*New 11.3 series Release:
2019-10-05: XigmaNAS 11.3.0.4.6928 - released, 11.2 series are soon unsupported!

*New 12.0 series Release:
2019-10-05: XigmaNAS 12.0.0.4.6928 - released!

*New 11.2 series Release:
2019-09-23: XigmaNAS 11.2.0.4.6881 - released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

No connectivity after restart

NIC, network controllers, compatibility questions, WOL, wake on lan
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
kilrath81
NewUser
NewUser
Posts: 4
Joined: 21 Feb 2019 19:29
Status: Offline

No connectivity after restart

#1

Post by kilrath81 » 21 Feb 2019 19:43

So installed 11.2 yesterday from scratch. I installed from a LiveUSB to another usb. When i restart the server everything works perfectly accept the network connection. It shows the configured address properly but it cant ping any systems and no systems can ping it. If i pick option 2 and just hit enter through all of the IPv4 setting information, keeping it as is, everything will work again. I did some searching and found one thread that said disabling network stacking in the bios fixed the issue for them in 9.x, but not finding anything for 11.2. I disabled it in bios anyway to see if it would work, but it did not.

It is an integrated Realtec NIC, which i read can have issues, but ti works perfectly after going through the ip settings which makes me think its some sort of settings issue or bios setting issue. Does anyone have any ideas?

This is a screenshot of the system information:
XigmaNAS_Info.png
You do not have the required permissions to view the files attached to this post.

kilrath81
NewUser
NewUser
Posts: 4
Joined: 21 Feb 2019 19:29
Status: Offline

Re: No connectivity after restart

#2

Post by kilrath81 » 02 Mar 2019 01:23

no one?

User avatar
Snufkin
Advanced User
Advanced User
Posts: 289
Joined: 01 Jul 2012 11:27
Location: Etc/GMT-3 (BSD style)
Status: Offline

Re: No connectivity after restart

#3

Post by Snufkin » 02 Mar 2019 10:28

kilrath81 wrote:
21 Feb 2019 19:43
It is an integrated Realtec NIC, which i read can have issues, but ti works perfectly after going through the ip settings which makes me think its some sort of settings issue or bios setting issue. Does anyone have any ideas?
Too little raw data to analyze your case.

Please enter http://<XNAS IP address>/status.php manually in browser address bar and copy here information relates to the network.
XNAS 11.3.0.4 embedded, ASUS P5B-E, Intel DC E6600, 4 GB DDR2, 2 x HGST HDN726040ALE614, 2 x WDC WD5000AAKS, Ippon Back Power Pro 400

kilrath81
NewUser
NewUser
Posts: 4
Joined: 21 Feb 2019 19:29
Status: Offline

Re: No connectivity after restart

#4

Post by kilrath81 » 02 Mar 2019 19:04

Code: Select all

Interfaces
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
	ether d4:3d:7e:df:b1:65
	hwaddr d4:3d:7e:df:b1:65
	inet 10.62.87.245 netmask 0xffffff00 broadcast 10.62.87.255
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
	inet 127.0.0.1 netmask 0xff000000
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	groups: lo

Code: Select all

Routing tables
Routing tables

Internet:
Destination        Gateway            Flags     Netif Expire
default            10.62.87.1         UGS         re0
10.62.87.0/24      link#1             U           re0
10.62.87.245       link#1             UHS         lo0
127.0.0.1          link#2             UH          lo0

Internet6:
Destination                       Gateway                       Flags     Netif Expire
::1                               link#2                        UH          lo0
fe80::%lo0/64                     link#2                        U           lo0
fe80::1%lo0                       link#2                        UHS         lo0

Code: Select all

Network performances
258/3042/3300 mbufs in use (current/cache/total)
257/1523/1780/492184 mbuf clusters in use (current/cache/total/max)
257/1514 mbuf+clusters out of packet secondary zone in use (current/cache)
0/45/45/246091 4k (page size) jumbo clusters in use (current/cache/total/max)
0/0/0/72916 9k jumbo clusters in use (current/cache/total/max)
0/0/0/41015 16k jumbo clusters in use (current/cache/total/max)
578K/3986K/4565K bytes allocated to network (current/cache/total)
0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters)
0/0/0 requests for mbufs delayed (mbufs/clusters/mbuf+clusters)
0/0/0 requests for jumbo clusters delayed (4k/9k/16k)
0/0/0 requests for jumbo clusters denied (4k/9k/16k)
7 sendfile syscalls
1 sendfile syscalls completed without I/O request
6 requests for I/O initiated by sendfile
8 pages read by sendfile as part of a request
1 pages were valid at time of a sendfile request
0 pages were requested for read ahead by applications
0 pages were read ahead by sendfile
0 times sendfile encountered an already busy page
0 requests for sfbufs denied
0 requests for sfbufs delayed

Code: Select all

resolv.conf
domain local
nameserver 1.1.1.1
nameserver 8.8.8.8

hosts
::1 localhost localhost.local
127.0.0.1 localhost localhost.local
10.62.87.245 nas.local nas

hosts.allow
#ftpd  : xxx.xxx.xxx.xxx : deny
#sshd : .example.com : deny
#in.tftpd : xxx.xxx.xxx.xxx : deny
#bsnmpd : xxx.xxx.xxx.xxx : deny
ALL : ALL : allow

User avatar
Snufkin
Advanced User
Advanced User
Posts: 289
Joined: 01 Jul 2012 11:27
Location: Etc/GMT-3 (BSD style)
Status: Offline

Re: No connectivity after restart

#5

Post by Snufkin » 02 Mar 2019 23:21

Do not see any errors or wrong settings in your report.
kilrath81 wrote:
21 Feb 2019 19:43
It shows the configured address properly but it cant ping any systems and no systems can ping it. If i pick option 2 and just hit enter through all of the IPv4 setting information, keeping it as is, everything will work again.
Doing this you force network adapter restart, and then it works fine. You may be right in suspecting problems in the Realtek driver.

In some cases this kind of problem can be bypassed if you disable some driver features on Network | LAN Management page. Please, try one by one:
  • to disable WOL completely,
  • to add to Extra options -RXCSUM to disable checksumming for incoming packets,
  • to add to Extra options -TXCSUM to disable checksumming for outgoing packets.
For example, in my setup I have to disable offload by adding -TSO4, but it's not applicable in your case because driver doesn't support this feature.

As a last resort, you can try to disable WOL options in motherboard BIOS.

If nothing helps, you can disable built-in network adapter in BIOS and install the network expansion card.
It gives you chance to increase the speed up to 1 Gbit.
XNAS 11.3.0.4 embedded, ASUS P5B-E, Intel DC E6600, 4 GB DDR2, 2 x HGST HDN726040ALE614, 2 x WDC WD5000AAKS, Ippon Back Power Pro 400

kilrath81
NewUser
NewUser
Posts: 4
Joined: 21 Feb 2019 19:29
Status: Offline

Re: No connectivity after restart

#6

Post by kilrath81 » 21 Mar 2019 17:57

After adding those extra options it doesnt work at all. I had to set it to DHCP and now it works after restart. Odd that it wont work after a restart on static IP but on DHCP it works. Either way, problem solved.

Post Reply

Return to “LAN , Network controllers”