*New 11.3 series Release:
2019-10-05: XigmaNAS 11.3.0.4.6928 - released, 11.2 series are soon unsupported!

*New 12.0 series Release:
2019-10-05: XigmaNAS 12.0.0.4.6928 - released!

*New 11.2 series Release:
2019-09-23: XigmaNAS 11.2.0.4.6881 - released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

[EXTENSION] Extended GUI

XigmaNAS Extensions / Add-ons

Moderator: crest

Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
bgold
Starter
Starter
Posts: 59
Joined: 23 May 2015 08:42
Status: Offline

Re: [EXTENSION] Extended GUI

#631

Post by bgold » 30 Apr 2019 16:25

crest wrote:
30 Apr 2019 08:45
Hello bgold,
bgold wrote:
29 Apr 2019 21:36
Is there any chance of adding alarms for SSD life? Similar to the diskspace.

Thanks
Yes, can be done. Since the lifetime values are wide spread how the different vendors implemented in SMART it would be helpful to send me the whole SMART output of your SSDs.

Regards
crest
Here you go and thanks
You do not have the required permissions to view the files attached to this post.
XigmaNAS 12.0.0.4.6625
HP ML150 Gen9, Dual 2.4ghz, 256gb, 25TB Storage, 3-ZFS pools w/SSD cache&logs, SSD boot/data, SFP+

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#632

Post by crest » 04 May 2019 18:59

bgold wrote:
30 Apr 2019 16:25
crest wrote:
30 Apr 2019 08:45
Hello bgold,
bgold wrote:
29 Apr 2019 21:36
Is there any chance of adding alarms for SSD life? Similar to the diskspace.

Thanks
Yes, can be done. Since the lifetime values are wide spread how the different vendors implemented in SMART it would be helpful to send me the whole SMART output of your SSDs.

Regards
crest
Here you go and thanks
Thanks for sending the SMART values, pls be patient, will take some days for me to start again to work on the extension ;)
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

doktornotor
Advanced User
Advanced User
Posts: 182
Joined: 16 May 2017 00:22
Status: Offline

Re: [EXTENSION] Extended GUI

#633

Post by doktornotor » 05 May 2019 10:27

crest wrote:
04 May 2019 18:59
Thanks for sending the SMART values, pls be patient, will take some days for me to start again to work on the extension ;)
While this is being worked on... any chance to fix this glitch? Not sure where's the -518% coming from, but it's unwanted. :)
EGUI_SSD.png
You do not have the required permissions to view the files attached to this post.

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#634

Post by crest » 05 May 2019 11:30

Sure, will take this also ...
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

User avatar
gomario
Starter
Starter
Posts: 73
Joined: 17 Dec 2016 08:45
Status: Offline

Re: [EXTENSION] Extended GUI

#635

Post by gomario » 17 May 2019 19:28

Extended GUI can not make sense of ZFS formated drives without partitions! It expects to see at least one partition (P1), otherwise it completely ignores the drives above the non partitioned drive (even if those drives do have partitions) and while it does display the non partition drive, it can't understand what is going on and shows nonsense. Anyone else observed this anomaly? And is there a way to fix the issue without formating (and manualy partitioning) the drive in question? I don't feel like resilvering the drive just because Extended GUI has an issue.
Second Pic.jpg
First Pic.jpg
You do not have the required permissions to view the files attached to this post.

bjs
Starter
Starter
Posts: 23
Joined: 08 Mar 2019 12:58
Location: Virginia, USA
Status: Offline

Re: [EXTENSION] Extended GUI

#636

Post by bjs » 19 May 2019 23:59

I am also seeing some strange results in my Disk Space Usage Panel...

Disk Space Panel.JPG

bootpool is made up of ada0s1 and ada1s1 in a mirror vdev... zpool is made up of ada0s3 and ada1s3 also in a mirror vdev... ada0 and ada1 are HP M700 120G SSD's with a full RootOnZFS/MBR install... I would expect to see ada0 and ada1 listed for both similar to my storage pools (da0 and da1, da2 and da3, etc)...

