*New 12.1 series Release:
2019-11-08: XigmaNAS 12.1.0.4.7091 - released!

*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

Posts only related to Release Builds, all others will be removed!
Forum rules
Set-Up GuideFAQsForum Rules
User avatar
ernie
Forum Moderator
Forum Moderator
Posts: 1418
Joined: 26 Aug 2012 19:09
Location: France - Val d'Oise
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#31

Post by ernie » 29 Oct 2018 18:29

Hello
I am trying to install this new version and I have some questions:

1) data partition of the initial usb for embedded version:

I have data for rrdgraph on this partition. Ok for the save of this data.
But how to put the saved data on the new installation ? As rrdgraph is launched, do I need to disable rrdgraph and then put the saved data ?

2) installation
What is the difference between installation embedded OS/GPT and installation embedded OS/EFI ?
Both are tagged 'preffered'.
If we can have advantage and disadvantage for this 2 choices, it will be good.

Thanks
NAS 1&2:
System: GA-6LXGH(BIOS: R01 04/30/2014) / 16 Go ECC
XigmaNAS 12.0.0.4.6766 embedded
NAS1: Xeon E3 1241@3.5GHz, 4HDD@2To/raidz2 (WD red), 3HDD@300Go/sas/raidz1 (Hitachi), 1SSD cache, Zlog on sas mirror
NAS2: G3220@3GHz, 3HDD@2To/raidz1 (Seagate), 1SSD cache, 1HDD@300Go/UFS
UPS: APC Back-UPS RS 900G
Case : Fractal Design XL R2

Extensions & services:
NAS1: OBI (Plex, extendedGUI, BTSync, zrep, rclone), nfs, UPS,
NAS2: OBI (extendedGUI, zrep (backup mode))

User avatar
JoseMR
Hardware & Software Guru
Hardware & Software Guru
Posts: 1224
Joined: 16 Apr 2014 04:15
Location: PR
Contact:
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#32

Post by JoseMR » 29 Oct 2018 20:06

amason wrote:
26 Oct 2018 05:14
...
Two things while I'm here:
- rolling back was super easy, how would I have done it before beadm? Reinstall? Or is/was there another way to get at the RootOnZFS upgrade snapshots?
- is the last line of the log important?

Thanks,
Andy
...

Hi, thanks for the kind words, to answer your question, to rollback a RootOnZFS install before beadm it was inconvenient for average users, you usually use snapshots if any and manually restore desired locations/files, however to roll back entire system this requires for the user to boot from a live media and import the zroot to an alternate root e.g. "/mnt/zroot" to avoid breaking current environment, rollback to the desired dataset/snapshot and then edit by hand loader.conf if needed, then export and reboot.

As for the log last line, nothing related to RootOnZFS, but maybe to VirtualBox, however since I don't use it I can't confirm for.

Regards
System: FreeBSD 12 RootOnZFS, MB: Supermicro X8SI6-F, Xeon X3450, 16GB DDR3 ECC RDIMMs.
XigmaNAS RootOnZFS
Addons at GitHub
BastilleBSD
Boot Environments Intro
JoseMRPubServ(temporary down)

User avatar
JoseMR
Hardware & Software Guru
Hardware & Software Guru
Posts: 1224
Joined: 16 Apr 2014 04:15
Location: PR
Contact:
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#33

Post by JoseMR » 29 Oct 2018 20:43

Bruce wrote:
24 Oct 2018 08:26
RootOnZFS -11.2.0.4.5774 need reinstall or Upgrade from WEBUI?

Hello, sorry for the late reply as I was absent due to my Wi-Fi Hotspot ISP gone down for maintenance/repairs unfortunately.

As far as I can tell RootOnZFS Platform does not need to be reinstalled ever unless denoted, simply Upgraded from the WebGUI, however on major releases, if a safe upgrade path is confirmed, the user can safely Upgrade as well.

Note that I'm not aware for any "rc.firmware or system_firmware.php" file changes that may affect the RootOnZFS Platform WebGUI Upgrade process, though we are always always testing from time to time to make sure nothing affect this Upgrade process further.

