT166 CC3C> ATA-8 SATA 3.x device
Feb 17 19:51:51 yggdrasil kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Feb 17 19:51:51 yggdrasil kernel: ada0: Command Queueing enabled
Feb 17 19:51:51 yggdrasil kernel: ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
Feb 17 19:51:51 yggdrasil kernel: ada0: Previously was known as ad4
Feb 17 19:51:51 yggdrasil kernel: ada1 at ahcich3 bus 0 scbus1 target 0 lun 0
Feb 17 19:51:51 yggdrasil kernel: ada1: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
Feb 17 19:51:51 yggdrasil kernel: ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Feb 17 19:51:51 yggdrasil kernel: ada1: Command Queueing enabled
Feb 17 19:51:51 yggdrasil kernel: ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
Feb 17 19:51:51 yggdrasil kernel: ada1: Previously was known as ad6
Feb 17 19:51:51 yggdrasil kernel: ada2 at ahcich4 bus 0 scbus2 target 0 lun 0
Feb 17 19:51:51 yggdrasil kernel: ada2: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
Feb 17 19:51:51 yggdrasil kernel: ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Feb 17 19:51:51 yggdrasil kernel: ada2: Command Queueing enabled
Feb 17 19:51:51 yggdrasil kernel: ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
Feb 17 19:51:51 yggdrasil kernel: ada2: Previously was known as ad8
Feb 17 19:51:51 yggdrasil kernel: ada3 at ahcich5 bus 0 scbus3 target 0 lun 0
Feb 17 19:51:51 yggdrasil kernel: ada3: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
Feb 17 19:51:51 yggdrasil kernel: ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Feb 17 19:51:51 yggdrasil kernel: ada3: Command Queueing enabled
Feb 17 19:51:51 yggdrasil kernel: ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
Feb 17 19:51:51 yggdrasil kernel: ada3: Previously was known as ad10
Feb 17 19:51:51 yggdrasil kernel: SMP: AP CPU #1 Launched!
Feb 17 19:51:51 yggdrasil kernel: SMP: AP CPU #2 Launched!
Feb 17 19:51:51 yggdrasil kernel: SMP: AP CPU #3 Launched!
Feb 17 19:51:51 yggdrasil kernel: Timecounter "TSC-low" frequency 12861679 Hz quality 1000
Feb 17 19:51:51 yggdrasil kernel: GEOM: da0: geometry does not match label (16h,63s != 64h,32s).
Feb 17 19:51:51 yggdrasil kernel: GEOM: da0: media size does not match label.
Feb 17 19:51:51 yggdrasil kernel: Trying to mount root from ufs:/dev/md0 []...

so problem is in the ZFS side of mount disk.

Please post zpool history to know it.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

pompelogpilt
Starter
Starter
Posts: 21
Joined: 01 Sep 2012 13:39
Status: Offline

Re: Weird issue, can´t mount disks?

#7

Post by pompelogpilt » 18 Feb 2013 10:19

Hi
When i try to run the history command from the GUI, it just says no pool available.
There is tree sections, Command, Option and Pool. Ive tryed the option "all" and "pool", but in either of them the last selection, Pool, is greyed out.

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4978
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Weird issue, can´t mount disks?

#8

Post by raulfg3 » 18 Feb 2013 14:48

is the same I see in the log.

Try zpool import and post what say, better if you do zpool import from shell

PD: Try to do dmesg -a from shell and post result ( is like your previous log, but more complete)
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

pompelogpilt
Starter
Starter
Posts: 21
Joined: 01 Sep 2012 13:39
Status: Offline

Re: Weird issue, can´t mount disks?