Don't know if it's related, but shouldn't there be a green checkmark, there seems to be plenty of available space???

I can also send you the smart data for the HP M700 if you would like it as well...

Regards,
Ben
You do not have the required permissions to view the files attached to this post.
XigmaNAS 11.2.0.4 - Omnius RootOnZFS/MBR - HP M700 120GB SSDs
x64-full on Intel Core2 Quad CPU Q9300 @ 2.50GHz - 8GB RAM
Intel DG33FB Motherboard - LSI 9211-8i with 8TB available

User avatar
gomario
Starter
Starter
Posts: 73
Joined: 17 Dec 2016 08:45
Status: Offline

Re: [EXTENSION] Extended GUI

#637

Post by gomario » 22 May 2019 13:54

Ok, in my case it turned out to be a easy fix I merely had to synchronize the underlying XigmaNAS OS (BSD) with the GUI. All shows OK now
I suggest you try the same thing.

Sent from my MI 5s Plus using Tapatalk


User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#638

Post by crest » 23 May 2019 08:55

Hello bjs,
bjs wrote:
19 May 2019 23:59
I am also seeing some strange results in my Disk Space Usage Panel...
...
bootpool is made up of ada0s1 and ada1s1 in a mirror vdev... zpool is made up of ada0s3 and ada1s3 also in a mirror vdev... ada0 and ada1 are HP M700 120G SSD's with a full RootOnZFS/MBR install... I would expect to see ada0 and ada1 listed for both similar to my storage pools (da0 and da1, da2 and da3, etc)...
Pls try, as gomario already recommended, to synchronize the pools, should solve your issues too.

Don't know if it's related, but shouldn't there be a green checkmark, there seems to be plenty of available space???
At the moment the space check is not yet implemented for zroot but I'll do this for the next release of eGUI.

I can also send you the smart data for the HP M700 if you would like it as well...
Yes, please, would be helpful ... !

Best regards
crest
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

bjs
Starter
Starter
Posts: 23
Joined: 08 Mar 2019 12:58
Location: Virginia, USA
Status: Offline

Re: [EXTENSION] Extended GUI

#639

Post by bjs » 01 Jun 2019 15:57

Well it's obvious, to me at least, that I don't know what I'm doing... I have tried synchronizing the pools and every time I do I wind up with 4 disks that need to be deleted under Disk Management and the home page doesn't change from what I posted above... Also, the check mark I was referring to was for the top pool named Backup... I'm also wondering if the bootpool and zpool aren't detected properly because this is a MBR install... Whatever, I'm afraid the only way to fix it maybe a complete reinstall...

Anyway, here is the smart details on my HP M700 SSDs...
You do not have the required permissions to view the files attached to this post.
XigmaNAS 11.2.0.4 - Omnius RootOnZFS/MBR - HP M700 120GB SSDs
x64-full on Intel Core2 Quad CPU Q9300 @ 2.50GHz - 8GB RAM
Intel DG33FB Motherboard - LSI 9211-8i with 8TB available

User avatar
JoseMR
Hardware & Software Guru
Hardware & Software Guru
Posts: 1150
Joined: 16 Apr 2014 04:15
Location: PR
Contact:
Status: Offline

Re: [EXTENSION] Extended GUI

#640

Post by JoseMR » 01 Jun 2019 17:23

bjs wrote:
01 Jun 2019 15:57
Well it's obvious, to me at least, that I don't know what I'm doing... I have tried synchronizing the pools and every time I do I wind up with 4 disks that need to be deleted under Disk Management and the home page doesn't change from what I posted above... Also, the check mark I was referring to was for the top pool named Backup... I'm also wondering if the bootpool and zpool aren't detected properly because this is a MBR install... Whatever, I'm afraid the only way to fix it maybe a complete reinstall...

Anyway, here is the smart details on my HP M700 SSDs...
Hi bjs, in RootOnZFS/MBR installations the bootpool(ada0s1a) and zroot(ada0s1d) while they independent ZFS pools, they reside in the same disk but in different slices as required for MBR.

