*New 12.1 series Release:
2019-11-08: XigmaNAS 12.1.0.4.7091 - released!

*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

[EXTENSION] Extended GUI

XigmaNAS Extensions / Add-ons

Moderator: crest

Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#301

Post by crest » 30 Nov 2015 11:45

ChriZathens wrote:No,no don't bother.
I reverted back to 0.5b1 and I will proceed with installing the latest 9.3.0.2 and see how it goes.
If the latest 9.3.0.2 does not include the function, then I will install version 10 in the following days.
Thanks a lot!!!
You're always welcome ... :D ;)
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

dima9751
NewUser
NewUser
Posts: 5
Joined: 24 Dec 2014 17:30
Status: Offline

Re: [EXTENSION] Extended GUI

#302

Post by dima9751 » 30 Nov 2015 11:53

ChriZathens wrote:Hi Crest!
Just installed 0.5.1.1 on one of my systems (9.3.0.2 - Nayla revision 1310) and in status|system I get

Code: Select all

Fatal error: Call to undefined function html_textinfo() in /usr/local/www/index.php on line 640
I get the same on NAS4Free 9.3.0.2 (1955).
I am not ready to upgrade to 10 right now.

So if it possible make it work again on NAS4Free 9.3.0.2 (1955).

Thanks.

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#303

Post by crest » 30 Nov 2015 12:33

dima9751 wrote: I get the same on NAS4Free 9.3.0.2 (1955).
I am not ready to upgrade to 10 right now.

So if it possible make it work again on NAS4Free 9.3.0.2 (1955).
Ok, I will take care about this ...
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

User avatar
ChriZathens
Forum Moderator
Forum Moderator
Posts: 833
Joined: 23 Jun 2012 09:14
Location: Athens, Greece
Contact:
Status: Offline

Re: [EXTENSION] Extended GUI

#304

Post by ChriZathens » 30 Nov 2015 12:47

Yeap, just tried 1955 and got the same.
I personally don't care (planning to upgrade to 10), but if others need it...
My Nas
  1. Case: Fractal Design Define R2
  2. M/B: Supermicro x9scl-f
  3. CPU: Intel Celeron G1620
  4. RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
  5. PSU: Chieftec 850w 80+ modular
  6. Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
  7. O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
  8. Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S

Backup Nas: HP N40L (4x1TB HP branded Seagate disks in RaidZ configuration - 8GB ECC RAM)

Cramin
Starter
Starter
Posts: 30
Joined: 14 Jul 2014 07:57
Location: Myszkow (Poland)
Contact:
Status: Offline

Re: [EXTENSION] Extended GUI

#305

Post by Cramin » 30 Nov 2015 22:42

New install. 10.2.0.2 - Prester (revision 2118)
Installed Extended GUI 5.1.1
One SSH session. Disabled and enabled Extended GUI or change Extended to Standard and to Extended don't reset Users in homepage.
extended1.gif
You do not have the required permissions to view the files attached to this post.
Intel SS4200-E - 11.2.0.4 - Omnius P2C E2200 + 2GB DDR2 + 2x (Raid1 2x500GB WD) - Home
MSI G41M-P28 S771Mod - 11.2.0.4 - Omnius Xeon E5320 + 4GB DDR3 + Raid1 2x500GB Samsung - Work

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#306

Post by crest » 01 Dec 2015 08:38

Hello Cramin!
Cramin wrote:New install. 10.2.0.2 - Prester (revision 2118)
Installed Extended GUI 5.1.1
One SSH session. Disabled and enabled Extended GUI or change Extended to Standard and to Extended don't reset Users in homepage.
I assume you have CIFS/SMB not enabled?
Try to enable CIFS/SMB and after that restart eGUI, should solve this problem. A fix will come with the next release of eGUI.

Regards
crest
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#307

Post by crest » 02 Dec 2015 07:48

Hello all,

there is a new maintenance release (v0.5.1.2) of this extension available => [EXTENSION] Extended GUI.

For a list of the changes take a look at the Version History. Updates can be performed directly via the extension maintenance tab in the WebGUI.

Regards
crest
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#308

Post by crest » 02 Dec 2015 07:55

@dima9751 & @Cramin - v0.5.1.2 covers your issues ... ;)

regards
crest
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

dima9751
NewUser
NewUser
Posts: 5
Joined: 24 Dec 2014 17:30
Status: Offline

Re: [EXTENSION] Extended GUI

#309

Post by dima9751 » 02 Dec 2015 09:37

crest wrote:@dima9751 & @Cramin - v0.5.1.2 covers your issues ... ;)

regards
crest
It Works!

