*New 11.4 series Release:
2020-07-03: XigmaNAS 11.4.0.4.7633 - released!

*New 12.1 series Release:
2020-04-17: XigmaNAS 12.1.0.4.7542 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

Posts only related to Release Builds, all others will be removed!
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
User avatar
zoon01
Developer
Developer
Posts: 796
Joined: 20 Jun 2012 21:06
Location: Netherlands
Contact:
Status: Offline

NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#1

Post by zoon01 »

warning: if you use thebrig, OBI or other stuf that use PHP, please do not upgrade until extensions are updated to support latest PHP 7.2.x or Disable those extensions before upgrade!

The NAS4Free Team is pleased to announce the release of version 11.1.0.4.5109 - Atomics

Download build 11.1.0.4.5109
Please Read always the readme_11.1 file

BUILD 11.1.0.4.5109

Changes after release 11.1.0.4.5065
===============================
- Update translations.
- WebGUI code & framework improvements.
- Add bge WOL patch. (WOL support for HP microservers)
- Upgrade devcpu-data to 1.15-1.
- Upgrade syncthing to 0.14.43.
- Upgrade sudo to 1.8.22.
- Upgrade virtualbox-ose to 5.2.6.
- Upgrade tzdata to 2018c.
- Upgrade jQuery to 3.3.1.
- Upgrade transmission to 2.93.
- Upgrade rsync to 3.1.3.
- Upgrade nano to 2.9.3.
- Upgrade php to 7.2.2.
- Upgrade bash to 4.4 patch 18.

Note:
Clear your browser's cache to avoid display issues after upgrade when coming from older release like past 11.0 series.
Make a new backup of your system configuration and store this on safe location, the system config.xml has been upgraded!

Enjoy!

Regards,
The NAS4Free Team
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz

Development system is same system in virtualbox.

sleid
PowerUser
PowerUser
Posts: 778
Joined: 23 Jun 2012 07:36
Location: FRANCE LIMOUSIN CORREZE
Status: Offline

Re: NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#2

Post by sleid »

upgrade embedded works perfectly , thanks

Edit:
send an email does not work anymore.
tls enabled
starttls disabled.
Back to version 5077 everything is working again.

I think this comes from the fact that we no longer have the option to use SSL
Last edited by sleid on 02 Feb 2018 13:29, edited 2 times in total.
12.1.0.4 - Ingva (revision 7569)
FreeBSD 12.1-RELEASE-p4 #0 r360543M: Fri May 1 21:19:01 CEST 2020
X64-embedded sur Intel(R) Atom(TM) CPU C2750 @ 2.40GHz Boot UEFI
ASRock C2750D4I 2 X 8GB DDR3 ECC
Pool of 2 vdev Raidz1: 3 x WDC WD40EFRX + 3 x WDC WD30EZRX

jamaroney
Advanced User
Advanced User
Posts: 258
Joined: 13 Aug 2012 17:32
Location: Stroudsburg, PA
Status: Offline

Re: NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#3

Post by jamaroney »

Embedded upgrade:

With new version of transmission (2.93), when I check to see if my selected port is open, I get "Error: portTested: http error 0: No Response"

Reverted back to 5065, and previous transmission (2.92) works fine, as it always did.

User avatar
ms49434
Developer
Developer
Posts: 944
Joined: 03 Sep 2015 18:49
Location: Neuenkirchen-Vörden, Germany - GMT+1
Contact:
Status: Offline

Re: NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#4

Post by ms49434 »

jamaroney wrote:
02 Feb 2018 12:27
Embedded upgrade:

With new version of transmission (2.93), when I check to see if my selected port is open, I get "Error: portTested: http error 0: No Response"

Reverted back to 5065, and previous transmission (2.92) works fine, as it always did.
Please verify that the service has been started.
Check the presence of the sysctl setting for kern.ipc.maxsockbuf to avoid buffer allocation errors.
1) XigmaNAS 12.1.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U3, 22GB out of 32GB ECC RAM, LSI 9300-8i IT mode in passthrough mode. Pool 1: 2x HGST 10TB, mirrored, L2ARC: Samsung 850 Pro; Pool 2: 1x Samsung 860 EVO 1TB, SLOG: Samsung SM883, services: Samba AD, CIFS/SMB, ftp, ctld, rsync, syncthing, zfs snapshots.
2) XigmaNAS 12.1.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U3, 8GB out of 32GB ECC RAM, IBM M1215 crossflashed, IT mode, passthrough mode, 2x HGST 10TB , services: rsync.