Regards
System: FreeBSD 12 RootOnZFS, MB: Supermicro X8SI6-F, Xeon X3450, 16GB DDR3 ECC RDIMMs.
XigmaNAS RootOnZFS
Addons at GitHub
BastilleBSD
Boot Environments Intro
JoseMRPubServ(temporary down)

User avatar
ernie
Forum Moderator
Forum Moderator
Posts: 1418
Joined: 26 Aug 2012 19:09
Location: France - Val d'Oise
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#34

Post by ernie » 01 Nov 2018 11:58

ernie wrote:
29 Oct 2018 18:29
Hello
I am trying to install this new version and I have some questions:

1) data partition of the initial usb for embedded version:

I have data for rrdgraph on this partition. Ok for the save of this data.
But how to put the saved data on the new installation ? As rrdgraph is launched, do I need to disable rrdgraph and then put the saved data ?

2) installation
What is the difference between installation embedded OS/GPT and installation embedded OS/EFI ?
Both are tagged 'preffered'.
If we can have advantage and disadvantage for this 2 choices, it will be good.

Thanks
up
any advice is welcome.
BR
NAS 1&2:
System: GA-6LXGH(BIOS: R01 04/30/2014) / 16 Go ECC
XigmaNAS 12.0.0.4.6766 embedded
NAS1: Xeon E3 1241@3.5GHz, 4HDD@2To/raidz2 (WD red), 3HDD@300Go/sas/raidz1 (Hitachi), 1SSD cache, Zlog on sas mirror
NAS2: G3220@3GHz, 3HDD@2To/raidz1 (Seagate), 1SSD cache, 1HDD@300Go/UFS
UPS: APC Back-UPS RS 900G
Case : Fractal Design XL R2

Extensions & services:
NAS1: OBI (Plex, extendedGUI, BTSync, zrep, rclone), nfs, UPS,
NAS2: OBI (extendedGUI, zrep (backup mode))

User avatar
JoseMR
Hardware & Software Guru
Hardware & Software Guru
Posts: 1224
Joined: 16 Apr 2014 04:15
Location: PR
Contact:
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#35

Post by JoseMR » 01 Nov 2018 12:34

ernie wrote:
29 Oct 2018 18:29
Hello
I am trying to install this new version and I have some questions:

1) data partition of the initial usb for embedded version:

I have data for rrdgraph on this partition. Ok for the save of this data.
But how to put the saved data on the new installation ? As rrdgraph is launched, do I need to disable rrdgraph and then put the saved data ?

2) installation
What is the difference between installation embedded OS/GPT and installation embedded OS/EFI ?
Both are tagged 'preffered'.
If we can have advantage and disadvantage for this 2 choices, it will be good.

Thanks
Hi ernie, sorry for overlooking your question.

The #1 requires for user manual backup and restore if data partition is in use on Embedded platforms, hence is advice to never store important data on that partition, alternatively, a postinit/shutdown script to automatically backup/restore this data to a permanent location could be handy, Rsync can be useful here.

As for the #2, the "OS/EFI" is for the latest hardware supporting the UEFI(Unified Extensible Firmware Interface) that replaces the legacy BIOS, pretty sure "OS/GPT" is what you want here.

Regards
System: FreeBSD 12 RootOnZFS, MB: Supermicro X8SI6-F, Xeon X3450, 16GB DDR3 ECC RDIMMs.
XigmaNAS RootOnZFS
Addons at GitHub
BastilleBSD
Boot Environments Intro
JoseMRPubServ(temporary down)

User avatar
ernie
Forum Moderator
Forum Moderator
Posts: 1418
Joined: 26 Aug 2012 19:09
Location: France - Val d'Oise
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#36

Post by ernie » 01 Nov 2018 13:23

JoseMR wrote:
01 Nov 2018 12:34
ernie wrote:
29 Oct 2018 18:29
Hello
I am trying to install this new version and I have some questions:

1) data partition of the initial usb for embedded version:

I have data for rrdgraph on this partition. Ok for the save of this data.
But how to put the saved data on the new installation ? As rrdgraph is launched, do I need to disable rrdgraph and then put the saved data ?

2) installation
What is the difference between installation embedded OS/GPT and installation embedded OS/EFI ?
Both are tagged 'preffered'.
If we can have advantage and disadvantage for this 2 choices, it will be good.