Thanks you for supporting us.

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#310

Post by crest » 11 Dec 2015 12:13

Hello all,

for the next release of eGUI I already implemented the display of SSDs with the lifetime value
screen_20151211_121057.png
Since the SSD vendors use different parameters for the lifetime value I would need the output of

Code: Select all

smartctl -a /dev/adaX
whereas adaX is the driver name of your SSD, e.g. ada2 ... without partition.

It would be helpful to get this information for different SSDs to see which params are used for the lifetime counter.

Thanks in advance,
crest
You do not have the required permissions to view the files attached to this post.
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

mraerosmith
NewUser
NewUser
Posts: 11
Joined: 23 Aug 2014 13:08
Status: Offline

Re: [EXTENSION] Extended GUI

#311

Post by mraerosmith » 13 Dec 2015 16:49

A very quick one, I have 9 disks installed but egui is only showing 8 and not the most recently added one, I cant find anything in the menus to indicate how to make it show the new one, am I missing something ?

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#312

Post by crest » 15 Dec 2015 04:57

mraerosmith wrote:A very quick one, I have 9 disks installed but egui is only showing 8 and not the most recently added one, I cant find anything in the menus to indicate how to make it show the new one, am I missing something ?
If you add a new disk restart eGUI from the extension WebGUI and refresh the STATUS|SYSTEM page, the newly added disk should show up there. If not please send me the disk configuration.

Regards
crest
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

fallen2109
Starter
Starter
Posts: 47
Joined: 27 Oct 2014 22:38
Location: The Netherlands
Status: Offline

Re: [EXTENSION] Extended GUI

#313

Post by fallen2109 » 15 Dec 2015 11:01

Excuse my profanity, but where can I get the latest (0.5.1.2) version of Extended GUI for download? I have searched around, but the latest download available is v 0.5.0.1.

Thank you for your help :)
11.0.0.4 - Sayyadina (revision 3330)
x64-full on Intel(R) Xeon(R) CPU L5640 @ 2.27GHz (Dual CPU)
Supermicro X8DT3, 48 GB Ram

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#314

Post by crest » 15 Dec 2015 13:17

fallen2109 wrote:Excuse my profanity, but where can I get the latest (0.5.1.2) version of Extended GUI for download? I have searched around, but the latest download available is v 0.5.0.1.

Thank you for your help :)
No problem, take a look at the installation procedure at the first post of this thread, you can update directly within the extension under the maintenance tab.
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

User avatar
alexey123
Moderator
Moderator
Posts: 1563
Joined: 19 Aug 2012 08:22
Location: Israel, Karmiel
Contact:
Status: Offline

Re: [EXTENSION] Extended GUI

#315

Post by alexey123 » 28 Dec 2015 00:55

Hi, crest

Extended gui replace guiconfig.inc, isn't it?
User have problem with minidlna viewtopic.php?p=63441#p63441 , please manage replacement
Guiconfig was changed at 2018 revision http://sourceforge.net/p/nas4free/code/ ... d00f2:2018

Good advice for replace system file such guiconfig.inc - use patch command
Home11.0.0.4 - Sayyadina (revision 4249)/ x64-embedded on SAPPHIRE Pure Mini E350 / 8G RAM / UPS Ippon Back Power Pro 600
Lab 10.2.0.2 - Prescience (revision 2545) /x64-embedded on Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz / H61M-DS2 / 4G RAM / UPS Ippon Back Power Pro 600
New XigmanasXigmaNAS version 11.2.0.4.6026 on x64-embedded on AMD A8-7600 Radeon R7 A88XM-PLUS/ 16G RAM
TEST1 11.0.0.4 - Pilingitam (revision 4333) bpi-embedded on Allwinner a20 / 1015MiB RAM

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#316

Post by crest » 28 Dec 2015 05:13

alexey123 wrote: Extended gui replace guiconfig.inc, isn't it?
User have problem with minidlna viewtopic.php?p=63441#p63441 , please manage replacement
Guiconfig was changed at 2018 revision http://sourceforge.net/p/nas4free/code/ ... d00f2:2018
It depends on which version of Extended GUI is used - since v0.5 the files guiconfig.inc and system.inc are no longer replaced.
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

drnicolas
Advanced User
Advanced User
Posts: 182
Joined: 15 Aug 2013 14:03
Location: Wiesbaden, Germany
Status: Offline