User avatar
ms49434
Developer
Developer
Posts: 944
Joined: 03 Sep 2015 18:49
Location: Neuenkirchen-Vörden, Germany - GMT+1
Contact:
Status: Offline

Re: NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#5

Post by ms49434 »

sleid wrote:
02 Feb 2018 09:25
upgrade embedded works perfectly , thanks

Edit:
send an email does not work anymore.
tls enabled
starttls disabled.
Back to version 5077 everything is working again.
please have a look at /var/etc/msmtp.conf, this is the configuration file for email, if you could send it via pn with sensitive information stripped/X'd.
Some changes have been applied to service msmtp with commits 5075,5077 and 5078 based on an issue reported by doktornotor in posting https://www.nas4free.org/forums/viewtop ... 956#p82919.
1) XigmaNAS 12.1.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U3, 22GB out of 32GB ECC RAM, LSI 9300-8i IT mode in passthrough mode. Pool 1: 2x HGST 10TB, mirrored, L2ARC: Samsung 850 Pro; Pool 2: 1x Samsung 860 EVO 1TB, SLOG: Samsung SM883, services: Samba AD, CIFS/SMB, ftp, ctld, rsync, syncthing, zfs snapshots.
2) XigmaNAS 12.1.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U3, 8GB out of 32GB ECC RAM, IBM M1215 crossflashed, IT mode, passthrough mode, 2x HGST 10TB , services: rsync.

User avatar
ms49434
Developer
Developer
Posts: 944
Joined: 03 Sep 2015 18:49
Location: Neuenkirchen-Vörden, Germany - GMT+1
Contact:
Status: Offline

Re: NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#6

Post by ms49434 »

ms49434 wrote:
02 Feb 2018 13:29
sleid wrote:
02 Feb 2018 09:25
upgrade embedded works perfectly , thanks

Edit:
send an email does not work anymore.
tls enabled
starttls disabled.
Back to version 5077 everything is working again.
please have a look at /var/etc/msmtp.conf, this is the configuration file for email, if you could send it via pn with sensitive information stripped/X'd.
Some changes have been applied to service msmtp with commits 5075,5077 and 5078 based on an issue reported by doktornotor in posting https://www.nas4free.org/forums/viewtop ... 956#p82919.
Fix: Please enable TLS Server Certificate Check for the time being.
Msmtp isn't really clever and complains with: cannot use tls_trust_file with tls_certcheck turned off.
1) XigmaNAS 12.1.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U3, 22GB out of 32GB ECC RAM, LSI 9300-8i IT mode in passthrough mode. Pool 1: 2x HGST 10TB, mirrored, L2ARC: Samsung 850 Pro; Pool 2: 1x Samsung 860 EVO 1TB, SLOG: Samsung SM883, services: Samba AD, CIFS/SMB, ftp, ctld, rsync, syncthing, zfs snapshots.
2) XigmaNAS 12.1.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U3, 8GB out of 32GB ECC RAM, IBM M1215 crossflashed, IT mode, passthrough mode, 2x HGST 10TB , services: rsync.

jamaroney
Advanced User
Advanced User
Posts: 258
Joined: 13 Aug 2012 17:32
Location: Stroudsburg, PA
Status: Offline

Re: NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#7

Post by jamaroney »

ms49434 wrote:
02 Feb 2018 13:11
jamaroney wrote:
02 Feb 2018 12:27
Embedded upgrade:

With new version of transmission (2.93), when I check to see if my selected port is open, I get "Error: portTested: http error 0: No Response"

Reverted back to 5065, and previous transmission (2.92) works fine, as it always did.
Please verify that the service has been started.
Check the presence of the sysctl setting for kern.ipc.maxsockbuf to avoid buffer allocation errors.
Reinstalled 5109. Transmission is definitely running, but port is again closed (indicated via transmission's WebGui)
sysctl setting for kern.ipc.maxsockbuf is the same as 5065.
Went back again to 5065 and all is OK.
Sounds to me like a bug/change in the new version of transmission, rather than a problem w/ N4F.

sleid
PowerUser
PowerUser
Posts: 778
Joined: 23 Jun 2012 07:36
Location: FRANCE LIMOUSIN CORREZE
Status: Offline

Re: NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#8

Post by sleid »

ms49434 wrote:
02 Feb 2018 15:33
ms49434 wrote:
02 Feb 2018 13:29
sleid wrote:
02 Feb 2018 09:25
upgrade embedded works perfectly , thanks