Thanks
Hi ernie, sorry for overlooking your question.

The #1 requires for user manual backup and restore if data partition is in use on Embedded platforms, hence is advice to never store important data on that partition, alternatively, a postinit/shutdown script to automatically backup/restore this data to a permanent location could be handy, Rsync can be useful here.

As for the #2, the "OS/EFI" is for the latest hardware supporting the UEFI(Unified Extensible Firmware Interface) that replaces the legacy BIOS, pretty sure "OS/GPT" is what you want here.

Regards
Thanks Jose
Concerning #2, my plateform supports both. Is there any advantage of EFI versus GPT ?
I understood that UEFI is based on GPT and not MBR (partition structure). So I have doubt for the choice , as for me both choice are with GPT.
BR
NAS 1&2:
System: GA-6LXGH(BIOS: R01 04/30/2014) / 16 Go ECC
XigmaNAS 12.0.0.4.6766 embedded
NAS1: Xeon E3 1241@3.5GHz, 4HDD@2To/raidz2 (WD red), 3HDD@300Go/sas/raidz1 (Hitachi), 1SSD cache, Zlog on sas mirror
NAS2: G3220@3GHz, 3HDD@2To/raidz1 (Seagate), 1SSD cache, 1HDD@300Go/UFS
UPS: APC Back-UPS RS 900G
Case : Fractal Design XL R2

Extensions & services:
NAS1: OBI (Plex, extendedGUI, BTSync, zrep, rclone), nfs, UPS,
NAS2: OBI (extendedGUI, zrep (backup mode))

User avatar
JoseMR
Hardware & Software Guru
Hardware & Software Guru
Posts: 1224
Joined: 16 Apr 2014 04:15
Location: PR
Contact:
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#37

Post by JoseMR » 01 Nov 2018 14:13

ernie wrote:
01 Nov 2018 13:23
Thanks Jose
Concerning #2, my plateform supports both. Is there any advantage of EFI versus GPT ?
I understood that UEFI is based on GPT and not MBR (partition structure). So I have doubt for the choice , as for me both choice are with GPT.
BR
Hi ernie, besides the boot process and few advantages booting of UEFI, no real benefits under a headless server, the OS/EFI integration in XigmaNAS was mainly added because some of the newest hardware boot only on UEFI preventing some users from using XigmaNAS, as well as for future proof.

Regards
System: FreeBSD 12 RootOnZFS, MB: Supermicro X8SI6-F, Xeon X3450, 16GB DDR3 ECC RDIMMs.
XigmaNAS RootOnZFS
Addons at GitHub
BastilleBSD
Boot Environments Intro
JoseMRPubServ(temporary down)

User avatar
ernie
Forum Moderator
Forum Moderator
Posts: 1418
Joined: 26 Aug 2012 19:09
Location: France - Val d'Oise
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#38

Post by ernie » 01 Nov 2018 14:34

JoseMR wrote:
01 Nov 2018 14:13
ernie wrote:
01 Nov 2018 13:23
Thanks Jose
Concerning #2, my plateform supports both. Is there any advantage of EFI versus GPT ?
I understood that UEFI is based on GPT and not MBR (partition structure). So I have doubt for the choice , as for me both choice are with GPT.
BR
Hi ernie, besides the boot process and few advantages booting of UEFI, no real benefits under a headless server, the OS/EFI integration in XigmaNAS was mainly added because some of the newest hardware boot only on UEFI preventing some users from using XigmaNAS, as well as for future proof.

Regards
It is clear. Thanks
NAS 1&2:
System: GA-6LXGH(BIOS: R01 04/30/2014) / 16 Go ECC
XigmaNAS 12.0.0.4.6766 embedded
NAS1: Xeon E3 1241@3.5GHz, 4HDD@2To/raidz2 (WD red), 3HDD@300Go/sas/raidz1 (Hitachi), 1SSD cache, Zlog on sas mirror
NAS2: G3220@3GHz, 3HDD@2To/raidz1 (Seagate), 1SSD cache, 1HDD@300Go/UFS
UPS: APC Back-UPS RS 900G
Case : Fractal Design XL R2

Extensions & services:
NAS1: OBI (Plex, extendedGUI, BTSync, zrep, rclone), nfs, UPS,
NAS2: OBI (extendedGUI, zrep (backup mode))

User avatar
ernie
Forum Moderator
Forum Moderator
Posts: 1418
Joined: 26 Aug 2012 19:09
Location: France - Val d'Oise
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#39

Post by ernie » 01 Nov 2018 22:25

Hello
I tried the installation and I have an issue.
The destination disk is a ssd where the third partition is for the swap.
And when I boot on a new usb key with live USB of Xigmanas for installation, the installation stops as there is issue with the disk.