#9

Post by pompelogpilt » 18 Feb 2013 15:43

Here is the zpool import command:

Code: Select all

yggdrasil:~# zpool import
   pool: Pool
     id: 7328042942868730592
  state: ONLINE
 action: The pool can be imported using its name or numeric identifier.
 config:

	Pool        ONLINE
	  raidz1-0  ONLINE
	    ada3    ONLINE
	    ada2    ONLINE
	    ada1    ONLINE
	    ada0    ONLINE
And this is the dmesg -a:

Code: Select all

yggdrasil:~# dmesg -a
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0 r244224M: Fri Dec 14 19:53:48 JST 2012
    aoyama@nas4free.local:/usr/obj/nas4free/usr/src/sys/NAS4FREE-amd64 amd64
CPU: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz (3292.59-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a7  Family = 6  Model = 2a  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x1d9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 7906050048 (7539 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110527/psargs-392)
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110527/nsinit-380)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge desktop GT1 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe503000-0xfe5033ff irq 23 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 17 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 54:04:a6:b4:e5:36
pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci6: <ACPI PCI bus> on pcib6
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe400000-0xfe401fff irq 18 at device 0.0 on pci6
xhci0: 32 byte context size.
usbus1 on xhci0
pcib7: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci7: <ACPI PCI bus> on pcib7
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe502000-0xfe5023ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xfe501000-0xfe5017ff irq 20 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xc0000-0xcd7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to accept, logging disabled
iSCSI boot driver version 0.2.6
md0: Preloaded image </mfsroot> 230686720 bytes at 0xffffffff819a3c58
usbus0: 480Mbps High Speed USB v2.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <0x1033> at usbus1
uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: 4 ports with 4 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen2.3: <Imation> at usbus2
umass0: <Imation Flash Drive, class 0/0, rev 2.00/1.00, addr 3> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x4100
umass0:5:0:-1: Attached to scbus5
ada0 at ahcich2 bus 0 scbus0 target 0 lun 0
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Imation Flash Drive 1.00> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 488MB (999424 512 byte sectors: 64H 32S/T 488C)
ada0: <ST2000DL003-9VT166 CC3C> ATA-8 SATA 3.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich3 bus 0 scbus1 target 0 lun 0
ada1: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ahcich4 bus 0 scbus2 target 0 lun 0
ada2: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad8
ada3 at ahcich5 bus 0 scbus3 target 0 lun 0
ada3: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad10
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 12861698 Hz quality 1000
