*New 12.1 series Release:
2019-11-08: XigmaNAS 12.1.0.4.7091 - released!

*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

Posts only related to Release Builds, all others will be removed!
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
User avatar
zoon01
Developer
Developer
Posts: 772
Joined: 20 Jun 2012 21:06
Location: Netherlands
Contact:
Status: Offline

XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#1

Post by zoon01 » 19 Oct 2019 01:36

We are pleased to announce the release of XigmaNAS version 11.3.0.4.7014- Parmentier.

The 11.3 series does upgrade the 11.2 series what are now soon unsupported.
We suggest to upgrade your 11.2 servers to 11.3.

First BACKUP your current Configuration!
READ readme_11.3.txt please before you do anything!

Download build 11.3.0.4.7014


Warning! Extended GUI is not compatible with this release.
Disable and remove the extension before upgrade.


Changes after release 11.3.0.4.6928
===================================
- WebGUI code & framework improvements.
- Update translations.
- Upgrade nano to 4.5.
- Upgrade proftpd to 1.3.6a.
- Upgrade arcconf to 3.02.23600.
- Upgrade sudo to 1.8.28p1.
- Upgrade virtualbox-ose to 5.2.34.

fixes:
===


Basic Note:
- Make a new backup of your system configuration and store this on safe location, the system config.xml could be upgraded!
- Clear your browser's cache to avoid display issues after upgrade when coming from older release.

Regards,
Team XigmaNAS
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.84 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz

Development system is same system in virtualbox.

provels
experienced User
experienced User
Posts: 101
Joined: 05 Jan 2014 15:31
Location: Chicago, IL, USA
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#2

Post by provels » 19 Oct 2019 02:08

Upgrade went fine here. Of course, I'll run anything! :) Thanks, all!
Peder
XigmaNAS 11.3.0.4.7014 Embedded / MiniDLNA and CIFS/SMB only
HP ProLiant DL320 G3 / P4 660 3.6GHz HT / 4GB ECC / 2 x 3TB WD Red, ZFS Mirror / APC Back-UPS BR 800

piskoraczek
NewUser
NewUser
Posts: 11
Joined: 07 Mar 2019 13:32
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#3

Post by piskoraczek » 28 Oct 2019 11:45

hmmm 11.2/3.0.4.7014? some error?


System > Firmware Update> "Latest Release: XigmaNAS-x64-embedded-11.2.0.4.7014.img.xz (Saturday October 19 01:49:43 CEST 2019)"

Soo is it 12.3 or 12.2?

User avatar
ms49434
Developer
Developer
Posts: 780
Joined: 03 Sep 2015 18:49
Location: Neuenkirchen-Vörden, Germany - GMT+1
Contact:
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#4

Post by ms49434 » 28 Oct 2019 12:04

piskoraczek wrote:
28 Oct 2019 11:45
hmmm 11.2/3.0.4.7014? some error?


System > Firmware Update> "Latest Release: XigmaNAS-x64-embedded-11.2.0.4.7014.img.xz (Saturday October 19 01:49:43 CEST 2019)"

Soo is it 12.3 or 12.2?
Releases before 7014 are not able to detect and display minor/major OS upgrades. In order to show 11.2 users the new update, the filename was changed from 11.3 to 11.2. The file itself contains the 11.3 image.
1) XigmaNAS 12.1.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U3, 22GB out of 32GB ECC RAM, LSI 9300-8i IT mode in passthrough mode. Pool 1: 2x HGST 10TB, mirrored, SLOG: Samsung 850 Pro, L2ARC: Samsung 850 Pro, Pool 2: 1x Samsung 860 EVO 1TB , services: Samba AD, CIFS/SMB, ftp, ctld, rsync, syncthing, zfs snapshots.
2) XigmaNAS 12.1.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U3, 8GB out of 32GB ECC RAM, IBM M1215 crossflashed, IT mode, passthrough mode, 2x HGST 10TB , services: rsync.

piskoraczek
NewUser
NewUser
Posts: 11
Joined: 07 Mar 2019 13:32
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#5

Post by piskoraczek » 29 Oct 2019 08:03

After update to 11.3 in ZFS information:

Code: Select all

Tue Oct 29 08:01:26 CET 2019
  pool: P1
 state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
	still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
	the pool may no longer be accessible by software that does not support
	the features. See zpool-features(7) for details.
I did in Tools>Command "zpool upgrade" but still have this status...

Code: Select all

$ zpool upgrade
This system supports ZFS pool feature flags.

All pools are formatted using feature flags.


Some supported features are not enabled on the following pools. Once a
feature is enabled the pool may become incompatible with software
that does not support the feature. See zpool-features(7) for details.

