Sorry we lost some posts because of database errors!

*New 12.1 series Release:
2020-09-01: XigmaNAS 12.1.0.4.7728 - released

*New 11.4 series Release:
2020-08-27: XigmaNAS 11.4.0.4.7718 - released!


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

[HOWTO] install Plex in a jail via thebrig

Jails with XigmaNAS
Forum rules
Set-Up GuideFAQsForum Rules
russb123
NewUser
NewUser
Posts: 12
Joined: 25 Aug 2013 18:18
Status: Offline

[HOWTO] install Plex in a jail via thebrig

#1

Post by russb123 »

I have been banging my head trying to get plex media server installed in nas4free. I currently have a fresh full install on a 64gb SSD, but would like to figure out the install inside a jail so I can switch to a embedded if I want. Installing thebrig was simple by following the instructions in this forum, but now I am lost.

Could someone help me with step by step (complete newbie here) for installing Plex using the brig.

Thank you all.

russb123
NewUser
NewUser
Posts: 12
Joined: 25 Aug 2013 18:18
Status: Offline

Re: Can someone help me install Plex in a jail via thebrig?

#2

Post by russb123 »

Ok I think I figured it out:

1. Follow instructions here to install theBrig : viewtopic.php?f=79&t=3894
2. Inside thebrig gui (after initial setup) create a jail by clicking on the "+" on the current jails tab
3. Give the jail a useful name (plex in this case) and a ip for your network, i used 192.168.1.201 I left everything else as default except I chekced all the official freebsd files (not sure if any/all are needed)
4. Click Add.
5. Click apply once back into the current jails tab. After this I had to refresh my browser to get the "on-line view" on the top of the page to show.
6 Click the green button below action to start the jail.
7 Once started goto your SSH (putty) command line.
8. type jls - you should see the ip and name of the jail you just created. If you do not something is wrong and you should stop here till you get it running
9 now type jexec 1 csh This will log you into your jails root and is needed for the next steps The "1" is the ID number of the jail it could be another number if you have more jails
10 type fetch http://plexrpms.markwalker.dk/FreeBSD-P ... .4.125.tbz
11 type pkg_add plexmediaserver-0.9.8.4.125.tbz
12. For this next step I use Winscp http://winscp.net/eng/download.php browse to the etc folder inside your jail mine was /mnt/mypool/jails/plex/etc scroll down to rc.conf and double click it
13 at the bottom of the file add: plexmediaserver_enable="YES"
14 Click save and exit
15 Go back to your SSH (putty) command line and type: /usr/local/etc/rc.d/plexmediaserver start
16 If all is well you should get a confirmation of the start
17. use your web browser and point to {ip used for jail}:32400/web in my case it was 192.168.1.201:32400/web and enjoy

I hope this helps someone else.

I am currently trying to figure out how to make mounts inside the jail point to mypool outside the jail to add my library. if anyone can help me my jail is /mnt/mypool/jails/Plex and I need to someohow get access to /mnt/mypool/Media/Movies from there.

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4968
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Can someone help me install Plex in a jail via thebrig?

#3

Post by raulfg3 »

Revise Info about fstab in thebrig: viewtopic.php?f=79&t=3894#p20142

and beware: You need to have a 64 bit CPU ( Plex only works on 64bit CPU), so you need to have a CPU & N4F x64 not a x86
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510

User avatar
alexey123
Moderator
Moderator
Posts: 1555
Joined: 19 Aug 2012 08:22
Location: Israel, Karmiel
Contact:
Status: Offline

Re: Can someone help me install Plex in a jail via thebrig?

#4

Post by alexey123 »

russb123 wrote: if anyone can help me my jail is /mnt/mypool/jails/Plex and I need to someohow get access to /mnt/mypool/Media/Movies from there.
I don't understand your problem :mrgreen:
What force prevents you do next:
Create folder for mount (from NAS4Free )

Code: Select all

mkdir /mnt/mypool/jails/Plex/mnt/movies
add to the window Fstab line

Code: Select all

/mnt/mypool/Media/Movies /mnt/mypool/jails/Plex/mnt/movies nullfs ro 0 0
Home12.1.0.4 - Ingva (revision 7091)/ x64-embedded on AMD A8-7600 Radeon R7 A88XM-PLUS/ 16G RAM / UPS Ippon Back Power Pro 600
Lab 12.1.0.4 - Ingva (revision 7091) /x64-embedded on Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz / H61M-DS2 / 4G RAM / UPS Ippon Back Power Pro 600

russb123
NewUser
NewUser
Posts: 12
Joined: 25 Aug 2013 18:18
Status: Offline

Re: Can someone help me install Plex in a jail via thebrig?

