Latest News:
2019-03-31: XigmaNAS 11.2.0.4.6625 - released!

Latest BETA Release:
2019-03-31: XigmaNAS 12.0.0.4.6625 - BETA released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS cost money, please consider a donation to our project so we can continue to offer you the best.
We need your support! eg: PAYPAL

WebGUI and zpool status disagree

If you are new on this forum and you don't know where to post please use this sub-forum. Somebody will answer your question and/or will move your topic into the right sub-forum.
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
nasfool
NewUser
NewUser
Posts: 3
Joined: 10 Mar 2019 12:18
Status: Offline

WebGUI and zpool status disagree

#1

Post by nasfool » 15 Mar 2019 19:06

Hi,

XigmaNAS 11.2.0.4 on a SuperMicro X10SLM-F with ECC ram.
There is no Help|Report Generator as the forum rules state, so I can't post that output.

4 x 4TB RaidZ2 virtual device in a single pool
2 x 3TB in a Mirror virtual device in a single pool.
1 x 2 TB UFS disk.

Code: Select all

WebGui|Disks|ZFS|Pools|Virtual Device|Edit
	ada1 	Entire Device 	WDC WD40EZRZ-00GXCB0 	WD-WCC7K1NNXAZZ 	4.00TB 	ahcich1 (Marvell 88SE9230 AHCI SATA controller) 	Western Digital Blue
	ada2 	Entire Device 	WDC WD40EZRZ-00GXCB0 	WD-WCC7K2XFLS8D 	4.00TB 	ahcich8 (Marvell 88SE9230 AHCI SATA controller) 	Western Digital Blue
	ada4 	Entire Device 	ST4000DM004-2CV104 	ZFN0EESS 	4.00TB 	ahcich10 (Marvell 88SE9230 AHCI SATA controller) 	Seagate Barracuda 3.5 
	ada6 	Entire Device 	WDC WD20EARX-32PASB0 	WD-WCAZAH684201 	2.00TB 	ahcich18 (Intel Lynx Point AHCI SATA controller) 	Western Digital Green

Code: Select all

zpool status
$ zpool status
  pool: max
 state: ONLINE
  scan: none requested
config:

	NAME        STATE     READ WRITE CKSUM
	max         ONLINE       0     0     0
	  raidz2-0  ONLINE       0     0     0
	    ada1    ONLINE       0     0     0
	    ada2    ONLINE       0     0     0
	    ada4    ONLINE       0     0     0
	    ada7    ONLINE       0     0     0
I think zpool status is right, it's what I intended anyway.

Worryingly WebGUI | Disks | Management | HDD Format shows ada7 as formattable.
You do not have the required permissions to view the files attached to this post.

User avatar
ms49434
Developer
Developer
Posts: 581
Joined: 03 Sep 2015 18:49
Location: Neuenkirchen-Vörden, Germany - GMT+1
Contact:
Status: Offline

Re: WebGUI and zpool status disagree

#2

Post by ms49434 » 15 Mar 2019 20:36

The standard procedure to sync the WebGUI is:

Goto Disks > Management > HDD Management, check box next to "Clear configuration information before importing disks." and click the Import button in the Import Disk section.
Goto Disks > ZFS > Configuration > Synchronize with all 3 boxes checked. and click button Synchronize to update the configuration.
1) XigmaNAS 11.2.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7, 22GB out of 32GB ECC RAM, LSI 9300-8i IT mode in passthrough mode. Pool 1: 2x HGST 10TB, mirrored, SLOG: Samsung 850 Pro, L2ARC: Samsung 850 Pro, Pool 2: 1x Samsung 860 EVO 1TB , services: Samba AD, CIFS/SMB, ftp, ctld, rsync, syncthing, zfs snapshots.
2) XigmaNAS 11.2.0.4 amd64-embedded on a Dell T20 running in a VM on ESXi 6.7, 8GB out of 32GB ECC RAM, IBM M1215 crossflashed, IT mode, passthrough mode, 1x HGST 10TB , services: rsync.

nasfool
NewUser
NewUser
Posts: 3
Joined: 10 Mar 2019 12:18
Status: Offline

Re: WebGUI and zpool status disagree

#3

Post by nasfool » 15 Mar 2019 23:12

Thanks, GUI looks correct now :)

Post Reply

Return to “Newbie Questions”