*New 11.4 series Release:
2020-07-03: XigmaNAS 11.4.0.4.7633 - released!

*New 12.1 series Release:
2020-04-17: XigmaNAS 12.1.0.4.7542 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

NAS4Free 9.3.0.2.1955 Released (FreeBSD 9.3-RELEASE-P28)

Posts only related to Release Builds, all others will be removed!
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
User avatar
zoon01
Developer
Developer
Posts: 799
Joined: 20 Jun 2012 21:06
Location: Netherlands
Contact:
Status: Offline

NAS4Free 9.3.0.2.1955 Released (FreeBSD 9.3-RELEASE-P28)

#1

Post by zoon01 »

The nas4free team has just released maintenance release 9.3.0.2.1955 to SF.

http://sourceforge.net/projects/nas4fre ... .0.2.1955/

NAS4Free Upgrade below 9.3.0.2.1310 is NOT possible!!!
======================================================

Upgrading NAS4Free "Embedded" or "Full" from any version below 9.3.0.2.1310 by webgui or from
LiveCD/USB is problematic, due a new size of boot partition & partition layout.
Please download and save your NAS4Free config to a safe place and backup all files from second
partition if you use boot disk as data disk.
INSTALL FROM SCRATCH IS THE ONLY WAY!
After installation you can restore your config.
Sorry for inconvenience.
! Tools to write extracted embedded file are not longer supported !
Use the liveusb/CD than.


Requirements
============
Embedded: 2GB CF/USB/SSD (NAS4free "Embedded" is Recommended Install)
Full: 4GB HDD/SSD (For developers and some advanced users, Not Recommended!)
Swap less: physical memory 2GB or higher needed.
With swap: physical memory 512MB + swap 512MB (swap 1024MB recommended).

*Note: LiveCD is not supported on swap mode except installation and upgrading.

BUILD 9.3.0.2.1391
=================
Changes:
- Upgrade to FreeBSD 9.3 RELEASE p28.
- Upgrade to Samba4.1 and add SMB3 in WebGUI.
- Convert to pkgng.
- Ability to backup and restore the encrypted configuration.
- Installation of system with GPT partition. (experimental)
- Improved WebGUI under PHP 5.6.
- Improved WebGUI with Chrome.
- Improved config restore verbose output.
- Improved ZFS pool usage/tool and import ZFS disks.
- Improved ZFS pool import on embedded.
- Improved HAST switch with net.inet.carp.preempt.
- Improved PHP session handle.
- Improved swap setting.
- Replaced /dev/md0 with xmd using LZ4 compression.
- Replaced the server certificate with 2048bits key and sha256 signature.
- Change iperf2.x for iperf3.
- Changed samba reload when changing the shares. (it takes few secs.)
- Changed rootfs layout. (2GB USB/CF is required. Full is 4GB or more.)
- Changed image files to use XZ.
- Changed net.inet.tcp.delayed_ack to 1.
- Changed boot with advskew=240 on master node. ("Switch VIP to MASTER" button will change the value)
- Changed default Map to guest in CIFS/SMB is enabled.
- Changed SMB send/recv buffer to 128480.
- Drop SSLv3 support. (HTTPS must use TLS)
- Drop LiveCD mode support with less than 2GB memory. (install/upgrade only)
Supported minimum spec except LiveCD is 512MB memory + 512MB swap device or partition.
1024MB swap device or partition is recommended.
File based swap and ZFS volume swap is not recommended.
- Add ext2/ext3/ext4 detection when importing disk.
- Add NFS v4 support.
- Add tcpdump.
- Add hostapd support. (wireless AP mode)
- Add WLAN virtual interface used for wireless device. (OPT only at this time)
- Add WebGUI access restriction.
- Add NFS support in HAST service.
- Add default swap of 512MB for LiveUSB and before user configuration.
- Adjust number of Status|Processes.
- Add MBR partition to LiveUSB.
- Add log/mirrored log support in Disks|ZFS|Pools|Tools.
- Add expires HTTP header. (some js must be force reloaded.)
- Add 10.1 bge driver & NAS4Free bge wol patch.
- Increase http upload size to 512MB.
- Remove last slash of the path added by filechooser.
- Add wait_on and spindown.
- Upgrade e2fsprogs to 1.42.12.
- Upgrade transmission to 2.84.
- Upgrade isboot to 0.2.8.
- Upgrade istgt to 20141125.
- Upgrade smartmontools 6.3
- Upgrade xmlstarlet to 1.6.1.
- Upgrade mDNSResponder to 561.1.1.
- Upgrade xmd to 0.4.4.
- Upgrade unison to 2.48.3.
- Upgrade netatalk to 3.1.7.
- Upgrade iperf3 to 3.0.11.
- Upgrade inadyn-mt to 02.24.44.
- Upgrade sipcalc to 1.1.6.
- Upgrade rsync to 3.1.1.
- Upgrade mDNSResponder to 567.
- Upgrade msmtp to 1.6.2.
- Upgrade proftpd to 1.3.5a.
- Upgrade smartmontools to 6.4.
- Upgrade nano to 2.4.2.
- Upgrade tzdata to 2015g.
- Upgrade php to 5.6.14.
- Upgrade bash 4.3 to patch 42.
- Upgrade samba to 4.1.21.

