*New 11.4 series Release:
2020-07-03: XigmaNAS 11.4.0.4.7633 - released!

*New 12.1 series Release:
2020-04-17: XigmaNAS 12.1.0.4.7542 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

Posts only related to Release Builds, all others will be removed!
Forum rules
Set-Up GuideFAQsForum Rules
User avatar
zoon01
Developer
Developer
Posts: 799
Joined: 20 Jun 2012 21:06
Location: Netherlands
Contact:
Status: Offline

NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#1

Post by zoon01 »

The NAS4Free Team is pleased to announce the release of version 11.0.0.4.3460 - Sayyadina

https://sourceforge.net/projects/nas4fr ... .0.4.3460/
Read the readme_11.0


Major Change!
Note for 32-bits users:
===================
We believe that the use of 32-bits versions can not give the end users it's full potential of the OS, for this
further development on the (i386) 32-bits architecture has been stopped upon the 11.0.0.3.xxxx series.
Current 32-bits users are able to use 32-bits 10.3.0.3.xxxx series until their end of life or do reinstall
to use 64-bits NAS4Free and restore config.

Again TIP: Do not upgrade from 10 series directly!
reinstall and restore config is the way to go because of increased partition size!
You avoid lots of problems later on.

Upgrade note:
=============
RRDGraphs extension can no longer be used with 11.x series, disable and deinstall before upgrade!
RRDGraphs are now included in 11.x series, you can setup on webgui System > Advanced > Monitoring Setup.
Do not reinstall the extension!!!

BUILD 11.0.0.4.3460
==================
Changes:
- Upgrade to FreeBSD 11.0-RELEASE-P7.
- Update translations.
- Add WOL support for newer em(4) devices.
- Add needed port icu.
- Add Catalan translation.
- Upgrade virtualbox-ose to 5.1.12.
- Upgrade samba to 4.3.13.
- Upgrade nano to 2.7.4.
- Upgrade syncthing to 0.14.19.
- Upgrade iperf3 to 3.1.5.
- Upgrade noVNC to 0.6.2.
- Upgrade mDNSResponder to 765.30.11.
- Upgrade libvncserver to 0.9.11.
- Upgrade lighttpd to 1.4.45.
- Upgrade sudo to 1.8.19p2.
- Upgrade php to 7.0.15.
- Reports increased with 50 more log lines.
- Framework and code improvements.

Fixes:
- Fix don't add domain parameter when domain is empty.

Known bugs:
===========
- IE11 and Edge browser does not operate correctly with novnc. Enter & Escape button problematic,
this will be fixed at a later release, use Chrome or other browser or connect with putty client.

Enjoy!

Regards,
The NAS4Free Team
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz

Development system is same system in virtualbox.

almirjakubaitis
NewUser
NewUser
Posts: 14
Joined: 19 Jun 2016 04:52
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#2

Post by almirjakubaitis »

Updated from .3330 - It's all right! Works greatly.
Thanks!
System specs:
NAS #1
Version: NAS4Free 11.0.0.4 (revision 5019) CPU: Supermicro X8SIL /x64 Xeon(R) CPU L3406 @ 2.27GHz
RAM: 16GB DDR3 ECC UDIMM/ STORAGE: 5x 2TB HTSG raidz1-0 @ zfs

NAS #2
Version: NAS4Free 11.0.0.4 (revision 5019) CPU: Supermicro X8SIL /x64 Xeon(R) CPU X3430 @ 2.40GHz
RAM: 16GB DDR3 ECC RDIMM/ STORAGE: 5x 2TB raidz1-0 @ zfs

NAS #3
Version: NAS4Free 11.0.0.4 (revision 5019) CPU: x64-embedded on Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
RAM: 8GB DDR2 / STORAGE: 1x 8TB Stripe @ zfs

User avatar
uniss
Starter
Starter
Posts: 24
Joined: 29 Aug 2014 19:01
Location: Dnipro, Ukraine
Contact:
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#3

Post by uniss »

Changes:
...
- Upgrade sudo to 1.8.19p1.
...
- Upgrade sudo to 1.8.19p2.
???
:idea: HP N40L, 16 GB RAM, 3x8TB WD Red, 3x4TB WD Red, XN 12.1.0.4.7091 embedded

User avatar
JoseMR
Hardware & Software Guru
Hardware & Software Guru
Posts: 1145
Joined: 16 Apr 2014 04:15
Location: PR
Contact:
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#4

Post by JoseMR »

uniss wrote:
18 Jan 2017 06:37
Changes:
...
- Upgrade sudo to 1.8.19p1.
...
- Upgrade sudo to 1.8.19p2.
???