Edit:
send an email does not work anymore.
tls enabled
starttls disabled.
Back to version 5077 everything is working again.
please have a look at /var/etc/msmtp.conf, this is the configuration file for email, if you could send it via pn with sensitive information stripped/X'd.
Some changes have been applied to service msmtp with commits 5075,5077 and 5078 based on an issue reported by doktornotor in posting https://www.nas4free.org/forums/viewtop ... 956#p82919.
Fix: Please enable TLS Server Certificate Check for the time being.
Msmtp isn't really clever and complains with: cannot use tls_trust_file with tls_certcheck turned off.
Ok, that solved my problem, but I was hesitant to activate this option without a TLS certification file.
12.1.0.4 - Ingva (revision 7569)
FreeBSD 12.1-RELEASE-p4 #0 r360543M: Fri May 1 21:19:01 CEST 2020
X64-embedded sur Intel(R) Atom(TM) CPU C2750 @ 2.40GHz Boot UEFI
ASRock C2750D4I 2 X 8GB DDR3 ECC
Pool of 2 vdev Raidz1: 3 x WDC WD40EFRX + 3 x WDC WD30EZRX

scardig
NewUser
NewUser
Posts: 10
Joined: 28 Jan 2016 17:43
Status: Offline

Re: NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#9

Post by scardig »

Two problems after update:

1. Sometimes the following line appears in log 'Protocol "https" not supported or disabled in libcurl' (maybe related to a firmware version check)

2. Unable to send test mail with TLS:On and TLS Server Certificate Check:Off (no connections seen on receiving server that is operated by me). See also attached /var/etc/msmtp.conf (word in CAPS are edited for privacy). With 'TLS Server Certificate Check'=On I get ''TLS certificate verification failed: self signed certificate'' since my cert is self-signed.

account default
domain nas4free.local
host MAIL.MYDOMAIN.COM
port 465
protocol smtp
from ME@MYDOMAIN.COM
auth plain
user MYUSER
password MYPASSWORD
tls on
tls_starttls off
tls_certcheck off
tls_trust_file /usr/local/etc/ssl/cert.pem
syslog LOG_MAIL


Thanx

User avatar
ms49434
Developer
Developer
Posts: 944
Joined: 03 Sep 2015 18:49
Location: Neuenkirchen-Vörden, Germany - GMT+1
Contact:
Status: Offline

Re: NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#10

Post by ms49434 »

scardig wrote:
02 Feb 2018 17:05
Two problems after update:

1. Sometimes the following line appears in log 'Protocol "https" not supported or disabled in libcurl' (maybe related to a firmware version check)

2. Unable to send test mail with TLS:On and TLS Server Certificate Check:Off (no connections seen on receiving server that is operated by me). See also attached /var/etc/msmtp.conf (word in CAPS are edited for privacy). With 'TLS Server Certificate Check'=On I get ''TLS certificate verification failed: self signed certificate'' since my cert is self-signed.

account default
domain nas4free.local
host MAIL.MYDOMAIN.COM
port 465
protocol smtp
from ME@MYDOMAIN.COM
auth plain
user MYUSER
password MYPASSWORD
tls on
tls_starttls off
tls_certcheck off
tls_trust_file /usr/local/etc/ssl/cert.pem
syslog LOG_MAIL


Thanx
2. A bug fix has been developed, see r5111
1) XigmaNAS 12.1.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U3, 22GB out of 32GB ECC RAM, LSI 9300-8i IT mode in passthrough mode. Pool 1: 2x HGST 10TB, mirrored, L2ARC: Samsung 850 Pro; Pool 2: 1x Samsung 860 EVO 1TB, SLOG: Samsung SM883, services: Samba AD, CIFS/SMB, ftp, ctld, rsync, syncthing, zfs snapshots.
2) XigmaNAS 12.1.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U3, 8GB out of 32GB ECC RAM, IBM M1215 crossflashed, IT mode, passthrough mode, 2x HGST 10TB , services: rsync.

Victek
Starter
Starter
Posts: 45
Joined: 01 Jul 2012 20:23
Location: Barcelona - Spain
Contact:
Status: Offline

Re: NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#11

Post by Victek »

jamaroney wrote:
02 Feb 2018 15:48
ms49434 wrote:
02 Feb 2018 13:11
jamaroney wrote:
02 Feb 2018 12:27
Embedded upgrade:

With new version of transmission (2.93), when I check to see if my selected port is open, I get "Error: portTested: http error 0: No Response"