Fixes:
- Cannot install to Toshiba drive.
- Missing libftdi in lcdproc.
- Newly created AFP share is not shown in Time Machine.
- Pool state on index.php is not a live state.
- Cannot mount(readonly) ext2/ext3/ext4 on GPT.
- Remove ZFS pool cache in ZFS pool tools and sync.
- FAT/NTFS mount does not use access restriction.
- Broken Wireless support.
- ZFS pool cache is not removed when deleting or reseting to factory default.
- Missing /etc/uams/uams_randnum.so
- Missing nutdrv_atcl_usb nut driver.
- Never reject SMB3 and sendfile combination.
- Failed to mount NTFS with read-only.
- Missing mount_fusefs in /usr/local/sbin.
- Missing usb device configuration file.
- Missing default pkg repository.
- mount_ntfs is not installed to /sbin.
- Wrong variable in HAST script.
- /boot/kernel/fuse.ko is missing.
- /etc/platform is broken on full installation.
- Some DHCP setting of WebGUI does not work.
- xmlrpc is broken.
- Missing GPT partition in Disks|ZFS|Pools|Tools.
- Switching DHCP and static IP cause unexpected behavior.
- Some drives can't get disk model/description.
- The text on graph is not sized on Chrome.
- Firmware page show incorrectly.
- ntfs-3g is broken.
- Form size is too small on Chrome.
- HAST device is not imported by import disks.
- Stop flooding "Unknown USB device" to syslog.CIFS/SMB
- Fix ssh logins

========
Authentication has changed
Only Local User or Active Directory can be selected.
Anonymous access has been dropped!

Improved security WebGUI access
=============================
When you have WebGUI Login error 403?
Make shure the pc is in the same network!
by default the System|General Setup Hosts allow field is empty so any one on
the same network of LAN interface can access the WebGUI allowed.
With a space delimited set of IP or CIDR notation you can add computers from outer network.
As an example the outer IP address and LAN address for remote access.

Experimental memory disk (geom_xmd.ko)
=====================================
This version contains a special memory disk driver called "xmd".
The following are the main features.

- on-demand memory allocation and de-allocation (zero fill/TRIM support)
- on-the-fly block level compression
- multiple compression methods and levels (none, LZ4/LZ4HC, ZLIB, LZMA2)
- mixed compressed blocks (can be changed at any time by xmdconfig)
- pre-compressed mfsroot by mkuzip(8) or mkulzma(8)
- provide the ioctl interface for the xmdconfig utility like mdconfig(8)

Regards,
The NAS4Free Team
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz

Development system is same system in virtualbox.

User avatar
ernie
Forum Moderator
Forum Moderator
Posts: 1453
Joined: 26 Aug 2012 19:09
Location: France - Val d'Oise
Status: Offline

Re: NAS4Free 9.3.0.2.1955 Released (FreeBSD 9.3-RELEASE-P28)

#2

Post by ernie »

Hello,

My upgrade was fine : from 9.3.1391 with TheBrig, ezPlex, phpVbox, RRDgraph, EGui, Btsync, UPS.

I managed it via the webgui.