GEOM: da0: geometry does not match label (16h,63s != 64h,32s).
GEOM: da0: media size does not match label.
Trying to mount root from ufs:/dev/md0 []...
Loading configuration files.
Booting platform: embedded
Looking for configuration file: ada3 ada2 ada1 ada0 da0
Found configuration on device=/dev/da0a fstype=ufs.
Updating rc.conf:.....................................
Generating user database(s).
Starting GEOM devices.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
Starting file system checks:
hw.intr_storm_threshold: 1000 -> 9000
kern.coredump: 1 -> 0
kern.ipc.maxsockbuf: 2097152 -> 16777216
kern.ipc.nmbclusters: 25600 -> 262144
kern.ipc.nmbjumbo9: 6400 -> 131072
kern.ipc.nmbjumbo16: 3200 -> 65536
kern.ipc.nmbjumbop: 12800 -> 262144
kern.ipc.somaxconn: 128 -> 8192
kern.maxfilesperproc: 58982 -> 50000
net.inet.icmp.icmplim: 200 -> 300
net.inet.tcp.delayed_ack: 1 -> 0
net.inet.tcp.path_mtu_discovery: 1 -> 0
net.inet.tcp.recvbuf_inc: 16384 -> 262144
net.inet.tcp.recvbuf_max: 2097152 -> 4194304
net.inet.tcp.recvspace: 65536 -> 262144
net.inet.tcp.sendbuf_inc: 8192 -> 262144
net.inet.tcp.sendbuf_max: 2097152 -> 4194304
net.inet.tcp.sendspace: 32768 -> 262144
net.inet.udp.maxdgram: 9216 -> 57344
net.inet.udp.recvspace: 42080 -> 65536
net.local.stream.recvspace: 8192 -> 65536
net.local.stream.sendspace: 8192 -> 65536
security.jail.chflags_allowed: 0 -> 1
Mounting local file systems:.
Load NOP GEOM class
cannot import 'Pool': I/O error
	Recovery is possible, but will result in some data loss.
	Returning the pool to its state as of Sun Feb 17 16:16:14 2013
	should correct the problem.  Approximately 10 seconds of data
	must be discarded, irreversibly.  Recovery can be attempted
	by executing 'zpool import -F Pool'.  A scrub of the pool
	is strongly recommended after recovery.
Setting hostname: yggdrasil.local.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 
	inet 127.0.0.1 netmask 0xff000000 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
	ether 54:04:a6:b4:e5:36
	inet 10.0.0.99 netmask 0xffffff00 broadcast 10.0.0.255
	inet6 fe80::5604:a6ff:feb4:e536%re0 prefixlen 64 tentative scopeid 0x2 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	media: Ethernet autoselect (none)
	status: no carrier
Starting devd.
Updating hosts.
Generating host.conf.
Updating resolv.conf.
add net default: gateway 10.0.0.1
Additional routing options:.
Waiting for re0 to have link.
Waiting for 10.0.0.1 to respond to ICMP.
Creating clog files.
Starting syslogd.
Generating .websrv_htpasswd.
Preparing web-based file-management.
Starting transmission.
Starting afpd.
Initializing Acoustic/Standby/APM/UDMA on ATA disks: ada0 ada1 ada2 ada3 
Generating message of the day.
Removing stale Samba tdb files:  done
Load AIO module
Updating passdb.
Starting nmbd.
Starting smbd.
Configuring syscons: blanktime.
Starting sshd.
Starting cron.
Starting mdnsresponder.
Generating .htpasswd.
Starting lighttpd.
Setting hostuuid: 24a5eb20-5bcb-11d9-acfa-5404a6b4e536.
Setting hostid: 0x0b20f98f.
eval: /mnt/Pool/jail/conf/jail_start: not found
Starting background file system checks in 60 seconds.