Old line will be removed, ps Use "sudo -V" to display version.

Code: Select all

nas4free: ~# sudo -V
Sudo version 1.8.19p2...
System: FreeBSD 12 RootOnZFS Mirror, MB: Supermicro X8SI6-F, Xeon X3450, 16GB DDR3 ECC RDIMMs.
XigmaNAS RootOnZFS
Addons at GitHub
BastilleBSD
Boot Environments Intro
Resources Home Page

User avatar
zoon01
Developer
Developer
Posts: 799
Joined: 20 Jun 2012 21:06
Location: Netherlands
Contact:
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#5

Post by zoon01 »

My misstake, i just fixed the double susdo line on changes file, yes of course we use the latest sudo 1.8.19p2 release and we dropped the older 1.8.19p1 version.
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz

Development system is same system in virtualbox.

Victek
Starter
Starter
Posts: 45
Joined: 01 Jul 2012 20:23
Location: Barcelona - Spain
Contact:
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#6

Post by Victek »

Hi, updated and running!, Catalan language, rocks !!
Build: XigmaNAS 12.1.0.4 (rev. 7509) amd64-embedded on Sandisk 64GB SSD. Supermicro X10SLL-F-Bios v3.2- Intel(R) Xeon(R) CPU E3-1231 v3 @ 3.40GHz - 32GB Crucial DDR3 ECC (CT102472BD160B), LSI 2008-8i IT mode, Storage: 3x Seagate Ironwolf 10TB. Raidz. Enclosure; Fractal Design R6.

User avatar
crowi
Forum Moderator
Forum Moderator
Posts: 1182
Joined: 21 Feb 2013 16:18
Location: Munich, Germany
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#7

Post by crowi »

updated 3/3 systemsnow, all running fine.
Thanks again to the developers. :)
NAS 1: Milchkuh: Asrock C2550D4I, Intel Avoton C2550 Quad-Core, 16GB DDR3 ECC, 5x3TB WD Red RaidZ1 +60 GB SSD for ZIL/L2ARC, APC-Back UPS 350 CS, NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded

Jarf
NewUser
NewUser
Posts: 6
Joined: 20 Dec 2016 20:27
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#8

Post by Jarf »

I upgraded from nas4free 10 to 11 and only have 4gb of RAM. On nas4free 10 it was running fine with a usage around 10%. Unfortunately with this update (11.0.0.4.3460) my usage has increased to 85%. Is this the case by more people too?

Maybe it is also caused by the upgrade from embedded to full install?

User avatar
apollo567
Site Admin
Site Admin
Posts: 745
Joined: 23 Jun 2012 06:37
Location: Ludwigshafen, Germany
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#9

Post by apollo567 »

Jarf wrote:
22 Jan 2017 17:42
Maybe it is also caused by the upgrade from embedded to full install?
Why did you use full install ? Ist there a special reason / intention for doing so ?
The recommended version for most user is the embedded version
my NAS and its development until today: viewtopic.php?f=63&t=39&sid=039fed830cf ... 4d0abe4a04

Jarf
NewUser
NewUser
Posts: 6
Joined: 20 Dec 2016 20:27
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#10

Post by Jarf »

apollo567 wrote:
22 Jan 2017 20:30

Why did you use full install ? Ist there a special reason / intention for doing so ?
The recommended version for most user is the embedded version
Yea, I'm trying to install openvpn and because I dont have that much RAM I think it's a bad idea to use jails. But for now I do not have succes with the install.