I guess that eGUI smartctl command is calling for either "/dev/adaXs1" or "/dev/adaXs1X" and not omitting the slice part(s1X) then returning nothing, but I can't confirm this from a VM unfortunately, but I will let crest know if I find solution.

Regards
System: FreeBSD 12 RootOnZFS, MB: Supermicro X8SI6-F, Xeon X3450, 16GB DDR3 ECC RDIMMs.
Addons at GitHub
JoseMRPubServ
Boot Environments Intro

sleyk2010
Starter
Starter
Posts: 21
Joined: 22 Nov 2018 03:30
Status: Offline

Re: [EXTENSION] Extended GUI

#641

Post by sleyk2010 » 18 Jul 2019 16:05

Hello,

I apologize greatly if this is already fixed, but I haven't been able to find a solution,

I install OneButton and install only Extended-Gui for now.

Everything works great, and I see all drives, along with temps and everything looks good. The issue occurs when I reboot.

The extension pages for both the OneButton and Extended-Gui disappear. When I look at File Manager, I see all folders as initially installed, but for some reason, tab in Web Gui is not persistent upon reboot.

I then have to go ahead and reinstall OneButton to see the extension page again in the Web Gui.

Is there any fix for this? Every time I reboot, I lose the extension page and have to reinstall all over again. I am currently on 12.0.0.4 6766 Embedded. This is a fresh install.

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4918
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: [EXTENSION] Extended GUI

#642

Post by raulfg3 » 18 Jul 2019 17:11

revise option in webGUI to do not load extensions = "Disable extensions Menu"
1.jpg
You do not have the required permissions to view the files attached to this post.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

sleyk2010
Starter
Starter
Posts: 21
Joined: 22 Nov 2018 03:30
Status: Offline

Re: [EXTENSION] Extended GUI

#643

Post by sleyk2010 » 22 Jul 2019 16:35

Hi Raulfg,

Thanks for giving me this suggestion. You always are available and help out. Thanks so much!

Sadly, this did not work, I reinstalled and it showed the extensions menu, but when I enabled this toggle, it actually made the extensions tab disappear again :shock:

But thank you my friend, I have thought of something that might work. I will post back shortly.

sleyk2010
Starter
Starter
Posts: 21
Joined: 22 Nov 2018 03:30
Status: Offline

Re: [EXTENSION] Extended GUI

#644

Post by sleyk2010 » 22 Jul 2019 16:40

@raulfg3: Ok I got this to finally work. Now my extensions tab is persistent on reboot.

I had to go and reorder the list of command scripts in my command scripts page under System > advanced.

It was weird, I had some command scripts running postinit, and it seems to somehow get higher on the list than the command script to start Onebutton and Extended-Gui.

I went ahead and reordered the command scripts so that OneButton and Extended-Gui load first, then I made sure my other command scripts were lower in the proper place for postinit and shutdown.

This fixed it and now the extension page is there after every reboot.

So if anyone gets this problem, just check your command scripts list and make sure OneButton and any other extension is high on the priority list to load first as a Postinit, then place any other command scripts lower.

Thanks for this, as I would not have tried this without your initial suggestion.

Appreciate your help my friend!

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#645

Post by crest » 24 Jul 2019 09:19

sleyk2010 wrote:
22 Jul 2019 16:40
@raulfg3: Ok I got this to finally work. Now my extensions tab is persistent on reboot.

I had to go and reorder the list of command scripts in my command scripts page under System > advanced.

It was weird, I had some command scripts running postinit, and it seems to somehow get higher on the list than the command script to start Onebutton and Extended-Gui.

I went ahead and reordered the command scripts so that OneButton and Extended-Gui load first, then I made sure my other command scripts were lower in the proper place for postinit and shutdown.

This fixed it and now the extension page is there after every reboot.

So if anyone gets this problem, just check your command scripts list and make sure OneButton and any other extension is high on the priority list to load first as a Postinit, then place any other command scripts lower.

Thanks for this, as I would not have tried this without your initial suggestion.