Sun Feb 17 16:17:36 UTC 2013
Stopping lighttpd.
Waiting for PIDS: 2287.
Stopping cron.
Waiting for PIDS: 2156.
Stopping smbd.
Waiting for PIDS: 2075.
Stopping nmbd.
Waiting for PIDS: 2072, 2072.
Stopping afpd.
Waiting for PIDS: 1901.
Stopping transmission.
Waiting for PIDS: 1877.
Stopping devd.
Waiting for PIDS: 1547.
Writing entropy file:.
Stopping GEOM devices.
Terminated
.
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 done
All buffers synced.
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0 r244224M: Fri Dec 14 19:53:48 JST 2012
    aoyama@nas4free.local:/usr/obj/nas4free/usr/src/sys/NAS4FREE-amd64 amd64
CPU: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz (3292.60-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a7  Family = 6  Model = 2a  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x1d9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 7906050048 (7539 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110527/psargs-392)
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110527/nsinit-380)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge desktop GT1 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe503000-0xfe5033ff irq 23 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 17 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 54:04:a6:b4:e5:36
pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci6: <ACPI PCI bus> on pcib6
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe400000-0xfe401fff irq 18 at device 0.0 on pci6
xhci0: 32 byte context size.
usbus1 on xhci0
pcib7: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci7: <ACPI PCI bus> on pcib7
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe502000-0xfe5023ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xfe501000-0xfe5017ff irq 20 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xc0000-0xcd7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to accept, logging disabled
iSCSI boot driver version 0.2.6
md0: Preloaded image </mfsroot> 230686720 bytes at 0xffffffff819a3c58
usbus0: 480Mbps High Speed USB v2.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <0x1033> at usbus1
uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: 4 ports with 4 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen2.3: <Imation> at usbus2
umass0: <Imation Flash Drive, class 0/0, rev 2.00/1.00, addr 3> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x4100
umass0:5:0:-1: Attached to scbus5
ada0 at ahcich2 bus 0 scbus0 target 0 lun 0
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Imation Flash Drive 1.00> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 488MB (999424 512 byte sectors: 64H 32S/T 488C)
ada0: <ST2000DL003-9VT166 CC3C> ATA-8 SATA 3.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich3 bus 0 scbus1 target 0 lun 0
ada1: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ahcich4 bus 0 scbus2 target 0 lun 0
ada2: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad8
ada3 at ahcich5 bus 0 scbus3 target 0 lun 0
ada3: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad10
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 12861700 Hz quality 1000
