uniss wrote: ↑
04 Feb 2017 19:50
For a while, not looking into the NAS, and now came the day of trouble.
My dual-core AMD Turion II Neo N40L no longer cope with the load. It looks like this (22.214.171.124.3305 + EGUI 0.6):
2017-02-04 126.96.36.199 3305 06.png
On the system always runs bittorrent and finch chroot with plex. I think that is a very small load for 2x1.5GHz processor.
And there was my question. What is the reason? I do not remember that this happened even in the summer. I have a screenshot created 23 July. Here it is (10.3.0.3.2898 + EGUI 0.5.3):
2016-07-24 10.3.0.3 2898 053.png
At the same time, I noticed that the CPU is hotter than in the summer (because it shows a pair of graphs on the main screen instead of hidden monitoring window?). July 23, 2016 the day was 22 degrees, and the processor was 44 degrees, today in the apartment - 23, on processor - 47.
After checking a few firmware (3305,3330,3460) and disable the services, I found that the reason for this load - Extended GUI. As soon as I switch it to Standard mode - miracle is happens.
188.8.131.52.3305 + EGUI 0.6 when switching to standard mode
2017-02-04 3305 switch to standard.png
184.108.40.206.3305 + EGUI 0.6 after switching to standard mode
2017-02-04 3305 standard.png
220.127.116.11.3460 + EGUI 0.6.1-beta1 Extended mode on, bittorrent off
2017-02-04 3460 061b ext on.png
18.104.22.168.3460 + EGUI 0.6.1-beta1 Extended mode on, bittorrent on
2017-02-04 3460 061b ext on trans on.png
At a glance - in all cases you have high network upload values (except for the case "22.214.171.124.3460 + EGUI 0.6.1-beta1 Extended mode on, bittorrent off
") so this lets me assume that there is bittorrent involved - and maybe also Plex updates anyhow - eGUI by itself don't creates high traffic load on the network.
Pls can you check
- in System > Processes over an amount of time which processes are consuming high WCPU / Time values
- the value of System Calls Service Delay Time in Extensions > Extended GUI, maybe you set it to a very low value (standard is 60 seconds)
- if you have enabled Hosts monitoring in Extensions > Extended GUI => if yes than every nn seconds, which you setup in System Calls Service Delay Time, the network part will be pinged, but there is no continuously traffic created by eGUI!
Really it is necessary to change the processor or stay on 0.5.3? Or is the problem of optimizing the code?
No, no need for a processor upgrade ...
In general I did code optimization for eGUI long time ago, that was the reason for introducing the System Calls Service Delay Time
which means that new values are gathered every nn seconds which you can setup there rather to retrieve all values every 5 seconds like the original Status > System page does - but anyway I could have missed something ...
uniss wrote: ↑
05 Feb 2017 14:14
And while waiting for your answer, I gathered my version)))
By the way, as I wrote earlier, I have not displayed 'CPU Temperature', ie code in a standard file 'index.php' does not work
Code: Select all
If I remove the conditions, it will be displayed only empty cell with no value.
Hold on - you have got the CPU temperature display in your screenshot
In r3460 there was a new layout introduced which merges the multicore CPU load and temperature values into one row/section.
Just for single core CPUs there is one row for the CPU temperature ... which is not your case.