*New 12.1 series Release:
2020-09-13: XigmaNAS - released

*New 11.4 series Release:
2020-09-12: XigmaNAS - released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

Suspend mode for NAS

Green PC, UPS, Power saving, etc.
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
Posts: 4
Joined: 25 Dec 2015 18:30
Status: Offline

Suspend mode for NAS


Post by vishnumrao »

I just built a NAS with 4x2TB HDD using a A75m-ITX MB with a AMD A8-3870 APU on it, paired with 8 GB of DDR3 DRAM. Installation is on a CF card plugged into a card reader. I haven't installed the HDD yet. Still playing around with the settings / configs etc, before installing the HDD and committing any data to it.

I noticed that there is no option for the NAS to go into a suspend mode after a configurable minutes of inactivity. There is some knobs to go into low power mode, but not suspend.

The machine idles at around 43W with no HDDs installed. The system previously ran Ubuntu Linux. I measured about 40W idle and 4W when in suspend mode. Does NAS4Free have suspend mode?

I have seen a Wake up on LAN ping in the BIOS settings. I imaging that a NAS can go into suspend / sleep and be woken up when a access request is received via the LAN connection (which is the only connection for a NAS in headless mode. Any ideas on how to enable suspend mode?

Note: I tried FreeNAS 9.10 and did not find suspend either.

Posts: 17
Joined: 01 Mar 2015 10:03
Status: Offline

Re: Suspend mode for NAS


Post by anders.malm »

ASUS P10-S, Intel i3 CPU, 16 GB ECC ram, 250 GB M2 SSD, RootOnZFS

Post Reply

Return to “Other hardware”