*New 12.1 series Release:
2020-07-21: XigmaNAS 12.1.0.4.7683 - released

*New 11.4 series Release:
2020-07-20: XigmaNAS 11.4.0.4.7682 - released!


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

NAS4Free 11.0.0.4.4009 released (FreeBSD 11.0-RELEASE-P8)

Posts only related to Release Builds, all others will be removed!
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
User avatar
zoon01
Developer
Developer
Posts: 805
Joined: 20 Jun 2012 21:06
Location: Netherlands
Contact:
Status: Offline

NAS4Free 11.0.0.4.4009 released (FreeBSD 11.0-RELEASE-P8)

#1

Post by zoon01 »

The NAS4Free Team is pleased to announce a maintenance release of version 11.0.0.4.4009 - Sayyadina

download build 11.0.0.4.4009
Read the readme_11.0

Because of PHP upgrade and its related code changes: extensions like Extended GUI are not compatible!
Extensions should be disabled before and after upgrades until their creators have updated it's sources.
As we do not create/test those plugins against compatibility, we do not know if more OBI installer plugins are broken!
We are sorry.


Major Change!
Note for 32-bits users:
===================
We believe that the use of 32-bits versions can not give the end users it's full potential of the OS, for this
further development on the (i386) 32-bits architecture has been stopped upon the 11.0.0.3.xxxx series.
Current 32-bits users are able to use 32-bits 10.3.0.3.xxxx series until their end of life or do reinstall
to use 64-bits NAS4Free and restore config.

Again TIP: Do not upgrade from 10 series directly!
reinstall and restore config is the way to go because of increased partition size!
You avoid lots of problems later on.

Upgrade note:
=============
RRDGraphs extension can no longer be used with 11.x series, disable and deinstall before upgrade!
RRDGraphs are now included in 11.x series, you can setup on webgui System > Advanced > Monitoring Setup.
Do not reinstall the extension!!!

BUILD 11.0.0.4.4009

Changes after release 11.0.0.4.3958
===================================
- Update translations.
- Upgrade tzdata to 2017a.
- Upgrade iperf to 3.1.7.
- Upgrade syncthing to 0.14.24.
- Add disk capacity formatting.
- Add in page refresh for FTP diagnostics.
- Add HDD Management new framework.
- Add option to shrink header in a session.
- Add option to stop scanning for extension menus.
- Performance improvement by caching header menu.
- Full rewrite of header menu and extension menu scanner.
- Update web links.

Bug Fixes
========
- Fix illegal string offsets.
- Fix spinner spins after weblink usage.

Known bugs:
===========
- IE11 and Edge browser does not operate correctly with novnc. Enter & Escape button problematic,
this will be fixed at a later release, use Chrome or other browser or connect with putty client.

Enjoy!

Regards,
The NAS4Free Team
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz

Development system is same system in virtualbox.

GDixon
Starter
Starter
Posts: 19
Joined: 03 Dec 2015 06:00
Status: Offline

Re: NAS4Free 11.0.0.4.4009 released (FreeBSD 11.0-RELEASE-P8)

#2

Post by GDixon »

Used embedded and it is running very well. Installed, rebooted and came up using the old config.
No problems as of yet!

Greg

Victek
Starter
Starter
Posts: 47
Joined: 01 Jul 2012 20:23
Location: Barcelona - Spain
Contact:
Status: Offline

Re: NAS4Free 11.0.0.4.4009 released (FreeBSD 11.0-RELEASE-P8)

#3

Post by Victek »

Thank you very much for the new version, smooth upd and running!.
Build: XigmaNAS 12.1.0.4 (rev. 7683) amd64-embedded on Sandisk 64GB SSD. Supermicro X10SLL-F-Bios v3.2- Intel(R) Xeon(R) CPU E3-1231 v3 @ 3.40GHz - 32GB Crucial DDR3 ECC (CT102472BD160B), LSI 2008-8i IT mode, Storage: 3x Seagate Ironwolf 10TB. Raidz. Enclosure; Fractal Design R6.

nef
Starter
Starter
Posts: 25
Joined: 13 Dec 2015 18:40
Status: Offline

Re: NAS4Free 11.0.0.4.4009 released (FreeBSD 11.0-RELEASE-P8)

#4

Post by nef »