I tried to use shell with gpart in order to delete all partition, but the partition 3 is always busy.... It is the swap partition and I didn't understand why it is busy as I am on a liveUSB.

I look the liveUSB Xigmanas via webgui and I see in menu 'Advanced/swap' that the partition is used:
Device: /dev/ada4p3 | Total: 17.17GB | Used: 0B | Free: 17.17GB

How can I stop the use of this partition ?

I tried to look in mount point but it is empty.

Edit :
I tried to put another USB key and to choose the new usb key as Swap. It works but now I have 2 swaps !!!!
0% of 17.17GB
Device: /dev/ada4p3 | Total: 17.17GB | Used: 0B | Free: 17.17GB
0% of 8.05GB
Device: /dev/da8p1 | Total: 8.05GB | Used: 0B | Free: 8.05GB

A reboot don't solved the point : always the ada4p3 as swap.

B.R.
NAS 1&2:
System: GA-6LXGH(BIOS: R01 04/30/2014) / 16 Go ECC
XigmaNAS 12.0.0.4.6766 embedded
NAS1: Xeon E3 1241@3.5GHz, 4HDD@2To/raidz2 (WD red), 3HDD@300Go/sas/raidz1 (Hitachi), 1SSD cache, Zlog on sas mirror
NAS2: G3220@3GHz, 3HDD@2To/raidz1 (Seagate), 1SSD cache, 1HDD@300Go/UFS
UPS: APC Back-UPS RS 900G
Case : Fractal Design XL R2

Extensions & services:
NAS1: OBI (Plex, extendedGUI, BTSync, zrep, rclone), nfs, UPS,
NAS2: OBI (extendedGUI, zrep (backup mode))

User avatar
ms49434
Developer
Developer
Posts: 760
Joined: 03 Sep 2015 18:49
Location: Neuenkirchen-Vörden, Germany - GMT+1
Contact:
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#40

Post by ms49434 » 01 Nov 2018 23:42

please try

Code: Select all

swapoff /dev/ada4p3
swapoff /dev/da8p1
1) XigmaNAS 12.1.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U2, 22GB out of 32GB ECC RAM, LSI 9300-8i IT mode in passthrough mode. Pool 1: 2x HGST 10TB, mirrored, SLOG: Samsung 850 Pro, L2ARC: Samsung 850 Pro, Pool 2: 1x Samsung 860 EVO 1TB , services: Samba AD, CIFS/SMB, ftp, ctld, rsync, syncthing, zfs snapshots.
2) XigmaNAS 12.1.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7U2, 8GB out of 32GB ECC RAM, IBM M1215 crossflashed, IT mode, passthrough mode, 2x HGST 10TB , services: rsync.

User avatar
ernie
Forum Moderator
Forum Moderator
Posts: 1418
Joined: 26 Aug 2012 19:09
Location: France - Val d'Oise
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#41

Post by ernie » 02 Nov 2018 10:29

ms49434 wrote:
01 Nov 2018 23:42
please try

Code: Select all

swapoff /dev/ada4p3
swapoff /dev/da8p1
Thanks ms49434, it works and the installation was fine.
But I didn’t understand why the live USB seen the swap partition and used it, as I didn’t import disk and Zfs.