Re: [EXTENSION] Extended GUI

#317

Post by drnicolas » 28 Dec 2015 09:17

Where can I download the latest GUI?
I have an older version (0.4.x) and there seems not to be a update mechanism so far.
HP Proliant N54L - Bios Mod -16GB non-ECC-RAM - ZFS RAIDZ1 (3x3TB) - 1VM running XigmaNAS 11.2.0.4.6026

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#318

Post by crest » 28 Dec 2015 10:14

drnicolas wrote:Where can I download the latest GUI?
I have an older version (0.4.x) and there seems not to be a update mechanism so far.
Please follow the installation instructions here => Extended GUI
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

bgold
Starter
Starter
Posts: 59
Joined: 23 May 2015 08:42
Status: Offline

Re: [EXTENSION] Extended GUI

#319

Post by bgold » 28 Dec 2015 17:28

recycle bins. Is there a way to refresh this without having to reboot? I have disabled and re-enabled extended gui and it will not find the new bins?

Thanks
XigmaNAS 12.0.0.4.6625
HP ML150 Gen9, Dual 2.4ghz, 256gb, 25TB Storage, 3-ZFS pools w/SSD cache&logs, SSD boot/data, SFP+

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#320

Post by crest » 28 Dec 2015 18:27

bgold wrote:recycle bins. Is there a way to refresh this without having to reboot? I have disabled and re-enabled extended gui and it will not find the new bins?

Thanks
There is no need to reboot or disable and enable the extension, the recycle bins are detected automatically at every run of the script. But be aware that samba creates recycle bins in the file system with the first deleted file in a share so if you expect to see it in the extension for a newly created share you should delete a file first ... ;)
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

proto111
NewUser
NewUser
Posts: 1
Joined: 26 Jan 2016 20:20
Status: Offline

Re: [EXTENSION] Extended GUI

#321

Post by proto111 » 26 Jan 2016 21:00

Hello Crest,

Thanks a lot for this extension ! Very well done.
There seems to be just a little problem for me : I have 5 disks in the standard view, but only 3 in the extended view !
The standard view :
Standard.jpg
The extended view :
Extended.jpg
Do you see the problem ?

Thanks for your help !
You do not have the required permissions to view the files attached to this post.

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#322

Post by crest » 27 Jan 2016 08:44

Hello proto111,
proto111 wrote: There seems to be just a little problem for me : I have 5 disks in the standard view, but only 3 in the extended view !
The standard view :
Standard.jpg
The extended view :
Extended.jpg
Do you see the problem ?
Thank you ;)

Try to restart (Save) eGUI from the extension Configuration page (the System calls service status must be running after the restart.
After that refresh the STATUS|SYSTEM page to see if something changed.

If it's still the same pls send me the file CONFIG2 from /var/scripts and the output of the command

Code: Select all

df -h
.

Regards
crest
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

mbze430
experienced User
experienced User
Posts: 106
Joined: 20 Nov 2014 05:41
Status: Offline

Re: [EXTENSION] Extended GUI

#323

Post by mbze430 » 28 Jan 2016 05:58

is something wrong with github or something... I can't download the extended-gui using the fetch https address....
NAS #1 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SL7-F w/ 24GB ECC - LSI SAS 9207-16i - 2x RAIDZ1 (10x3TB) Pools and 1x (2x4TB) Stripe Pool
NAS #2 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SLM-F w/32GB ECC - LSI SAS 9207-8i (RAID10) - IBM M1015-IT Mode (RAID10)

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#324

Post by crest » 28 Jan 2016 06:24

Hello again,
mbze430 wrote:is something wrong with github or something... I can't download the extended-gui using the fetch https address....
No, there is nothing wrong with github, I tried just now to download the package, went smoothly ... seems to be also related to the problem you reported here -> viewtopic.php?f=71&t=8299&p=64783#p63385

Pls try the following command in the CLI

Code: Select all

fetch -vo master.zip 'https://github.com/crestAT/nas4free-extended-gui/releases/download/v0.5.1.2/extended-gui-v0512.zip'
You should get this

Code: Select all

-rw-r--r--  1 root  wheel  94491 Dec  2 07:26 master.zip
Btw, are you logged in as root?
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

mbze430
experienced User
experienced User
Posts: 106
Joined: 20 Nov 2014 05:41
Status: Offline

Re: [EXTENSION] Extended GUI

#325

Post by mbze430 » 28 Jan 2016 09:14

medianas: extensions# fetch -vo master.zip 'https://github.com/crestAT/nas4free-ext ... -v0512.zip'
looking up github.com
connecting to github.com:443
fetch: https://github.com/crestAT/nas4free-ext ... -v0512.zip: Operation timed out
medianas: extensions#
I don't know I am having so much trouble with getting stuff off github.