Hi!
New extension scanner is not working that great. I was upgrading from 3940, I had the Brig installed, and now "Extensions" are not visible at menu bar anymore. However, the jails are still running ;).
System specs: XigmaNAS embedded on USB / MB: AsRock Rack C236 WSI / CPU: E3-1235L v5 @ 2.0GHz / RAM: 32GB Kingston DDR4 2133mhz ECC / Case: U-NAS NSC-800 / Storage: 8x Western Digital Red (WD30EFRX) raidz2 / 120GB L2ARC MP500 / Mellanox ConnectX-3

wtgraham1
NewUser
NewUser
Posts: 2
Joined: 09 Dec 2016 18:13
Status: Offline

Re: NAS4Free 11.0.0.4.4009 released (FreeBSD 11.0-RELEASE-P8)

#5

Post by wtgraham1 »

Hello,
Just upgrade and everytime I load add drive and change the ip from the default and same my new setting. It alwas goes back to the factory default

User avatar
raulfg3
Site Admin
Site Admin
Posts: 5143
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: NAS4Free 11.0.0.4.4009 released (FreeBSD 11.0-RELEASE-P8)

#6

Post by raulfg3 »

wtgraham1 wrote:
10 Mar 2017 00:21
Hello,
Just upgrade and everytime I load add drive and change the ip from the default and same my new setting. It alwas goes back to the factory default
probably you use live version and not a embeded or full, post your N4F info like this:

1.jpg

PD: Perhaps your liveCD/USB is still in use?
You do not have the required permissions to view the files attached to this post.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

HP T510

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 552
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: NAS4Free 11.0.0.4.4009 released (FreeBSD 11.0-RELEASE-P8)

#7

Post by crest »

Hello nef,

nef wrote:
09 Mar 2017 23:05
Hi!
New extension scanner is not working that great. I was upgrading from 3940, I had the Brig installed, and now "Extensions" are not visible at menu bar anymore. However, the jails are still running ;).

As a workaround call

Code: Select all

http://YourNASIP/extensions_thebrig.php
in your web browser to get the extensions landing page, but keep in mind that TheBrig is not yet PHP 7.1 aware, so expect (maybe) faults in regard of this! See also here => viewtopic.php?p=76190#p76190

Best regards
crest
NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM
UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone, Themes:

wtgraham1
NewUser
NewUser
Posts: 2
Joined: 09 Dec 2016 18:13
Status: Offline

Re: NAS4Free 11.0.0.4.4009 released (FreeBSD 11.0-RELEASE-P8)

#8

Post by wtgraham1 »

thanks for reply and yes I used the liveUSB version. I will use the embedded version

nef
Starter
Starter
Posts: 25
Joined: 13 Dec 2015 18:40
Status: Offline

Re: NAS4Free 11.0.0.4.4009 released (FreeBSD 11.0-RELEASE-P8)

#9

Post by nef »

Hi crest,
Nice workaround, thanks for info! :).
System specs: XigmaNAS embedded on USB / MB: AsRock Rack C236 WSI / CPU: E3-1235L v5 @ 2.0GHz / RAM: 32GB Kingston DDR4 2133mhz ECC / Case: U-NAS NSC-800 / Storage: 8x Western Digital Red (WD30EFRX) raidz2 / 120GB L2ARC MP500 / Mellanox ConnectX-3

User avatar
raulfg3
Site Admin
Site Admin
Posts: 5143
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: NAS4Free 11.0.0.4.4009 released (FreeBSD 11.0-RELEASE-P8)

#10

Post by raulfg3 »

12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

HP T510

pumo
Starter
Starter
Posts: 19
Joined: 26 Jan 2015 21:49
Status: Offline

Re: NAS4Free 11.0.0.4.4009 released (FreeBSD 11.0-RELEASE-P8)

#11

Post by pumo »

Strange, i did install yesterday 11.0.0.4.4009. first time version 11 after 10. I only have extended gui and I did upgrade it to newest before installing nas4free 11.
So I have extensions in menu bar. Is there any other reason to upgrade now?

User avatar
raulfg3
Site Admin
Site Admin
Posts: 5143
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: NAS4Free 11.0.0.4.4009 released (FreeBSD 11.0-RELEASE-P8)

#12

Post by raulfg3 »

pumo wrote:
11 Mar 2017 15:51
Strange, i did install yesterday 11.0.0.4.4009. first time version 11 after 10. I only have extended gui and I did upgrade it to newest before installing nas4free 11.
So I have extensions in menu bar. Is there any other reason to upgrade now?
NO necesary, problem only afect to new installs eg: if you want to install a new extrension like "thebrig".

My recomendation is that update to latest 4029 as it fixes more menu bugs and made a speed improvement.
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

HP T510

Post Reply

Return to “Release Builds”