GEOM: da0: geometry does not match label (16h,63s != 64h,32s).
GEOM: da0: media size does not match label.
Trying to mount root from ufs:/dev/md0 []...
Loading configuration files.
Booting platform: embedded
Looking for configuration file: ada3 ada2 ada1 ada0 da0
Found configuration on device=/dev/da0a fstype=ufs.
Updating rc.conf:.....................................
Generating user database(s).
Starting GEOM devices.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
Starting file system checks:
hw.intr_storm_threshold: 1000 -> 9000
kern.coredump: 1 -> 0
kern.ipc.maxsockbuf: 2097152 -> 16777216
kern.ipc.nmbclusters: 25600 -> 262144
kern.ipc.nmbjumbo9: 6400 -> 131072
kern.ipc.nmbjumbo16: 3200 -> 65536
kern.ipc.nmbjumbop: 12800 -> 262144
kern.ipc.somaxconn: 128 -> 8192
kern.maxfilesperproc: 58982 -> 50000
net.inet.icmp.icmplim: 200 -> 300
net.inet.tcp.delayed_ack: 1 -> 0
net.inet.tcp.path_mtu_discovery: 1 -> 0
net.inet.tcp.recvbuf_inc: 16384 -> 262144
net.inet.tcp.recvbuf_max: 2097152 -> 4194304
net.inet.tcp.recvspace: 65536 -> 262144
net.inet.tcp.sendbuf_inc: 8192 -> 262144
net.inet.tcp.sendbuf_max: 2097152 -> 4194304
net.inet.tcp.sendspace: 32768 -> 262144
net.inet.udp.maxdgram: 9216 -> 57344
net.inet.udp.recvspace: 42080 -> 65536
net.local.stream.recvspace: 8192 -> 65536
net.local.stream.sendspace: 8192 -> 65536
security.jail.chflags_allowed: 0 -> 1
Mounting local file systems:.
Load NOP GEOM class
cannot import 'Pool': I/O error
	Recovery is possible, but will result in some data loss.
	Returning the pool to its state as of Sun Feb 17 16:16:14 2013
	should correct the problem.  Approximately 10 seconds of data
	must be discarded, irreversibly.  Recovery can be attempted
	by executing 'zpool import -F Pool'.  A scrub of the pool
	is strongly recommended after recovery.
Setting hostname: yggdrasil.local.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 
	inet 127.0.0.1 netmask 0xff000000 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
	ether 54:04:a6:b4:e5:36
	inet 10.0.0.99 netmask 0xffffff00 broadcast 10.0.0.255
	inet6 fe80::5604:a6ff:feb4:e536%re0 prefixlen 64 tentative scopeid 0x2 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	media: Ethernet autoselect (none)
	status: no carrier
Starting devd.
Updating hosts.
Generating host.conf.
Updating resolv.conf.
add net default: gateway 10.0.0.1
Additional routing options:.
Waiting for re0 to have link.
Waiting for 10.0.0.1 to respond to ICMP.
Creating clog files.
Starting syslogd.
Generating .websrv_htpasswd.
Preparing web-based file-management.
Starting transmission.
Starting afpd.
Initializing Acoustic/Standby/APM/UDMA on ATA disks: ada0 ada1 ada2 ada3 
Generating message of the day.
Removing stale Samba tdb files:  done
Load AIO module
Updating passdb.
Starting nmbd.
Starting smbd.
Configuring syscons: blanktime.
Starting sshd.
Starting cron.
Starting mdnsresponder.
Generating .htpasswd.
Starting lighttpd.
Setting hostuuid: 24a5eb20-5bcb-11d9-acfa-5404a6b4e536.
Setting hostid: 0x0b20f98f.
eval: /mnt/Pool/jail/conf/jail_start: not found
Starting background file system checks in 60 seconds.

