*New 11.3 series Release:
2019-10-05: XigmaNAS 11.3.0.4.6928 - released, 11.2 series are soon unsupported!

*New 12.0 series Release:
2019-10-05: XigmaNAS 12.0.0.4.6928 - released!

*New 11.2 series Release:
2019-09-23: XigmaNAS 11.2.0.4.6881 - released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

Problem add additional ip address

Everything to improve your speed, LAGG, VLAN, VPN, Port Forwarding, DNS, Gateway
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
show
NewUser
NewUser
Posts: 1
Joined: 17 Jan 2017 18:08
Location: Ukraine
Status: Offline

Problem add additional ip address

#1

Post by show » 17 Jan 2017 18:15

I add in rc.conf this line:
ifconfig_re0="192.168.1.250/24"
ifconfig_re1="192.168.2.1/24"

But, after reboot there is only one line ifconfig_re0="192.168.1.250/24"
tell me how to apply my changes?

User avatar
zoon01
Developer
Developer
Posts: 766
Joined: 20 Jun 2012 21:06
Location: Netherlands
Contact:
Status: Offline

Re: Problem add additional ip address

#2

Post by zoon01 » 17 Jan 2017 19:50

You should use the webgui menu network!

See Network > LAN Management for re0 and opt1 for re1
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.84 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz

Development system is same system in virtualbox.

Post Reply

Return to “XigmaNAS Networking Tune-up”