*New BETA 13.1 series Release:
2022-09-21: XigmaNAS 13.1.0.5.9363- released!

*New 12.3 series Release:
2022-08-23: XigmaNAS 12.3.0.4.9328- released!

We really need "Your" help on XigmaNAS Language packages. Please help us today!

XigmaNAS talks on IRC https://web.libera.chat/#xigmanas, ircs://irc.libera.chat:6697 (TLS) or irc://irc.libera.chat:6667 (plain text)

[HOWTO] Configure IPMI with Xigmanas

Only Admin's or Moderators can move thread's to this sub-forum.
Nobody should start a new thread on this sub-forum.
Anybody can reply to a thread on this sub-forum.
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
User avatar
zoon01
Site Admin
Site Admin
Posts: 175
Joined: Dec 12th, '20, 11:19
Location: Netherlands
Contact:
Status: Offline

[HOWTO] ConfigureRe: IPMI with Xigmanas

#1

Post by zoon01 »

If you hardware contains IPMI BMC like a Supermicro X9/10/11/12 or other brands.

than first go to -> System > Advanced > loader.conf
there enable with toggle the switch ipmi_load.

Name Value description
ipmi_load YES IPMItool Server Management Utility


This module enables ipmitool on XigmaNAS and communicate between the WebGUI and console.
when enabled and BMC supports than on Diagnostics > Information > IPMI Statistics
you will see some stats like the picture below:
ipmioverview.png
I also used ipmitool to reprogram the fan values in my system.
open console and type in this case the FAN2 limits:

xigmanas: ~# ipmitool -I lan -U "Login Admin" -H "IP address of BMC" sensor thresh FAN2 lower 100 200 200
xigmanas: ~# ipmitool -I lan -U "Login Admin" -H "IP address of BMC" sensor thresh FAN2 upper 1350 1400 1500

google for more info in case someone needs reprogram valuses.

Just get the stats:
xigmanas: ~# ipmitool sensor list all

Regards,
zoon01
System specs: XigmaNAS 13.0.0.5 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.4, IPMI v.03.91 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600MHz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 6x Western Digital Red on ZFS RaidZ2 - UPS: APC Back-UPS Pro 900 (BR900G-GR)

Development is done on the same server within a virtualbox environment.
sleid
Advanced User
Advanced User
Posts: 89
Joined: Dec 12th, '20, 12:10
Location: FRANCE LIMOUSIN CORREZE
Status: Offline

[HOWTO] ConfigureRe: IPMI with Xigmanas

#2

Post by sleid »

Diagnostics > Information > IPMI Statistics
Diagnostics Informations Statistiques IPMI.JPG
Diagnostics > Information > IPMI Statistics
13.1.0.5 - Glowpanel (revision 9363)
FreeBSD 13.1-RELEASE-p2 #XigmaNAS: Sun Sep 18 23:50:01 CEST 2022
X64-embedded sur Intel(R) Atom(TM) CPU C2750 @ 2.40GHz Boot UEFI
ASRock C2750D4I 2 X 8GB DDR3 ECC
Pool of 2 vdev Raidz1: 3 WD40EFRX + 3 WD40EFRX + mirror 2 x 8To
Lan : 2 x 1000 base TX full-duplex
User avatar
Lux
experienced User
experienced User
Posts: 48
Joined: Dec 13th, '20, 13:20
Location: Bielefeld (Germany)
Contact:
Status: Offline

Re: [HOWTO] Configure IPMI with Xigmanas

#3

Post by Lux »

IPMI.PNG
8-)
Home: 12.3.x.9328/emb@32GB USB | 1270v2@X9SCA-F | ECC32GB | i340-T4[lagg@GS108Tv2&smb-mch] | M1015@IT | 9HDD~40TB@3xRaidZ1 | 4SSD+1xi800P@ZIL | ~44W idle@SS-400FL2 | Nanoxia Deep Silence 6B | 24/7
Services: CIFS, FTP, TFTP, SSH, NFS, Rsync, Syncthing, Webserver, BitTorrent, VirtualBox
Extensions: Bastille Jails [Asterisk, Certbot, Dendrite, Grafana, InfluxDB, Jellyfin, Murmur, Nginx, Postgres, Snowflake, Unbound, Vaultwarden]
VirtualBox: [Pi-hole]
Test: 12.3.x.9325/emb@16GB USB | X3 420e@M4A88TD-V | ECC16GB | i350-T2 | M1015@IT | 9xHDD+4xSSD | for TESTing only
Post Reply