And yes I am logged in as root
medianas: ~# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: icmp_seq=0 ttl=51 time=13.139 ms
64 bytes from 8.8.8.8: icmp_seq=1 ttl=51 time=13.651 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=51 time=14.527 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=51 time=13.681 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=51 time=12.288 ms
64 bytes from 8.8.8.8: icmp_seq=5 ttl=51 time=14.905 ms
^C
--- 8.8.8.8 ping statistics ---
6 packets transmitted, 6 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 12.288/13.699/14.905/0.861 ms
Internet connection is fine too
NAS #1 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SL7-F w/ 24GB ECC - LSI SAS 9207-16i - 2x RAIDZ1 (10x3TB) Pools and 1x (2x4TB) Stripe Pool
NAS #2 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SLM-F w/32GB ECC - LSI SAS 9207-8i (RAID10) - IBM M1015-IT Mode (RAID10)

nffstedt
NewUser
NewUser
Posts: 2
Joined: 09 Feb 2016 18:50
Status: Offline

Re: [EXTENSION] Extended GUI

#326

Post by nffstedt » 09 Feb 2016 19:12

Trying to install this extension and coming across some issues.

After creating a /DATA/extensions dir I find that the listed code in Step 2 doesn't seem to work:
cd /mnt/DATA/extensions && fetch https://raw.github.com/crestAT/nas4free ... nstall.php && chmod 770 extended-gui*install.php && echo "fetch OK"

First thing I notice is that on trying to access the address it is redirected to:
https://raw.githubusercontent.com/crest ... nstall.php

I also noticed that in the code at that location, there are references to 'extended-gui-install.php' and not 'extended-gui_install.php'

After manually saving and renaming the file to the appropriate location and trying Step 3:
/mnt/DATA/extensions/extended-gui_install.php

I get the the following response:
Installation file 'extended-gui-install.php' not found, installation aborted!

Has this extension been abandoned?

willrun4fun
NewUser
NewUser
Posts: 5
Joined: 11 Feb 2016 23:12
Status: Offline

Re: [EXTENSION] Extended GUI

#327

Post by willrun4fun » 12 Feb 2016 21:44

Each time I reboot I have to reinstall the extension. What can I do?
Willrun4fun
X10SLL-F, i5-4590, 16GB ECC, four 2TB Toshiba 7200k, Kingston 120GB SSD boot, Antec Three Hundred, EVGA 500B

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#328

Post by crest » 13 Feb 2016 10:11

nffstedt wrote:Trying to install this extension and coming across some issues.

After creating a /DATA/extensions dir I find that the listed code in Step 2 doesn't seem to work:
cd /mnt/DATA/extensions && fetch https://raw.github.com/crestAT/nas4free ... nstall.php && chmod 770 extended-gui*install.php && echo "fetch OK"

First thing I notice is that on trying to access the address it is redirected to:
https://raw.githubusercontent.com/crest ... nstall.php
This is maybe an Github internally issue but the download still works ... :?:
I also noticed that in the code at that location, there are references to 'extended-gui-install.php' and not 'extended-gui_install.php'

After manually saving and renaming the file to the appropriate location and trying Step 3:
/mnt/DATA/extensions/extended-gui_install.php
Do you mean that you edited the installation file? The reference to 'extended-gui-install.php' is correct, don't change it. It's a two stage installation because 'extended-gui-install.php' is also used for the update of the extension which can be performed directly in the WebGUI.
Has this extension been abandoned?
Not at all :lol: after finishing the work on my other extensions I am planning to add new features to eGUI again.

Regards
crest
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#329

Post by crest » 13 Feb 2016 10:13

Hello willrun4fun,
willrun4fun wrote:Each time I reboot I have to reinstall the extension. What can I do?
Do you use an embedded installation of N4F and did you install the extension to a persistant directory, following my installation guide in the first post of this thread?

Regards
crest
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 873
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#330

Post by crest » 13 Feb 2016 10:21

mbze430 wrote:
medianas: extensions# fetch -vo master.zip 'https://github.com/crestAT/nas4free-ext ... -v0512.zip'
looking up github.com
connecting to github.com:443
fetch: https://github.com/crestAT/nas4free-ext ... -v0512.zip: Operation timed out
medianas: extensions#
I don't know I am having so much trouble with getting stuff off github.

And yes I am logged in as root

...

Internet connection is fine too
Do you still have problems downloading the file, I tested the download some times and was allways successful ... :?:
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

Post Reply

Return to “Extensions / Add-ons”