*New 11.3 series Release:
2019-10-05: XigmaNAS 11.3.0.4.6928 - released, 11.2 series are soon unsupported!

*New 12.0 series Release:
2019-10-05: XigmaNAS 12.0.0.4.6928 - released!

*New 11.2 series Release:
2019-09-23: XigmaNAS 11.2.0.4.6881 - released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

Iperf

Everything to improve your speed, LAGG, VLAN, VPN, Port Forwarding, DNS, Gateway
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
alex
Starter
Starter
Posts: 18
Joined: 04 Jul 2012 03:26
Status: Offline

Iperf

#1

Post by alex » 12 Mar 2015 20:37

How to install Iperf on NAS4FREE?

User avatar
ernie
Forum Moderator
Forum Moderator
Posts: 1416
Joined: 26 Aug 2012 19:09
Location: France - Val d'Oise
Status: Offline

Re: Iperf

#2

Post by ernie » 12 Mar 2015 20:54

With Nayla version, you have iperf3.
It works well.
You can install on Linux system also (I tested with Fedora)

So normally you have already. Except if you need specific function of iperf and iperf3 doesn't have it.
NAS 1&2:
System: GA-6LXGH(BIOS: R01 04/30/2014) / 16 Go ECC
XigmaNAS 12.0.0.4.6766 embedded
NAS1: Xeon E3 1241@3.5GHz, 4HDD@2To/raidz2 (WD red), 3HDD@300Go/sas/raidz1 (Hitachi), 1SSD cache, Zlog on sas mirror
NAS2: G3220@3GHz, 3HDD@2To/raidz1 (Seagate), 1SSD cache, 1HDD@300Go/UFS
UPS: APC Back-UPS RS 900G
Case : Fractal Design XL R2

Extensions & services:
NAS1: OBI (Plex, extendedGUI, BTSync, zrep, rclone), nfs, UPS,
NAS2: OBI (extendedGUI, zrep (backup mode))

alex
Starter
Starter
Posts: 18
Joined: 04 Jul 2012 03:26
Status: Offline

Re: Iperf

#3

Post by alex » 13 Mar 2015 09:26

Thank you ,but how to start iperf3 on NAS?

User avatar
crowi
Forum Moderator
Forum Moderator
Posts: 1184
Joined: 21 Feb 2013 16:18
Location: Munich, Germany
Status: Offline

Re: Iperf

#4

Post by crowi » 13 Mar 2015 11:31

via the shell
NAS 1: Milchkuh: Asrock C2550D4I, Intel Avoton C2550 Quad-Core, 16GB DDR3 ECC, 5x3TB WD Red RaidZ1 +60 GB SSD for ZIL/L2ARC, APC-Back UPS 350 CS, NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded

alex
Starter
Starter
Posts: 18
Joined: 04 Jul 2012 03:26
Status: Offline

Re: Iperf

#5

Post by alex » 14 Mar 2015 03:15

Iperf3 -s for server side?

User avatar
ernie
Forum Moderator
Forum Moderator
Posts: 1416
Joined: 26 Aug 2012 19:09
Location: France - Val d'Oise
Status: Offline

Re: Iperf

#6

Post by ernie » 14 Mar 2015 04:31

Yes
And for the client
iperf3 -c <ip_to_nas>
NAS 1&2:
System: GA-6LXGH(BIOS: R01 04/30/2014) / 16 Go ECC
XigmaNAS 12.0.0.4.6766 embedded
NAS1: Xeon E3 1241@3.5GHz, 4HDD@2To/raidz2 (WD red), 3HDD@300Go/sas/raidz1 (Hitachi), 1SSD cache, Zlog on sas mirror
NAS2: G3220@3GHz, 3HDD@2To/raidz1 (Seagate), 1SSD cache, 1HDD@300Go/UFS
UPS: APC Back-UPS RS 900G
Case : Fractal Design XL R2

Extensions & services:
NAS1: OBI (Plex, extendedGUI, BTSync, zrep, rclone), nfs, UPS,
NAS2: OBI (extendedGUI, zrep (backup mode))

alex
Starter
Starter
Posts: 18
Joined: 04 Jul 2012 03:26
Status: Offline

Re: Iperf

#7

Post by alex » 14 Mar 2015 05:06

Thank you

Post Reply

Return to “XigmaNAS Networking Tune-up”