POOL  FEATURE
---------------
P1
      spacemap_v2

Uzi
Starter
Starter
Posts: 16
Joined: 14 Oct 2015 21:49
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#6

Post by Uzi » 29 Oct 2019 09:23

When upgrading you need to state the name of the pool.

In your case you'd have to enter "zpool upgrade P1" to actually do the upgrade.

piskoraczek
NewUser
NewUser
Posts: 11
Joined: 07 Mar 2019 13:32
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#7

Post by piskoraczek » 29 Oct 2019 09:32

i have forgotten. thank you. I'm sorry for this childish mistake.
BTW earlier was "Upgrade ZFS" (i think) in "ZFS Pool Tools">"Activities" but its not a problem.

Sorry, I think I have to go for coffee.

Shperrung
experienced User
experienced User
Posts: 139
Joined: 04 Apr 2018 16:29
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#8

Post by Shperrung » 29 Oct 2019 09:53

Same issue while upgrade 11.2 -> 12.0
You don't need upgrade ZFS

Code: Select all

zpool import -f P1
is what you need
11.2.0.4 - Omnius (revision 6177) embedded -> XigmaNAS 12.0.0.4.6928 RootOnZFS
ASRock J3710-ITX, LAN: Winyao 2 ports; 16Gb RAM; WD 1Tbx2, WD 2Tb; UPS Powercom WOW500U.

User avatar
gomario
experienced User
experienced User
Posts: 81
Joined: 17 Dec 2016 08:45
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#9

Post by gomario » 05 Nov 2019 17:08

Virtualbox does not copy from the old to the new :-( It must be reinstalled! If you have simulated 5 other OS'es than you are in for a nice time waste.

Bruce
Starter
Starter
Posts: 26
Joined: 06 Mar 2017 14:39
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#10

Post by Bruce » 08 Dec 2019 07:08

I found "Upgrade note to "Full" RootOnZFS Platform users
===============================================
Users upgrading RootOnZFS from a revision lower than 6625, please go to: "Tools > Execute Command" and execute the below command"
in readme.txt.
MY one of NAS just running at '' 11.2.0.4 - Omnius ( 6625)', should i execute command?

Bruce
Starter
Starter
Posts: 26
Joined: 06 Mar 2017 14:39
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#11

Post by Bruce » 08 Dec 2019 08:07

After “zpool upgrade zroot”,should i update boot code "gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 da0"

Code: Select all

nas4platform: ~# zpool upgrade zroot
This system supports ZFS pool feature flags.

Enabled the following features on 'zroot':
  device_removal
  obsolete_counts
  zpool_checkpoint
  spacemap_v2

If you boot from pool 'zroot', don't forget to update boot code.
Assuming you use GPT partitioning and da0 is your boot disk
the following command will do it:

        gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 da0

Bruce
Starter
Starter
Posts: 26
Joined: 06 Mar 2017 14:39
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#12

Post by Bruce » 08 Dec 2019 08:09

Code: Select all

~# gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 da0
gpart: No such geom: da0.
what can i do? Help!

User avatar
JoseMR
Hardware & Software Guru
Hardware & Software Guru
Posts: 1287
Joined: 16 Apr 2014 04:15
Location: PR
Contact:
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#13

Post by JoseMR » 08 Dec 2019 08:19

Bruce wrote:
08 Dec 2019 08:07
After “zpool upgrade zroot”,should i update boot code "gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 da0"

Code: Select all

nas4platform: ~# zpool upgrade zroot
This system supports ZFS pool feature flags.

Enabled the following features on 'zroot':
  device_removal
  obsolete_counts
  zpool_checkpoint
  spacemap_v2

If you boot from pool 'zroot', don't forget to update boot code.
Assuming you use GPT partitioning and da0 is your boot disk
the following command will do it:

        gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 da0

Hello, User running RootOnZFS 11.2 or below need to update the rc.firmware as a workaround to avoid a reinstall, this is before XigmaNAS RootOnZFS changes to follow standard FreeBSD bsdinstall installation practices for convenience and Boot Environments portability.

To upgrade to latest 11.3 user need to execute this command:

Code: Select all

fetch --no-verify-peer -o /etc/rc.firmware "https://sourceforge.net/p/xigmanas/code/HEAD/tree/branches/11.3.0.4/etc/rc.firmware?format=raw"
To upgrade to latest 12.x, user need to execute this command:

Code: Select all

fetch --no-verify-peer -o /etc/rc.firmware "https://sourceforge.net/p/xigmanas/code/HEAD/tree/trunk/etc/rc.firmware?format=raw"
Users running latest 11.3/12.1 no longer need to worry about this procedure since XirmaNAS RootOnZFS install process is the same as the bsdinstall as previously denoted.