BR
NAS 1&2:
System: GA-6LXGH(BIOS: R01 04/30/2014) / 16 Go ECC
XigmaNAS 12.0.0.4.6766 embedded
NAS1: Xeon E3 1241@3.5GHz, 4HDD@2To/raidz2 (WD red), 3HDD@300Go/sas/raidz1 (Hitachi), 1SSD cache, Zlog on sas mirror
NAS2: G3220@3GHz, 3HDD@2To/raidz1 (Seagate), 1SSD cache, 1HDD@300Go/UFS
UPS: APC Back-UPS RS 900G
Case : Fractal Design XL R2

Extensions & services:
NAS1: OBI (Plex, extendedGUI, BTSync, zrep, rclone), nfs, UPS,
NAS2: OBI (extendedGUI, zrep (backup mode))

User avatar
MikeMac
Forum Moderator
Forum Moderator
Posts: 498
Joined: 07 Oct 2012 23:12
Location: Moscow, Russia
Contact:
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#42

Post by MikeMac » 02 Nov 2018 21:15

I suppose this should be updated in the product description "XigmaNAS supports (...), Software RAID (0,1,5)" here https://sourceforge.net/projects/xigmanas/ (probably other places too)

wsmith
NewUser
NewUser
Posts: 6
Joined: 10 Aug 2018 19:21
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#43

Post by wsmith » 02 Nov 2018 22:35

could someone do an interim build that includes r6167 please. virtualbox is unusable and i cant downgrade xigmanas.

CrashDavis
Starter
Starter
Posts: 19
Joined: 21 Jul 2015 21:19
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#44

Post by CrashDavis » 03 Nov 2018 00:09

Im also having trouble with virtualbox, vnc does not work properly. anyone else?
Server Specs

XigmaNAS: 11.2.0.4 - Omnius (revision 5774)
Case: Antec Perf Series P100 + Mediasonic ProBox H82-SU3S2 8 Bay
Motherboard: SuperMicro X8SIE
CPU: Intel(R) Xeon(R) CPU X3470 @ 2.93GHz
Memory: 32GB RDIMM/ECC PC3-8500 DDR3-1066mhz - HMT31GR7BFR8C-G7
Storage: 6x Seagate Barracuda 1TB ST31000528AS + 8x Western Digital 3TB WD Red WD30EFRX
System Disk: Kingspec 64GB SSD - ACSC2M064S25 SATA III
Network: LACP 3/Gbs (Intel EXPI9402PF 2 Port Fiber) + 1 Gb/s Intel Copper
Extensions: OneButtonInstaller, Extended GUI, Plex

User avatar
zoon01
Developer
Developer
Posts: 771
Joined: 20 Jun 2012 21:06
Location: Netherlands
Contact:
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#45

Post by zoon01 » 03 Nov 2018 01:44

VNC is broken on virtualbox 5.2.20, for that reason i have downgraded to 5.2.18, please upgrade XigmaNAS to new release 11.2.0.4.6171
and it will be working again.

at virtualbox.org there is an open ticket too: see https://www.virtualbox.org/ticket/18072
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.84 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz

Development system is same system in virtualbox.

nasser
Starter
Starter
Posts: 43
Joined: 01 May 2017 21:00
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#46

Post by nasser » 06 Nov 2018 21:36

zoon01 wrote:
27 Oct 2018 19:28
nasser wrote:
27 Oct 2018 17:19
my NAS is waiting for about an hour with this message

"The firmware is now being installed. The server will reboot automatically."


"A firmware upgrade is in progress."


Version 6026
You did not read the Readme, you need a reinstall not a firmware upgrade, also no embedded file has been released yet!
So i have no clue about what you are doing.
oh!
on the VGA screen it says "x64-full"
so I need to download XigmaNAS-x64-full-11.2.0.4.6177.tgz and do a fresh install?


Thanks!

doktornotor
Advanced User
Advanced User
Posts: 196
Joined: 16 May 2017 00:22
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#47

Post by doktornotor » 06 Nov 2018 22:10

nasser wrote:
06 Nov 2018 21:36
so I need to download XigmaNAS-x64-full-11.2.0.4.6177.tgz and do a fresh install?
No. That file is ONLY for GUI upgrades.

nasser
Starter
Starter
Posts: 43
Joined: 01 May 2017 21:00
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#48

Post by nasser » 06 Nov 2018 23:09

so, how to proceed?!

doktornotor
Advanced User
Advanced User
Posts: 196
Joined: 16 May 2017 00:22
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#49

Post by doktornotor » 07 Nov 2018 00:09

I would urge you to review the fine readme_11.2.txt as already suggested multiple times.

https://sourceforge.net/projects/xigman ... t/download

nasser
Starter
Starter
Posts: 43
Joined: 01 May 2017 21:00
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#50

Post by nasser » 07 Nov 2018 21:08

edit: ah, I should perform a fresh install with Live/USB.
For what is "full"?
embedded for web-gui-upgrade..