Reverted back to 5065, and previous transmission (2.92) works fine, as it always did.
Please verify that the service has been started.
Check the presence of the sysctl setting for kern.ipc.maxsockbuf to avoid buffer allocation errors.
Reinstalled 5109. Transmission is definitely running, but port is again closed (indicated via transmission's WebGui)
sysctl setting for kern.ipc.maxsockbuf is the same as 5065.
Went back again to 5065 and all is OK.
Sounds to me like a bug/change in the new version of transmission, rather than a problem w/ N4F.
Yes, port closed and when service is restarted (Services-BitTorrent-Save & Restart) I got 'Changes can't be applied. Error code 1'. Rolling back to release 5065 works as expected.
Build: XigmaNAS 12.1.0.4 (rev. 7509) amd64-embedded on Sandisk 64GB SSD. Supermicro X10SLL-F-Bios v3.2- Intel(R) Xeon(R) CPU E3-1231 v3 @ 3.40GHz - 32GB Crucial DDR3 ECC (CT102472BD160B), LSI 2008-8i IT mode, Storage: 3x Seagate Ironwolf 10TB. Raidz. Enclosure; Fractal Design R6.

xbb
NewUser
NewUser
Posts: 2
Joined: 30 Sep 2013 10:23
Status: Offline

Re: NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#12

Post by xbb »

ms49434 wrote:
02 Feb 2018 13:29
sleid wrote:
02 Feb 2018 09:25
upgrade embedded works perfectly , thanks

Edit:
send an email does not work anymore.
tls enabled
starttls disabled.
Back to version 5077 everything is working again.
please have a look at /var/etc/msmtp.conf, this is the configuration file for email, if you could send it via pn with sensitive information stripped/X'd.
Some changes have been applied to service msmtp with commits 5075,5077 and 5078 based on an issue reported by doktornotor in posting https://www.nas4free.org/forums/viewtop ... 956#p82919.
Same issue here but I resolved by setting TLS Server Certificate Check on

I think it's because the trust file, if it's set the tls certificate check must be on too

I got it working also with the check off and tls trust file set as an empty space

rth
Starter
Starter
Posts: 19
Joined: 21 Dec 2014 17:34
Status: Offline

Re: NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#13

Post by rth »

Upgrade on HP microserver worked well. (N40L with 2GB and 3*2tb zfs array + 1 4tb disc)
The bge WOL patch. (WOL support for HP microservers) seems to work correctly now. Great news as I have been waiting for this to be fixed so that I can turn on my NAS just before a scheduled backup.

totyc
NewUser
NewUser
Posts: 3
Joined: 09 Dec 2015 19:38
Status: Offline

Re: NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#14

Post by totyc »

Dear Community !

I can confirm that Transmission ( 2.93) in new n4f ( 5109) shows CLOSED PEER LISTENING PORT ( 51413) in "WEB UI / Edit preferences ... / Network / Listening Port / Peer listening port : " option. So ALL processes are in "Idle" or "Queued for download" states.
My IPS Modem / Router shows ENABLED Port forwarding on port 51413 for both UDP and TCP protocols.

UES
Starter
Starter
Posts: 27
Joined: 24 Aug 2015 09:47
Location: Bremen, Germany
Contact:
Status: Offline

Re: NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#15

Post by UES »

Same problems related to e-mail settings here. Had to set "Use TLS" and "TLS Server Certificate Check" to ON, leaving everything else empty in the Transport Layer Security (TLS) section. Looks a little bit strange when reading the annotations, but at least e-mails are up and running again.

BodgeIT
Starter
Starter
Posts: 74
Joined: 03 Jul 2012 17:39
Location: London
Status: Offline

Re: NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#16

Post by BodgeIT »

After updating NextCloud(to 13.0) "inApp" and disabling OBI, NextCloud and ExtGui in N4F UI, I attempted embedded upgrade.

All good even after re-enabling Extns! No apparent issues. Not uising email sorry, can't comment.

Thanks a bundle for all the time and effort that goes in to N4F and thanks to all those who donate that time.
NAS4Free: 11.2.0.4 - Atomics (rev: 6315) amd64-embedded
Mobo: Supermicro X9SCL-F, CPU: Xeon E3-1230v2; RAM: Crucial 32GB ECC
System: IBM M1015it SAS controller(SAS2008 v20); Intel Dual 1Gb Server Nic; Thermaltake 1KW PSU;

Storage: Raidz1(3x WD Red 3TB), Raidz1(3x WD Red 2TB), UFS(1x 0.5TB) Utility disk, ZFS Cache(64Gb SSD)

totyc
NewUser
NewUser
Posts: 3
Joined: 09 Dec 2015 19:38
Status: Offline

Re: NAS4Free 11.1.0.4.5109 released (FreeBSD 11.1-RELEASE-P6)

#17

Post by totyc »

The new 5127 release solved the Transmission misery :-)
Big Thank You for DEVELOPERS .....

Post Reply

Return to “Release Builds”