As for upgrade ZFS feature flags in the RootOnZFS, I believe there is no need to update the bootcode but if you can wait few mins as for this post, I can confirm it for you.

Regards
System: FreeBSD 12 RootOnZFS Mirror, MB: Supermicro X8SI6-F, Xeon X3450, 16GB DDR3 ECC RDIMMs.
XigmaNAS RootOnZFS
Addons at GitHub
BastilleBSD
Boot Environments Intro
JoseMRPubServ(temporary down)

User avatar
JoseMR
Hardware & Software Guru
Hardware & Software Guru
Posts: 1287
Joined: 16 Apr 2014 04:15
Location: PR
Contact:
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#14

Post by JoseMR » 08 Dec 2019 08:22

Bruce wrote:
08 Dec 2019 08:09

Code: Select all

~# gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 da0
gpart: No such geom: da0.
what can i do? Help!

You are really brave :shock: :lol: .

Let me confirm this for you and don't try to do anything that may kill your system boot, just wait a bit, ZFS upgrade is not mandatory and remember once upgraded a roll back to previous version may requires a reinstall then import back said Boot Environments if you created a BE backup though.

Regards
System: FreeBSD 12 RootOnZFS Mirror, MB: Supermicro X8SI6-F, Xeon X3450, 16GB DDR3 ECC RDIMMs.
XigmaNAS RootOnZFS
Addons at GitHub
BastilleBSD
Boot Environments Intro
JoseMRPubServ(temporary down)

User avatar
JoseMR
Hardware & Software Guru
Hardware & Software Guru
Posts: 1287
Joined: 16 Apr 2014 04:15
Location: PR
Contact:
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#15

Post by JoseMR » 08 Dec 2019 08:42

Hello, here is the confirmation on upgrading zroot pool to the latest feature flags:

I've upgraded a RootOnZFS system from 11.1.0.4 - Atomics (revision 5403) to the latest XigmaNAS 12.1.0.4 as well as upgraded the the zroot pool to support the latest feature flags.

The above process does not affect the standard XigmaNAS RootOnZFS boot progress due its GPT partitioning scheme.

EDIT: I should add that XigmaNAS running on MBR partitioning is not affected by the latest ZFS feature flags upgrade.

So is all fine. ;)

Regards.
System: FreeBSD 12 RootOnZFS Mirror, MB: Supermicro X8SI6-F, Xeon X3450, 16GB DDR3 ECC RDIMMs.
XigmaNAS RootOnZFS
Addons at GitHub
BastilleBSD
Boot Environments Intro
JoseMRPubServ(temporary down)

Bruce
Starter
Starter
Posts: 26
Joined: 06 Mar 2017 14:39
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#16

Post by Bruce » 08 Dec 2019 08:44

Now my system boot already be killed? so I just do noting?just waiting?
You do not have the required permissions to view the files attached to this post.

User avatar
JoseMR
Hardware & Software Guru
Hardware & Software Guru
Posts: 1287
Joined: 16 Apr 2014 04:15
Location: PR
Contact:
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#17

Post by JoseMR » 08 Dec 2019 08:50

Bruce wrote:
08 Dec 2019 08:44
Now my system boot already be killed? so I just do noting?just waiting?
Hello, your system should be fine, just reboot and verify, however never ever again just execute any command from any system/zfs warning messages if you don't know what you are really doing, even less if this is a production machine.

P.S the ZFS Warning message on write the bootcode after upgrading to latest feature flags is plain a generic/informative message and most likely mainly for legacy MBR boot schemes and/or for ZFS using whole RAW disks.

Regard
System: FreeBSD 12 RootOnZFS Mirror, MB: Supermicro X8SI6-F, Xeon X3450, 16GB DDR3 ECC RDIMMs.
XigmaNAS RootOnZFS
Addons at GitHub
BastilleBSD
Boot Environments Intro
JoseMRPubServ(temporary down)

Bruce
Starter
Starter
Posts: 26
Joined: 06 Mar 2017 14:39
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#18

Post by Bruce » 08 Dec 2019 09:13

Thanks a lot!! :oops: :oops:
System is reboot fine. I really rember this "never ever again just execute any command from any system/zfs warning messages if you don't know what you are really doing"
By the way, I want to "zpool add" today. I want to add "Eric" to "WD".