That is the reason 8-). Can the RAM-usage be caused due to the latest version or is it just the full install?

User avatar
crowi
Forum Moderator
Forum Moderator
Posts: 1182
Joined: 21 Feb 2013 16:18
Location: Munich, Germany
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#11

Post by crowi »

do you use ZFS? if yes, the high RAM useage is normal behaviour, because ZFS grabs almost all available RAM for caching.
NAS 1: Milchkuh: Asrock C2550D4I, Intel Avoton C2550 Quad-Core, 16GB DDR3 ECC, 5x3TB WD Red RaidZ1 +60 GB SSD for ZIL/L2ARC, APC-Back UPS 350 CS, NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded

User avatar
raulfg3
Site Admin
Site Admin
Posts: 5119
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#12

Post by raulfg3 »

great fail on 3460 on DLNA service.

I can't see buttons, see my screen capture:
1.jpg
You do not have the required permissions to view the files attached to this post.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

HP T510

Jarf
NewUser
NewUser
Posts: 6
Joined: 20 Dec 2016 20:27
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#13

Post by Jarf »

crowi wrote:
23 Jan 2017 10:01
do you use ZFS? if yes, the high RAM useage is normal behaviour, because ZFS grabs almost all available RAM for caching.
Thanks for your post! Since I'm not experienced I did not know that. I will start a thread about it in the appropriate section of this forum since I could not find exactly what settings I need to change for that. :roll:

User avatar
Andrey_BAM
Starter
Starter
Posts: 51
Joined: 06 Feb 2013 21:07
Location: Rostov-on-Don, Russia
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#14

Post by Andrey_BAM »

raulfg3 wrote:
23 Jan 2017 22:37
great fail on 3460 on DLNA service.

I can't see buttons, see my screen capture:

1.jpg
Click edit
XigmaNAS 12.1.0.4 - Ingva (revision 7091) x64-embedded
MB: ASUS C60M1-I, CPU: AMD С-60(on-board), Mem: 8GB, LAN: Realtek® 8111F(on-board), Storage: ZFS (1TB - Rsync local - 2TB)

User avatar
raulfg3
Site Admin
Site Admin
Posts: 5119
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#15

Post by raulfg3 »

ok, edit work.

I need to adapt me to new interface, sorry .
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

HP T510

rth
Starter
Starter
Posts: 19
Joined: 21 Dec 2014 17:34
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#16

Post by rth »

Still problems with Wake on lan with this version and previous 2 versions on HP N40L with 2GB. On network/Lan management I have tried a couple of extra options which just caused the system to fail to boot correctly. What is the correct syntax for this please in this version.
Previous problems with erratic backups were solved by changing the SMB max protocols to SMB_11 thanks to advice on this forum.

User avatar
zoon01
Developer
Developer
Posts: 799
Joined: 20 Jun 2012 21:06
Location: Netherlands
Contact:
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#17

Post by zoon01 »

rth wrote:
24 Jan 2017 12:46
Still problems with Wake on lan with this version and previous 2 versions on HP N40L with 2GB. On network/Lan management I have tried a couple of extra options which just caused the system to fail to boot correctly. What is the correct syntax for this please in this version.
Previous problems with erratic backups were solved by changing the SMB max protocols to SMB_11 thanks to advice on this forum.
I can understand you think it's a problem. the truth is that to support wol in 10 series etc. we had to modify the bge driver.
This has not been done in the 11 series bge driver nor do I plan to do. I think for proper wol support it must be fixed upstream in FreeBSD bge driver itself. If they made the choice not todo so than add/replace the nic for an intel is my advise.
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz

Development system is same system in virtualbox.