Thanks for the work.
NAS 1&2:
System: GA-6LXGH(BIOS: R01 04/30/2014) / 16 Go ECC
XigmaNAS 12.1.0.4 - Ingva (revision 7542) embedded
NAS1: Xeon E3 1241@3.5GHz, 4HDD@2To/raidz2 (WD red), 3HDD@300Go/sas/raidz1 (Hitachi), 1SSD cache, Zlog on sas mirror
NAS2: G3220@3GHz, 3HDD@2To/raidz1 (Seagate), 1SSD cache, 1HDD@300Go/UFS
UPS: APC Back-UPS RS 900G
Case : Fractal Design XL R2

Extensions & services:
NAS1: OBI (Plex, BTSync, zrep, rclone, themes), nfs, UPS,
NAS2: OBI (zrep (backup mode), themes)

User avatar
ernie
Forum Moderator
Forum Moderator
Posts: 1453
Joined: 26 Aug 2012 19:09
Location: France - Val d'Oise
Status: Offline

Re: NAS4Free 9.3.0.2.1955 Released (FreeBSD 9.3-RELEASE-P28)

#3

Post by ernie »

Now I upgraded the NAS2.

The upgrade worked but the nas was setup with factory parameters :(

I think that it comes from the fact that the nas interface is in french and not english as nas1.

I upload the configuration and it is fine now.

One small issue: remote host identification is broken. I need to update it.
NAS 1&2:
System: GA-6LXGH(BIOS: R01 04/30/2014) / 16 Go ECC
XigmaNAS 12.1.0.4 - Ingva (revision 7542) embedded
NAS1: Xeon E3 1241@3.5GHz, 4HDD@2To/raidz2 (WD red), 3HDD@300Go/sas/raidz1 (Hitachi), 1SSD cache, Zlog on sas mirror
NAS2: G3220@3GHz, 3HDD@2To/raidz1 (Seagate), 1SSD cache, 1HDD@300Go/UFS
UPS: APC Back-UPS RS 900G
Case : Fractal Design XL R2

Extensions & services:
NAS1: OBI (Plex, BTSync, zrep, rclone, themes), nfs, UPS,
NAS2: OBI (zrep (backup mode), themes)

User avatar
lux
Advanced User
Advanced User
Posts: 201
Joined: 23 Jun 2012 11:37
Location: Bielefeld, Germany
Contact:
Status: Offline

Re: NAS4Free 9.3.0.2.1955 Released (FreeBSD 9.3-RELEASE-P28)

#4

Post by lux »

upgraded Office NAS without any Probs!

Thx to the Dev's!!
Home:11.3.x.7014/emb@32GB USB|1270v2@X9SCA-F|ECC32GB|i340-T4[lagg@GS108Tv2&smb-mch]|M1015@IT|9HDD~40TB@3xRaidZ1+1HDD+2SSD i335&i520+1xi800P@ZIL|~44W idle@SS-400FL2|Nanoxia Deep Silence 6B|24/7
Services: CIFS, FTP, TFTP, SSH, NFS, Rsync, Syncthing, Webserver, BitTorrent, VirtualBox | Extensions: OBI, TheBrig[certbot, Asterisk] | Extensions via vBox: Pi-hole & Jellyfin @DebianVM's
Test:12.x/emb@16GB USB|X3 420e@M4A88TD-V|16GB|i350-T2|M1015@IT|8xHDD+3xSSD[different Size&Brand]RaidZ1+2|for TESTing only

C6Blois
NewUser
NewUser
Posts: 1
Joined: 23 Feb 2015 21:04
Status: Offline

Re: NAS4Free 9.3.0.2.1955 Released (FreeBSD 9.3-RELEASE-P28)

#5

Post by C6Blois »

Is it possible to get a working download link for the embedded upgrade file for 9.3.0.2 1955? It is no longer available on the SourceForge site.

User avatar
raulfg3
Site Admin
Site Admin
Posts: 5119
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: NAS4Free 9.3.0.2.1955 Released (FreeBSD 9.3-RELEASE-P28)

#6

Post by raulfg3 »

This is because NAS4Free 9.3.0.2 Series are End Of Life!.

Please try 10.x series
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

HP T510

onega23
Starter
Starter
Posts: 16
Joined: 11 Apr 2014 14:48
Status: Offline

Re: NAS4Free 9.3.0.2.1955 Released (FreeBSD 9.3-RELEASE-P28)

#7

Post by onega23 »

This is because NAS4Free 9.3.0.2 Series are End Of Life!.
Please try 10.x series
version 9.3.0.2 , 5-10 times more fast, in some tasks (network file databases)
version 9.3.0.2 - very stable without netbios support (ip connections to server).

all 10.x versions - very slow for me.

tests result:
viewtopic.php?f=21&t=11621

Post Reply

Return to “Release Builds”