#5

Post by russb123 »

Thanks guys that did the trick.

Now can anyone guess why my PS3 or Xbox 360 on the same network cannot see the plexmedia server when it scans for media servers? I also have a Roku and that works, but it has my myplex username and password to connect with.

Any ideas I could try would be great. The only port I have forwarded on my router is 32400 to the ip of the jail my plex install is in.

Thanks again!

russb123
NewUser
NewUser
Posts: 12
Joined: 25 Aug 2013 18:18
Status: Offline

Re: Can someone help me install Plex in a jail via thebrig?

#6

Post by russb123 »

I was able to figure out my own answer. I just added some things to my rc.conf. I am not sure if everything I put in is needed, i just compared it to my default installed rc.conf and put whatever looked like it was for networking.

My rc.conf now looks like this for my plex install inside a full jail:

Code: Select all

sendmail_enable="NONE"
syslogd_flags="-ss"
rpc_bind="NO"
network_interfaces="re0"
cron_flags="$cron_flags -J 15"
mdnsresponder_enable="YES"
samba_enable="YES"
sshd_enable="YES"
plexmediaserver_enable="YES"
hostname="Plex.local"
ipv4_addrs_re0="192.168.1.202/24"
defaultrouter="192.168.1.1"
netwait_enable="YES"
netwait_ip="192.168.1.1"
netwait_if="re0"
plexmediaserver_support_path="/usr/local/plexdata"
plexmediaserver_tmp="/tmp"
gateway_enable="YES"
After I restarted the jail my xbox saw the plex media server immediately and I was able to start a movie from it.

User avatar
alexey123
Moderator
Moderator
Posts: 1555
Joined: 19 Aug 2012 08:22
Location: Israel, Karmiel
Contact:
Status: Offline

Re: Can someone help me install Plex in a jail via thebrig?

#7

Post by alexey123 »

russb123 wrote: My rc.conf now looks like this for my plex install inside a full jail:
sendmail_enable="NONE"
syslogd_flags="-ss"
rpc_bind="NO"
network_interfaces="re0"
cron_flags="$cron_flags -J 15"
mdnsresponder_enable="YES" <--- your jail have mdnsresponder ?
samba_enable="YES" <--- you jail have samba ???
sshd_enable="YES" <-- If jail have SSH, can you connect into ?
plexmediaserver_enable="YES"
hostname="Plex.local"
ipv4_addrs_re0="192.168.1.202/24" <--- jail cannot change IP adress
defaultrouter="192.168.1.1" <---- Just no need
netwait_enable="YES" <------- no need
netwait_ip="192.168.1.1" <---- no need
netwait_if="re0" <------- no need
plexmediaserver_support_path="/usr/local/plexdata"
plexmediaserver_tmp="/tmp"
gateway_enable="YES" <--- your jail ran as gateway? WOW!! Can you wrote howto?
Hmmmmm.
russb123 wrote:After I restarted the jail my xbox saw the plex media server immediately and I was able to start a movie from it.
What problem?
Home12.1.0.4 - Ingva (revision 7091)/ x64-embedded on AMD A8-7600 Radeon R7 A88XM-PLUS/ 16G RAM / UPS Ippon Back Power Pro 600
Lab 12.1.0.4 - Ingva (revision 7091) /x64-embedded on Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz / H61M-DS2 / 4G RAM / UPS Ippon Back Power Pro 600

russb123
NewUser
NewUser
Posts: 12
Joined: 25 Aug 2013 18:18
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#8

Post by russb123 »

I answered my own problem. It is my post above that asks the question :)

tfast500
NewUser
NewUser
Posts: 12
Joined: 30 Aug 2013 22:25
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#9

Post by tfast500 »

i mapped my movies,pictures, and music using the fstab however its dont detecting any of my media?