Appreciate your help my friend!
Just out of curiosity, can you show the scripts that blocked somehow the extension scripts - under normal circumstances they should run anyway but maybe delayed...

Regards
crest
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

birnbacs
Starter
Starter
Posts: 22
Joined: 04 Oct 2018 19:04
Status: Offline

Re: purging eGUI alarms

#646

Post by birnbacs » 15 Sep 2019 11:23

I am wondering how to make messages on the "status" screen disappear. The attachment shows one of my systems with alert reaching back as far as 10 months.

I tried emptying the logs (Diagnostics->Log->Notifications et al.) but to no effect. I was hoping there to be a eGUI function but could not find one. I also tried to empty out the eGUI log (extended-gui/log/notifications.log) in a terminal but its contents keep popping back up out of nowhere. I tried a few combinations, including with disabled eGUI and with also unlinking log files unter /tmp.

So how do you empty the system alerts indeed?

As a probably related thing: I playfully enabled acustic alarms and one went off right away. Unfortunately I could not find the kill (or snooze) function. I finally found myself rebooting the server with disabled eGUI to get rid of it. What would have been the appropriate way to silence an alarm?

Kind regards

Sebastian
You do not have the required permissions to view the files attached to this post.

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: purging eGUI alarms

#647

Post by crest » 15 Sep 2019 12:27

Hello birnbacs,
birnbacs wrote:
15 Sep 2019 11:23
I am wondering how to make messages on the "status" screen disappear. The attachment shows one of my systems with alert reaching back as far as 10 months.

I tried emptying the logs (Diagnostics->Log->Notifications et al.) but to no effect. I was hoping there to be a eGUI function but could not find one. I also tried to empty out the eGUI log (extended-gui/log/notifications.log) in a terminal but its contents keep popping back up out of nowhere. I tried a few combinations, including with disabled eGUI and with also unlinking log files unter /tmp.

So how do you empty the system alerts indeed?

As a probably related thing: I playfully enabled acustic alarms and one went off right away. Unfortunately I could not find the kill (or snooze) function. I finally found myself rebooting the server with disabled eGUI to get rid of it. What would have been the appropriate way to silence an alarm?

Kind regards

Sebastian
Very easy to get rid of these messages (they stay in an extra file not in logs), on Status > System proceed to the bottom of the page, there you will find the buttons Mute Alarms (audible) and Clear History (alarm messages on top of the page).

Regards
crest
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

birnbacs
Starter
Starter
Posts: 22
Joined: 04 Oct 2018 19:04
Status: Offline

Re: [EXTENSION] Extended GUI

#648

Post by birnbacs » 15 Sep 2019 16:39

Aaaaahh! :-) Thanks a ton for that

User avatar
zoon01
Developer
Developer
Posts: 766
Joined: 20 Jun 2012 21:06
Location: Netherlands
Contact:
Status: Offline

Re: [EXTENSION] Extended GUI

#649

Post by zoon01 » 20 Sep 2019 02:15

We have broken Extended GUI on release 11.2.0.4.6862 and soon 12 series!
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.84 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz

Development system is same system in virtualbox.

birnbacs
Starter
Starter
Posts: 22
Joined: 04 Oct 2018 19:04
Status: Offline

Re: [EXTENSION] Extended GUI

#650

Post by birnbacs » 20 Sep 2019 08:18

Er...
"broken" in the meaning of "no longer working"?

iva2019
NewUser
NewUser
Posts: 9
Joined: 03 Aug 2014 16:27
Location: Russia
Status: Offline

Re: [EXTENSION] Extended GUI

#651

Post by iva2019 » 26 Sep 2019 20:45

Hello.
After updating the XigmaNAS to version 12.0.0.4.6881, I receive this message

Fatal error: Cannot redeclare get_upsinfo() (previously declared in /usr/local/www/index.php:145) in /etc/inc/system.inc on line 802

How to correct it?
NAS1: 12.0.0.4 - Reticulus (revision 6881) x64-embedded Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz 8192MiB RAM
UPS: APC Smart-UPS 1000
Extensions: Plex, TheBrig, OneButtonInstaller, Extended GUI