Code: Select all

zpool list
NAME    SIZE  ALLOC   FREE  CKPOINT  EXPANDSZ   FRAG    CAP  DEDUP  HEALTH  ALTR                  OOT
Eric    464G   185G   279G        -         -     0%    39%  1.00x  ONLINE  -
WD      928G   707G   221G        -         -     5%    76%  1.00x  ONLINE  -
zroot   286G   179G   107G        -         -    33%    62%  1.00x  ONLINE  -
Should i running

Code: Select all

zpool add -n WD Eric
. If it work , I will running

Code: Select all

zpool add WD Eric
.
If "Eric" add to "WD", all data in "Eric" will be missing?

User avatar
JoseMR
Hardware & Software Guru
Hardware & Software Guru
Posts: 1287
Joined: 16 Apr 2014 04:15
Location: PR
Contact:
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#19

Post by JoseMR » 08 Dec 2019 09:34

Bruce wrote:
08 Dec 2019 09:13
Thanks a lot!! :oops: :oops:
System is reboot fine. I really rember this "never ever again just execute any command from any system/zfs warning messages if you don't know what you are really doing"
By the way, I want to "zpool add" today. I want to add "Eric" to "WD".

Code: Select all

zpool list
NAME    SIZE  ALLOC   FREE  CKPOINT  EXPANDSZ   FRAG    CAP  DEDUP  HEALTH  ALTR                  OOT
Eric    464G   185G   279G        -         -     0%    39%  1.00x  ONLINE  -
WD      928G   707G   221G        -         -     5%    76%  1.00x  ONLINE  -
zroot   286G   179G   107G        -         -    33%    62%  1.00x  ONLINE  -
Should i running

Code: Select all

zpool add -n WD Eric
. If it work , I will running

Code: Select all

zpool add WD Eric
.
If "Eric" add to "WD", all data in "Eric" will be missing?

Hello, you can't simply add/merge ZFS disks like that, note that both disk above(Eric and WD) have DATA already there, plus this disks are not the same, one looks like a 500GB and the other appears to be an 1TB disk, so adding this drives to a vdev will truncate the largest one(1TB) to 500GB which is the smallest disk, so this is a less than ideal scenario/bad practice.

If all you want to do is like JBOD the disk to appears like a one big 1TB+500GB, ZFS don't work this way, plus is very risky move if it can either way.

Note: Trying to force to do this regardless will cause permanent DATA lost.

Regards
System: FreeBSD 12 RootOnZFS Mirror, MB: Supermicro X8SI6-F, Xeon X3450, 16GB DDR3 ECC RDIMMs.
XigmaNAS RootOnZFS
Addons at GitHub
BastilleBSD
Boot Environments Intro
JoseMRPubServ(temporary down)

Bruce
Starter
Starter
Posts: 26
Joined: 06 Mar 2017 14:39
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#20

Post by Bruce » 08 Dec 2019 09:45

Thanks again!

gimeumeu
NewUser
NewUser
Posts: 5
Joined: 11 Apr 2018 10:37
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#21

Post by gimeumeu » 14 Dec 2019 21:24

Hi
I upgrade from 11.2 series to 11.3 series.
Two services fails to start : nmdb and smdb.
Can I have some help for this ?
Tanks

PS my logs :
You do not have the required permissions to view the files attached to this post.
11.2.0.4 - Omnius (revision 5774) FreeBSD 11.2-RELEASE #0 r336868M: Sun Jul 29 15:48:17 CEST 2018

bjs
Starter
Starter
Posts: 26
Joined: 08 Mar 2019 12:58
Location: Virginia, USA
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#22

Post by bjs » 15 Dec 2019 14:47

Looks very similar to this problem... Might want to see if you can use the same fix...
XigmaNAS 11.2.0.4 - Omnius RootOnZFS/MBR - HP M700 120GB SSDs
x64-full on Intel Core2 Quad CPU Q9300 @ 2.50GHz - 8GB RAM
Intel DG33FB Motherboard - LSI 9211-8i with 8TB available

nasser
Starter
Starter
Posts: 46
Joined: 01 May 2017 21:00
Status: Offline

Re: XigmaNAS 11.3.0.4.7014 released (FreeBSD 11.3-RELEASE-P3)

#23

Post by nasser » 30 Dec 2019 18:51

Hello!

do I need update the bootcode on partition 1 (efiboot) oder 2 (sysboot0) or is it no problem just update both?

gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 ada3

=> 40 234441568 ada3 GPT (112G)
40 409600 1 efiboot0 (200M)
409640 1024 2 sysboot0 (512K)
410664 7128 - free - (3.5M)
417792 12582912 3 swap0 (6.0G)
13000704 25165824 4 sysdisk0 (12G)
38166528 16777216 5 ssdlog0 (8.0G)
54943744 179497864 6 ssdcache0 (86G)

...and how to remove the bootcode from a partition, because I wrote it on both? ;)

Post Reply

Return to “Release Builds”