/mnt/Storage/Public/Movies /mnt/Storage/Jail/Plex/mnt/Movies nullfs rw 0 0
/mnt/Storage/Public/Pictures /mnt/Storage/Jail/Plex/mnt/Pictures nullfs rw 0 0
/mnt/Storage/Public/Music /mnt/Storage/Jail/Plex/mnt/Music nullfs rw 0 0

tfast500
NewUser
NewUser
Posts: 12
Joined: 30 Aug 2013 22:25
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#10

Post by tfast500 »

never mind i figured it out the owner and groups were not set properly

oleost
NewUser
NewUser
Posts: 12
Joined: 11 Sep 2012 10:15
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#11

Post by oleost »

Howto install PlexConnect

Enter jail (Replace 1 with your Jail ID)

Code: Select all

jexec 1 csh
Fetch Plexconnect and unzip

Code: Select all

fetch https://github.com/iBaa/PlexConnect/archive/master.zip
unzip master.zip
Installing Pyton27 and Nano

Code: Select all

pkg_add -v -r python27
pkg_add -v -r nano
And then I copy a previosly made cert. file to correct folder in Jail. https://langui.sh/2013/08/27/appletv-ssl-plexconnect/

Code: Select all

EXIT
cp /mnt/PATH_TO/trailers.pem /mnt/PATH_TO/Jail/plex/PlexConnect-master/assets/certificates/
jexec 1 csh

Code: Select all

cd PlexConnect-master/
Start PlexConnect so it creates Settings.cfg

Code: Select all

./PlexConnect.py
When it started Exit using CTRL + C

Code: Select all

nano Settings.cfg
Change the 2 lines below

Code: Select all

ip_pms = 10.0.0.30 # This one you have to change to your Jail IP address
enable_plexgdm = False # This one you have to change from True to False
To start it you have to type.

Code: Select all

/bin/sh /PlexConnect-master/PlexConnect_daemon.bash start
Last edited by oleost on 12 Oct 2013 12:07, edited 1 time in total.

User avatar
MikeMac
Forum Moderator
Forum Moderator
Posts: 444
Joined: 07 Oct 2012 23:12
Location: Moscow, Russia
Contact:
Status: Offline

Re: Can someone help me install Plex in a jail via thebrig?

#12

Post by MikeMac »

russb123 wrote:I just added some things to my rc.conf.
Thank you very much, after adding lines to rc.conf Plex DLNA server appears!

In acording with my testing, addition of just four lines as below are enough

Code: Select all

plexmediaserver_enable="YES"
hostname="Plex.local"
plexmediaserver_support_path="/usr/local/plexdata"
plexmediaserver_tmp="/tmp"

calculus
NewUser
NewUser
Posts: 1
Joined: 02 Dec 2013 16:19
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#13

Post by calculus »

Hello,

i installed successfully plex media server using this guide. Everything is working except library update (automatic nor periodic). Library update works only manually (if i hit update button).

An other user solved the same problem after server restart, but it didnt work for me.

Maybe this is a cron issue?

simplyme
NewUser
NewUser
Posts: 5
Joined: 02 May 2014 02:48
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#14

Post by simplyme »

Hi guys, I have followed the guide and got Plex installed and I can access it via it's own GUI but it cannot see any of the files I have.

I added folders on the Gui , eg. /mnt/Media/Movies & /mnt/Media/Music but it fails to see any. Do I need to set permissions anywhere?

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4968
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#15

Post by raulfg3 »

simplyme wrote:I added folders on the Gui , eg. /mnt/Media/Movies & /mnt/Media/Music but it fails to see any. Do I need to set permissions anywhere?
revise that really your media files are in /mnt/Media/Movies & /mnt/Media/Music

do an ls -l to see owner and permission.

and probably user plex must be in the wheel group ( you can do it on the N4F webGUI).
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510

simplyme
NewUser
NewUser
Posts: 5
Joined: 02 May 2014 02:48
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#16

Post by simplyme »

No Plex user showing? I can see in process log file, Plex has a user id of 972

ls -l just shows Root user

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4968
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#17

Post by raulfg3 »

simplyme wrote:No Plex user showing? I can see in process log file, Plex has a user id of 972

ls -l just shows Root user

Go to webGUi and add user 972 as user plex in group wheel, define bash as shell login and define a path for home like /mnt/yourpoolyouplexjail/mnt/Media

reboot and see if this time show multimedia files.