Sun Feb 17 19:36:51 UTC 2013
Stopping lighttpd.
Waiting for PIDS: 2287.
Stopping cron.
Stopping smbd.
Waiting for PIDS: 2075.
Stopping nmbd.
Waiting for PIDS: 2072, 2072.
Stopping afpd.
Waiting for PIDS: 1901.
Stopping transmission.
Waiting for PIDS: 1877.
Stopping devd.
Waiting for PIDS: 1547.
Writing entropy file:.
Stopping GEOM devices.
Terminated
.
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 done
All buffers synced.
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0 r244224M: Fri Dec 14 19:53:48 JST 2012
    aoyama@nas4free.local:/usr/obj/nas4free/usr/src/sys/NAS4FREE-amd64 amd64
CPU: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz (3292.59-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a7  Family = 6  Model = 2a  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x1d9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 7906050048 (7539 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110527/psargs-392)
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110527/nsinit-380)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge desktop GT1 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe503000-0xfe5033ff irq 23 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 17 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 54:04:a6:b4:e5:36
pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci6: <ACPI PCI bus> on pcib6
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe400000-0xfe401fff irq 18 at device 0.0 on pci6
xhci0: 32 byte context size.
usbus1 on xhci0
pcib7: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci7: <ACPI PCI bus> on pcib7
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe502000-0xfe5023ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xfe501000-0xfe5017ff irq 20 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xc0000-0xcd7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to accept, logging disabled
iSCSI boot driver version 0.2.6
md0: Preloaded image </mfsroot> 230686720 bytes at 0xffffffff819a3c58
usbus0: 480Mbps High Speed USB v2.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <0x1033> at usbus1
uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: 4 ports with 4 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen2.3: <Imation> at usbus2
umass0: <Imation Flash Drive, class 0/0, rev 2.00/1.00, addr 3> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x4100
umass0:5:0:-1: Attached to scbus5
ada0 at ahcich2 bus 0 scbus0 target 0 lun 0
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Imation Flash Drive 1.00> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 488MB (999424 512 byte sectors: 64H 32S/T 488C)
ada0: <ST2000DL003-9VT166 CC3C> ATA-8 SATA 3.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich3 bus 0 scbus1 target 0 lun 0
ada1: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ahcich4 bus 0 scbus2 target 0 lun 0
ada2: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad8
ada3 at ahcich5 bus 0 scbus3 target 0 lun 0
ada3: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad10
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 12861679 Hz quality 1000
GEOM: da0: geometry does not match label (16h,63s != 64h,32s).
GEOM: da0: media size does not match label.
Trying to mount root from ufs:/dev/md0 []...
Loading configuration files.
Booting platform: embedded
Looking for configuration file: ada3 ada2 ada1 ada0 da0
Found configuration on device=/dev/da0a fstype=ufs.
Updating rc.conf:.....................................
Generating user database(s).
Starting GEOM devices.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
Starting file system checks:
hw.intr_storm_threshold: 1000 -> 9000
kern.coredump: 1 -> 0
kern.ipc.maxsockbuf: 2097152 -> 16777216
kern.ipc.nmbclusters: 25600 -> 262144
kern.ipc.nmbjumbo9: 6400 -> 131072
kern.ipc.nmbjumbo16: 3200 -> 65536
kern.ipc.nmbjumbop: 12800 -> 262144
kern.ipc.somaxconn: 128 -> 8192
kern.maxfilesperproc: 58982 -> 50000
net.inet.icmp.icmplim: 200 -> 300
net.inet.tcp.delayed_ack: 1 -> 0
net.inet.tcp.path_mtu_discovery: 1 -> 0
net.inet.tcp.recvbuf_inc: 16384 -> 262144
net.inet.tcp.recvbuf_max: 2097152 -> 4194304
net.inet.tcp.recvspace: 65536 -> 262144
net.inet.tcp.sendbuf_inc: 8192 -> 262144
net.inet.tcp.sendbuf_max: 2097152 -> 4194304
net.inet.tcp.sendspace: 32768 -> 262144
net.inet.udp.maxdgram: 9216 -> 57344
net.inet.udp.recvspace: 42080 -> 65536
net.local.stream.recvspace: 8192 -> 65536
net.local.stream.sendspace: 8192 -> 65536
security.jail.chflags_allowed: 0 -> 1
Mounting local file systems:.
Load NOP GEOM class
cannot import 'Pool': I/O error
	Recovery is possible, but will result in some data loss.
	Returning the pool to its state as of Sun Feb 17 16:16:14 2013
	should correct the problem.  Approximately 10 seconds of data
	must be discarded, irreversibly.  Recovery can be attempted
	by executing 'zpool import -F Pool'.  A scrub of the pool
	is strongly recommended after recovery.
Setting hostname: yggdrasil.local.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 
	inet 127.0.0.1 netmask 0xff000000 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
	ether 54:04:a6:b4:e5:36
	inet 10.0.0.99 netmask 0xffffff00 broadcast 10.0.0.255
	inet6 fe80::5604:a6ff:feb4:e536%re0 prefixlen 64 tentative scopeid 0x2 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	media: Ethernet autoselect (none)
	status: no carrier
Starting devd.
Updating hosts.
Generating host.conf.
Updating resolv.conf.
add net default: gateway 10.0.0.1
Additional routing options:.
Waiting for re0 to have link.
Waiting for 10.0.0.1 to respond to ICMP.
Creating clog files.
Starting syslogd.
Generating .websrv_htpasswd.
Preparing web-based file-management.
Starting transmission.
Starting afpd.
Initializing Acoustic/Standby/APM/UDMA on ATA disks: ada0 ada1 ada2 ada3 
Generating message of the day.
Removing stale Samba tdb files:  done
Load AIO module
Updating passdb.
Starting nmbd.
Starting smbd.
Configuring syscons: blanktime.
Starting sshd.
Starting cron.
Starting mdnsresponder.
Generating .htpasswd.
Starting lighttpd.
Setting hostuuid: 24a5eb20-5bcb-11d9-acfa-5404a6b4e536.
Setting hostid: 0x0b20f98f.
eval: /mnt/Pool/jail/conf/jail_start: not found
Starting background file system checks in 60 seconds.