User avatar
jerryone
Starter
Starter
Posts: 59
Joined: 22 Sep 2017 21:45
Location: Timisoara
Contact:
Status: Offline

Re: [EXTENSION] Extended GUI

#652

Post by jerryone » 26 Sep 2019 20:50

iva2019 wrote:
26 Sep 2019 20:45
Hello.
After updating the XigmaNAS to version 12.0.0.4.6881, I receive this message

Fatal error: Cannot redeclare get_upsinfo() (previously declared in /usr/local/www/index.php:145) in /etc/inc/system.inc on line 802

How to correct it?
Hi, you need to access other page not home page! After that go to extension disable extended gui, refresh your browser tray to access home page again! Will work if you don't have other page in your browser history look in the first threads with this problem and you will find a similar adress that i have already provided ! Good luck 😉
Dell T610 Xeon x5650 x2 , 192 GB DELL ECC, HBA 9211-8i LSI x2 , 7xHGST-4TB, 2xSamsung 1TB, , 1xKingston 128GB-SSD boot sys
CIFS/SMB, Syncthing, DLNA/UPnP MiniDLNA, BitTorrent, Plex Media Server

iva2019
NewUser
NewUser
Posts: 9
Joined: 03 Aug 2014 16:27
Location: Russia
Status: Offline

Re: [EXTENSION] Extended GUI

#653

Post by iva2019 » 26 Sep 2019 21:10

I can return access to the standard home page. I meant the extended page is not displayed. Or about it and wrote zoon01
"We have broken Extended GUI on release 11.2.0.4.6862 and soon 12 series!" ?
NAS1: 12.0.0.4 - Reticulus (revision 6881) x64-embedded Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz 8192MiB RAM
UPS: APC Smart-UPS 1000
Extensions: Plex, TheBrig, OneButtonInstaller, Extended GUI

User avatar
jerryone
Starter
Starter
Posts: 59
Joined: 22 Sep 2017 21:45
Location: Timisoara
Contact:
Status: Offline

Re: [EXTENSION] Extended GUI

#654

Post by jerryone » 26 Sep 2019 21:35

iva2019 wrote:
26 Sep 2019 21:10
I can return access to the standard home page. I meant the extended page is not displayed. Or about it and wrote zoon01
"We have broken Extended GUI on release 11.2.0.4.6862 and soon 12 series!" ?
192.168.1.250:XXXX/interfaces_assign.php : write this in local network from there go to eXTENSIONS AND DESABLE eXTENDED gui EASY !!!! rEFRESH BROWSER . mODIFIE ANY PORT IF YOU HAVE OR YOUR IP ADDRESS
Dell T610 Xeon x5650 x2 , 192 GB DELL ECC, HBA 9211-8i LSI x2 , 7xHGST-4TB, 2xSamsung 1TB, , 1xKingston 128GB-SSD boot sys
CIFS/SMB, Syncthing, DLNA/UPnP MiniDLNA, BitTorrent, Plex Media Server

iva2019
NewUser
NewUser
Posts: 9
Joined: 03 Aug 2014 16:27
Location: Russia
Status: Offline

Re: [EXTENSION] Extended GUI

#655

Post by iva2019 » 26 Sep 2019 21:48

It 's hard to communicate through an interpreter.
I ask "Extended GUI in version 12 until no works?"
NAS1: 12.0.0.4 - Reticulus (revision 6881) x64-embedded Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz 8192MiB RAM
UPS: APC Smart-UPS 1000
Extensions: Plex, TheBrig, OneButtonInstaller, Extended GUI

jimmyhendrix
NewUser
NewUser
Posts: 11
Joined: 08 Jun 2018 20:11
Status: Offline

Re: [EXTENSION] Extended GUI

#656

Post by jimmyhendrix » 06 Oct 2019 14:21

Is there an ETA for a fix to run Extended GUI with XigmaNAS builds greather than 6766?

Post Reply

Return to “Extensions / Add-ons”