PD: please post ls -l in /mnt/Media and in /mnt/Media/Movies inside your jail to be sure that you have files here.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510

simplyme
NewUser
NewUser
Posts: 5
Joined: 02 May 2014 02:48
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#18

Post by simplyme »

I have done this and still no luck :(

Below example is of my TV folder:

root@Plex:/mnt/XBMC # ls -l
total 16
drwxrwxrwx 4 root wheel 512 May 10 00:26 Kids
drwxrwxrwx 4 root wheel 512 May 10 00:25 Movies
drwxrwxrwx 2 root wheel 512 May 10 00:27 Music
drwxrwxrwx 2 root wheel 512 May 10 00:27 TV

root@Plex:/mnt/XBMC/TV # ls -l
total 0


fstab is as below:

/mnt/Media/XBMC/Media/TV /mnt/Media/Jail/Plex/mnt/XBMC/TV nullfs rw 0 0

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4968
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#19

Post by raulfg3 »

simplyme wrote:/mnt/Media/XBMC/Media/TV /mnt/Media/Jail/Plex/mnt/XBMC/TV nullfs rw 0 0
change fstab by:

Code: Select all

/mnt/Media/XBMC/Media /mnt/Media/Jail/Plex/mnt/XBMC nullfs rw 0 0
once done stop jail, wait 20 seconds and restart jail, this time must work


PD: Be sure that /mnt/Media/Jail/Plex/mnt/XBMC exist before to start jail ( stop jail and do a cd /mnt/Media/Jail/Plex/mnt/XBMC from outside the jail to check that folder exist, if do not exist, you must create first

Code: Select all

mkdir /mnt/Media/Jail/Plex/mnt/XBMC
)

once you can see media files inside your jail, you can add any media folder that you want to plex in the plex webGUI; Eg: you can add /mnt/Media/Jail/Plex/mnt/XBMC/TV but not to add /mnt/Media/Jail/Plex/mnt/XBMC/Kids
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510

simplyme
NewUser
NewUser
Posts: 5
Joined: 02 May 2014 02:48
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#20

Post by simplyme »

Something so simple! Thank you Raul - that's been driving me mad :)

rexxcalibur
NewUser
NewUser
Posts: 1
Joined: 05 Jul 2014 00:11
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#21

Post by rexxcalibur »

Hi guys!

I firstly want to say that I have used this forum for a good few years to help me build and mod my NAS4free servers and have found them to be very useful. Thanks for all the help! Just wondering if anyone know how to update the Plex server after it has been installed using this method?

dreamcat4
experienced User
experienced User
Posts: 111
Joined: 21 Mar 2014 21:59
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#22

Post by dreamcat4 »

Well pkg_add is no longer supported by FreeBSD. SO I don't expect you can get the newest Plex pkg versions anymore from those old FreeBSD repos. You can install newest NAS4Free r999. Then run FreeBSD-update inside your jail. Then upgrade the pkg_* tools to pkgng the standard FreeBSD ways with some efforts. But it would probably be a lot easier / faster just to create a new Plex jail from scratch, install the latest Plex (from pkgng). And manually move across your old config files / Media Database in to the new jail.

Also, in a few weeks I will eventually make a new tutorial especially for Plex, to install into Finch chroot (not Brig). But it's not terribly high on my list of priorities. Until then there are the more general jails HowTo's to follow.

liver
Starter
Starter
Posts: 64
Joined: 18 May 2013 21:32
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#23

Post by liver »

Code: Select all

nas: ~# jexec 12 $SHELL
root@plex:/ # service plexmediaserver status
plexmediaserver is running as pid 26775.
root@plex:/ # fetch -o - http://127.0.0.1:32400/web
fetch: http://127.0.0.1:32400/web: Not Found
help to solve the problem

root@plex:/ # fetch -o - http://127.0.0.1:32400/web/index.html
return HTML
Version 11.1.0.4.5673
Platform OS F11.1-RELEASE-P11
Platform x64-embedded on AMD C-60 APU with Radeon(tm) HD Graphics
System ASUSTeK COMPUTER INC. C60M1-I
ZFS pool device [Pool_01] 2xWDC WD10EFRX-68JCSN0 1TB
ZFS pool device [Pool_02] 2xWDC WD10EFRX-68FYTN0 1TB
UFS backup device [Backups] 1xWDC WD10EFRX-68FYTN0 1TB

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4968
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#24

Post by raulfg3 »

12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4968
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#25