User avatar
ChriZathens
Forum Moderator
Forum Moderator
Posts: 799
Joined: 23 Jun 2012 09:14
Location: Athens, Greece
Contact:
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#18

Post by ChriZathens »

I believe they will fix it, eventually.
After all, a lot of servers use Broadcom LAN chips.
My Nas
  1. Case: Fractal Design Define R2
  2. M/B: Supermicro x9scl-f
  3. CPU: Intel Celeron G1620
  4. RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
  5. PSU: Chieftec 850w 80+ modular
  6. Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
  7. O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
  8. Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S

Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)

User avatar
Princo
Forum Moderator
Forum Moderator
Posts: 1082
Joined: 15 Jul 2012 01:21
Location: Berlin, Germany
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#19

Post by Princo »

The upload/download section is missing in "Tools > Execute Command"
Meine Antworten beziehen sich immer auf die englischsprachige GUI. ECC-RAM ist Pflicht beim Einsatz von ZFS.

User avatar
zoon01
Developer
Developer
Posts: 799
Joined: 20 Jun 2012 21:06
Location: Netherlands
Contact:
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#20

Post by zoon01 »

Princo wrote:
26 Jan 2017 22:42
The upload/download section is missing in "Tools > Execute Command"
No, not really missing :) there are other ways to add files to the system :)
This was done on purpose.

=================
We need user votes!
https://sourceforge.net/p/potm/discussi ... f6/?page=1
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz

Development system is same system in virtualbox.

slaycock
experienced User
experienced User
Posts: 89
Joined: 24 Jun 2012 17:15
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#21

Post by slaycock »

Yet again an upgrade fails. Tried to upgrade two machines last night. Both doing 11.0.0.4.337? to 11.0.0.4.3460 Both upgraded but did not restore the config. I use 192.168.2.xxx for my home network. Perhaps its going to be easier to learn how to build NAS4free myself so that I can patch the default web address.

Otherwise how do I track down what is going wrong?

User avatar
zoon01
Developer
Developer
Posts: 799
Joined: 20 Jun 2012 21:06
Location: Netherlands
Contact:
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#22

Post by zoon01 »

If a config restore fails in current series than its most likely another problem.
I would start by replace the current usb key where you installed embedded on for a new faster/better version.

You are able to see on console/monitor now where it goes wrong when you perform an firmware flash.

I have 2 types (are new) sandisk usb keys here, with one of the types I now and than can reproduce config restore fails.
The other one has never failed on me with sometimes 1 to 6 firmware upgrades a day!
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz

Development system is same system in virtualbox.

slaycock
experienced User
experienced User
Posts: 89
Joined: 24 Jun 2012 17:15
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#23

Post by slaycock »

Two different servers. One uses a Kingston datatraveller USB 3.0 drive, the other a CF card in a USB adaptor. I'll look at different USB drives. What model works upto times a day?

User avatar
Snufkin
Advanced User
Advanced User
Posts: 339
Joined: 01 Jul 2012 11:27
Location: Etc/GMT-3 (BSD style)
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#24

Post by Snufkin »

slaycock wrote:One uses a Kingston datatraveller USB 3.0 drive, the other a CF card in a USB adaptor. I'll look at different USB drives. What model works upto times a day?
My experience is
  • Transcend CompactFlash 133x (CF), JetFlash (USB 2.0) and SanDisk Cruzer Fit (USB 2.0) are good.
  • Kingston Data Traveler (USB 2.0) failed in virtual environment, but worked on real hardware.
XNAS 11.4.0.4 embedded, ASUS P5B-E, Intel DC E6600, 4 GB DDR2
ZFS 2 x HGST HDN726040ALE614, L2ARC PLEXTOR PX-128M5S

jamaroney
Advanced User
Advanced User
Posts: 259
Joined: 13 Aug 2012 17:32
Location: Stroudsburg, PA
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#25

Post by jamaroney »

Jarf wrote:
22 Jan 2017 21:22
apollo567 wrote:
22 Jan 2017 20:30
Why did you use full install ? Ist there a special reason / intention for doing so ?
The recommended version for most user is the embedded version
Yea, I'm trying to install openvpn and because I dont have that much RAM I think it's a bad idea to use jails. But for now I do not have succes with the install.

That is the reason 8-). Can the RAM-usage be caused due to the latest version or is it just the full install?
I have only 4GB Ram on my x64 quad-core N4F 11.0.0.4.3460, and memory usage is consistently at around 35% with an embedded install w/ no swap partition.