pompelogpilt
Starter
Starter
Posts: 21
Joined: 01 Sep 2012 13:39
Status: Offline

Re: Weird issue, can´t mount disks?

#10

Post by pompelogpilt » 18 Feb 2013 15:48

I see there is something about the pool import, and that i have to do a ´zpool import -F´ and then do a scrub? How is that done?
A little loss of data is no biggie, as long as most of it is there ;)

Oh, and what could have caused this?

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4978
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Weird issue, can´t mount disks?

#11

Post by raulfg3 » 18 Feb 2013 16:08

if this are correct:

Code: Select all

yggdrasil:~# zpool import
   pool: Pool
     id: 7328042942868730592
  state: ONLINE
 action: The pool can be imported using its name or numeric identifier.
 config:

   Pool        ONLINE
     raidz1-0  ONLINE
       ada3    ONLINE
       ada2    ONLINE
       ada1    ONLINE
       ada0    ONLINE
your pool are now online, can you see in webgui?.

if yes you need to syncrhonize in: Disks|ZFS|Configuration|Synchronize

if not, you can force import using -f

Code: Select all

zpool import -f 7328042942868730592
PD: not sure, perhaps is :

Code: Select all

zpool -f import 7328042942868730592
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

pompelogpilt
Starter
Starter
Posts: 21
Joined: 01 Sep 2012 13:39
Status: Offline

Re: Weird issue, can´t mount disks?

#12

Post by pompelogpilt » 18 Feb 2013 16:40

Hi
In the webgui it is the same as in the previous images uploaded, no change there yet.
This is what happened with the force import:

Code: Select all

yggdrasil:~# zpool import -f 7328042942868730592
cannot import 'Pool': I/O error
	Recovery is possible, but will result in some data loss.
	Returning the pool to its state as of Sun Feb 17 16:16:14 2013
	should correct the problem.  Approximately 10 seconds of data
	must be discarded, irreversibly.  Recovery can be attempted
	by executing 'zpool import -F Pool'.  A scrub of the pool
	is strongly recommended after recovery.
yggdrasil:~# zpool import -F Pool
cannot import 'Pool': pool may be in use from other system
use '-f' to import anyway

pompelogpilt
Starter
Starter
Posts: 21
Joined: 01 Sep 2012 13:39
Status: Offline

Re: Weird issue, can´t mount disks?

#13

Post by pompelogpilt » 19 Feb 2013 20:40

No more insight to this issue? Guess i have to consider the data as lost?
Or could a fresh install with import then maybe fix the issue?

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4978
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Weird issue, can´t mount disks?

#14

Post by raulfg3 » 19 Feb 2013 20:48

if you only lose 10 seconds, no much data is lost, try to do what zfs say.
zpool import - F 7328042942868730592

or

zpool import -F Pool

see: http://docs.oracle.com/cd/E19253-01/819 ... index.html
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

pompelogpilt
Starter
Starter
Posts: 21
Joined: 01 Sep 2012 13:39
Status: Offline

Re: Weird issue, can´t mount disks?

#15

Post by pompelogpilt » 19 Feb 2013 20:56

Hi
Ive tried that, but it doesnt work, se the code 3 posts above. It says there is an I/O error, when trying to zpool import -F it says Pool may in use from other system?

It just ends up looping around and not actually importing the pool.

pompelogpilt
Starter
Starter
Posts: 21
Joined: 01 Sep 2012 13:39
Status: Offline

Re: Weird issue, can´t mount disks?

#16

Post by pompelogpilt » 19 Feb 2013 21:09

Oh wow!
It wasn´t too obvious to me, but i tried this:

Code: Select all

Welcome to NAS4Free!
yggdrasil:~# zpool status
no pools available
yggdrasil:~# zpool import -F Pool
cannot import 'Pool': pool may be in use from other system
use '-f' to import anyway
yggdrasil:~# zpool import -f Pool
cannot import 'Pool': I/O error
	Recovery is possible, but will result in some data loss.
	Returning the pool to its state as of Sun Feb 17 16:16:14 2013
	should correct the problem.  Approximately 10 seconds of data
	must be discarded, irreversibly.  Recovery can be attempted
	by executing 'zpool import -F Pool'.  A scrub of the pool
	is strongly recommended after recovery.
yggdrasil:~# zpool import -F Pool
cannot import 'Pool': pool may be in use from other system
use '-f' to import anyway
yggdrasil:~# zpool import -F -f  Pool
Pool Pool returned to its state as of Sun Feb 17 16:16:14 2013.
Discarded approximately 10 seconds of transactions.
yggdrasil:~# 
And now i have access! I didnt realise i was supposed to stack those triggers, sorry for being a total noob.. Great help with this, thank you so much for your time and all advices! :D

Post Reply

Return to “ZFS (only!)”