*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released

*New 12.0 series Release:
2019-10-05: XigmaNAS 12.0.0.4.6928 - released!

*New 11.2 series Release:
2019-09-23: XigmaNAS 11.2.0.4.6881 - released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

tvheadend / finch on XigmaNAS

Jails with XigmaNAS
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
drnicolas
Advanced User
Advanced User
Posts: 182
Joined: 15 Aug 2013 14:03
Location: Wiesbaden, Germany
Status: Offline

tvheadend / finch on XigmaNAS

#1

Post by drnicolas » 09 Apr 2019 09:40

My goal is to run tvheadend on xigmaNAS.

For this I already installed finch on my xigmanas-machine.
For me, it look like an successful installation. at least finch refresh went fine after a reboot and it also looks fine with only finch.

Next step seems to be the real installation process and also a preparation for finch.

My first question is about the "jail-ip-addfress" which I do not understand fully.

My network has 192.168.1.xx ip-addresses, Xigma-NAS has a fixed IP 192.168.1.252.
All IP-Addresses come from a DHCP in the range 192.168.1.10-90.

What IP should I choose?
Is this the IP where my tvheadend should be reachable later on?
HP Proliant N54L - Bios Mod -16GB non-ECC-RAM - ZFS RAIDZ1 (3x3TB) - 1VM running XigmaNAS 11.2.0.4.6026

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4925
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: tvheadend / finch on XigmaNAS

#2

Post by raulfg3 » 09 Apr 2019 09:46

sorry one first question:

why use finch instead thebrig?

both are jail managers, but thebrig have better forum support
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

drnicolas
Advanced User
Advanced User
Posts: 182
Joined: 15 Aug 2013 14:03
Location: Wiesbaden, Germany
Status: Offline

Re: tvheadend / finch on XigmaNAS

#3

Post by drnicolas » 09 Apr 2019 09:49

Good question.
On the way "how to install tvheadend on FreeNAS/XigmaNAS", I had to learn that a direct install is not possible.
To be honest: I found a few posts about tvheadend and finch but AFAIK nothing about tvheadend/the brig.

Of course, I am open to any working solution!
HP Proliant N54L - Bios Mod -16GB non-ECC-RAM - ZFS RAIDZ1 (3x3TB) - 1VM running XigmaNAS 11.2.0.4.6026

Post Reply

Return to “Jails”