Post by raulfg3 »

liver wrote:
22 Oct 2020 18:59

Code: Select all

nas: ~# jexec 12 $SHELL
root@plex:/ # service plexmediaserver status
plexmediaserver is running as pid 26775.
root@plex:/ # fetch -o - http://127.0.0.1:32400/web
fetch: http://127.0.0.1:32400/web: Not Found
help to solve the problem

root@plex:/ # fetch -o - http://127.0.0.1:32400/web/index.html
return HTML

This have no sense.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510

liver
Starter
Starter
Posts: 64
Joined: 18 May 2013 21:32
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#26

Post by liver »

raulfg3 wrote:
22 Oct 2020 21:07
liver wrote:
22 Oct 2020 18:59

Code: Select all

nas: ~# jexec 12 $SHELL
root@plex:/ # service plexmediaserver status
plexmediaserver is running as pid 26775.
root@plex:/ # fetch -o - http://127.0.0.1:32400/web
fetch: http://127.0.0.1:32400/web: Not Found
help to solve the problem

root@plex:/ # fetch -o - http://127.0.0.1:32400/web/index.html
return HTML

This have no sense.

Code: Select all

nas: ~# fetch -o - http://192.168.1.9:32400/web
fetch: http://192.168.1.9:32400/web: Not Found
Version 11.1.0.4.5673
Platform OS F11.1-RELEASE-P11
Platform x64-embedded on AMD C-60 APU with Radeon(tm) HD Graphics
System ASUSTeK COMPUTER INC. C60M1-I
ZFS pool device [Pool_01] 2xWDC WD10EFRX-68JCSN0 1TB
ZFS pool device [Pool_02] 2xWDC WD10EFRX-68FYTN0 1TB
UFS backup device [Backups] 1xWDC WD10EFRX-68FYTN0 1TB

liver
Starter
Starter
Posts: 64
Joined: 18 May 2013 21:32
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#27

Post by liver »

raulfg3 wrote:
22 Oct 2020 21:05
why t install ina jail?.

is really easy to install from OBI:

https://www.xigmanas.com/forums/viewtop ... 71&t=11189

plex: https://www.xigmanas.com/forums/viewtop ... 71&t=11184
i'am have Version 11.1.0.4.5673, update plex extension and then plext not starting...
Version 11.1.0.4.5673
Platform OS F11.1-RELEASE-P11
Platform x64-embedded on AMD C-60 APU with Radeon(tm) HD Graphics
System ASUSTeK COMPUTER INC. C60M1-I
ZFS pool device [Pool_01] 2xWDC WD10EFRX-68JCSN0 1TB
ZFS pool device [Pool_02] 2xWDC WD10EFRX-68FYTN0 1TB
UFS backup device [Backups] 1xWDC WD10EFRX-68FYTN0 1TB

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4968
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#28

Post by raulfg3 »

liver wrote:
22 Oct 2020 21:27
raulfg3 wrote:
22 Oct 2020 21:05
why t install ina jail?.

is really easy to install from OBI:

https://www.xigmanas.com/forums/viewtop ... 71&t=11189

plex: https://www.xigmanas.com/forums/viewtop ... 71&t=11184
i'am have Version 11.1.0.4.5673, update plex extension and then plext not starting...
post more info to help you, on the plex extension forum
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510

liver
Starter
Starter
Posts: 64
Joined: 18 May 2013 21:32
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#29

Post by liver »

there I was told to update the system up.
it seems to me it's not the system. I put Plex on the 12th version freebsd. nothing changed.
Version 11.1.0.4.5673
Platform OS F11.1-RELEASE-P11
Platform x64-embedded on AMD C-60 APU with Radeon(tm) HD Graphics
System ASUSTeK COMPUTER INC. C60M1-I
ZFS pool device [Pool_01] 2xWDC WD10EFRX-68JCSN0 1TB
ZFS pool device [Pool_02] 2xWDC WD10EFRX-68FYTN0 1TB
UFS backup device [Backups] 1xWDC WD10EFRX-68FYTN0 1TB

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4968
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: [HOWTO] install Plex in a jail via thebrig

#30

Post by raulfg3 »

please use more words to describe your problem, it's really hard to identify why you want to install plex into the brig, and what means
liver wrote:
23 Oct 2020 13:22
there I was told to update the system up.
it seems to me it's not the system. I put Plex on the 12th version freebsd. nothing changed.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510

Post Reply

Return to “Jails”