I run "sed -i '' -E 's/SIZE=\"320M\"/SIZE=\"384M\"/g' /etc/rc.firmware" on the shell, then:

With
XigmaNAS-x64-embedded-11.2.0.4.6177.img.xz ("Embedded.img.xz is only for upgrades by WEBGUI")
error: "The file you try to flash is not for this platform (x64-full)."

I guess I've a RootOnZFS install
zroot 5.92G 3.71G 88K /zroot
zroot/ROOT 5.91G 3.71G 88K /zroot/ROOT
zroot/ROOT/default-install 3.99M 3.71G 3.00G /
zroot/ROOT/upgrade-2018-09-06-145347 3.61M 3.71G 3.18G /
zroot/ROOT/upgrade-2018-10-18-204806 5.90G 3.71G 3.85G /

User avatar
JoseMR
Hardware & Software Guru
Hardware & Software Guru
Posts: 1224
Joined: 16 Apr 2014 04:15
Location: PR
Contact:
Status: Offline

Re: XigmaNAS 11.2.0.4.6154 released (FreeBSD 11.2-RELEASE-P4)

#51

Post by JoseMR » 07 Nov 2018 23:05

nasser wrote:
07 Nov 2018 21:08
edit: ah, I should perform a fresh install with Live/USB.
For what is "full"?
embedded for web-gui-upgrade..


I run "sed -i '' -E 's/SIZE=\"320M\"/SIZE=\"384M\"/g' /etc/rc.firmware" on the shell, then:

With
XigmaNAS-x64-embedded-11.2.0.4.6177.img.xz ("Embedded.img.xz is only for upgrades by WEBGUI")
error: "The file you try to flash is not for this platform (x64-full)."

I guess I've a RootOnZFS install
zroot 5.92G 3.71G 88K /zroot
zroot/ROOT 5.91G 3.71G 88K /zroot/ROOT
zroot/ROOT/default-install 3.99M 3.71G 3.00G /
zroot/ROOT/upgrade-2018-09-06-145347 3.61M 3.71G 3.18G /
zroot/ROOT/upgrade-2018-10-18-204806 5.90G 3.71G 3.85G /

Hello, the command [ sed -i '' -E 's/SIZE=\"320M\"/SIZE=\"384M\"/g' /etc/rc.firmware ] for RootOnZFS is to let the users to increase on-the-fly the memory disk used by the firmware process, this is because the "file_name.tgz" used for upgrading RootOnZFS has grown since the MariaDB integration, this removes for the user to have to re-install RootOnZFS, however if the user have the possibility to save *config and re-install Root-OnZFS, it will be preferred, I will address this behavior and completely remove this limitation for RootOnZFS as RootOnZFS should never be re-installed unless denoted. 8-)

Edit: As for revision 6179 RootOnZFS platforms have no memory file system size limitation during upgrade process.

Also as as for:
XigmaNAS-x64-embedded-11.2.0.4.6177.img.xz ("Embedded.img.xz is only for upgrades by WEBGUI")
error: "The file you try to flash is not for this platform (x64-full)."
Embedded Platforms Uses: XigmaNAS-x64-embedded-11.2.0.4.XXXX.img.xz
RootOnZFS Platforms Uses: XigmaNAS-x64-full-11.2.0.4.XXXX.tgz


Note that only Full RootOnZFS Platforms can be upgraded by WebGUI witn .TGZ files, Legacy Full Platforms running on UFS can only be upgraded booting LiveMedia as expected.

Regards
System: FreeBSD 12 RootOnZFS, MB: Supermicro X8SI6-F, Xeon X3450, 16GB DDR3 ECC RDIMMs.
XigmaNAS RootOnZFS
Addons at GitHub
BastilleBSD
Boot Environments Intro
JoseMRPubServ(temporary down)

Post Reply

Return to “Release Builds”