FYI - I don't like jails, either. But I have been running openvpn and other programs (Sickrage, Plex) for a number of years now via mount_unionfs, and haven't had any problems whatsoever.

jamaroney
Advanced User
Advanced User
Posts: 259
Joined: 13 Aug 2012 17:32
Location: Stroudsburg, PA
Status: Offline

losing internet connection with 3460

#26

Post by jamaroney »

Has anyone else had problems with losing Internet connectivity with 3460? Several times over the last few days, in the midst of downloading torrents, the N4F loses connectivity (no ping), and I have to reboot. The logs show nothing, and all processes are still running.

I'm going to wait a few more days to see if and how often it recurs. If it does, I'll revert back to previous 11.0.0.4 version and see if things improve.

User avatar
raulfg3
Site Admin
Site Admin
Posts: 5119
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: losing internet connection with 3460

#27

Post by raulfg3 »

jamaroney wrote:
28 Jan 2017 12:51
Has anyone else had problems with losing Internet connectivity with 3460? Several times over the last few days, in the midst of downloading torrents, the N4F loses connectivity (no ping), and I have to reboot. The logs show nothing, and all processes are still running.

I'm going to wait a few more days to see if and how often it recurs. If it does, I'll revert back to previous 11.0.0.4 version and see if things improve.
No problems here.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

HP T510

tdlmarek
NewUser
NewUser
Posts: 3
Joined: 28 Jan 2017 23:10
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#28

Post by tdlmarek »

I've recently upgraded from 10.3.0.3 to 11.0.0.4, almost everything works nicely, except VirtualBox and noVNC. No matter what I try I always get "Failed to connect to server", there is also "Failed when connecting: Failed to connect to server ( (code: 1006))" in the web browser console.

There are no problems when I try to connect to the same host via TightVNC from my desktop.

My NAS4Free server is running on HTTPS, secured by Let's Encrypt certificate. When I fall back to HTTP and uncheck "Encrypt" in noVNC web interface, connection also works.

The thing is, I don't want to use unsecured HTTP as I often access my server remotely via Internet. Also, on 10.3.0.3, noVNC worked nicely even with HTTPS.

Any suggestions?

User avatar
ernie
Forum Moderator
Forum Moderator
Posts: 1453
Joined: 26 Aug 2012 19:09
Location: France - Val d'Oise
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#29

Post by ernie »

Hello
Which navigators are you using ?
There is a note for last releases 11.x (after 3330):
IE11 and Edge browser does not operate correctly with novnc. Enter & Escape button problematic,
this will be fixed at a later release, use Chrome or other browser or connect with putty client.
NAS 1&2:
System: GA-6LXGH(BIOS: R01 04/30/2014) / 16 Go ECC
XigmaNAS 12.1.0.4 - Ingva (revision 7542) embedded
NAS1: Xeon E3 1241@3.5GHz, 4HDD@2To/raidz2 (WD red), 3HDD@300Go/sas/raidz1 (Hitachi), 1SSD cache, Zlog on sas mirror
NAS2: G3220@3GHz, 3HDD@2To/raidz1 (Seagate), 1SSD cache, 1HDD@300Go/UFS
UPS: APC Back-UPS RS 900G
Case : Fractal Design XL R2

Extensions & services:
NAS1: OBI (Plex, BTSync, zrep, rclone, themes), nfs, UPS,
NAS2: OBI (zrep (backup mode), themes)

tdlmarek
NewUser
NewUser
Posts: 3
Joined: 28 Jan 2017 23:10
Status: Offline

Re: NAS4Free 11.0.0.4.3460 released (FreeBSD 11.0-RELEASE-P7)

#30

Post by tdlmarek »

I've tried Edge, Firefox and Chrome. All of the report the same issue. I don't believe it's browser related, I don't have a problem with navigation/rendering or anything like that, the connection itself fails to complete - I don't even get the password prompt.

Here is a full console debug log from Chrome:
novnc_error.jpg
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “Release Builds”