Latest News:
2019-03-31: XigmaNAS 11.2.0.4.6625 - released!

Latest BETA Release:
2019-03-31: XigmaNAS 12.0.0.4.6625 - BETA released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS cost money, please consider a donation to our project so we can continue to offer you the best.
We need your support! eg: PAYPAL

HP micro Gen8 + SmartArray p222

Hard disks, HDD, RAID Hardware, disk controllers, SATA, PATA, SCSI, IDE, On Board, USB, Firewire, CF (Compact Flash)
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
igr4free
Starter
Starter
Posts: 30
Joined: 19 Dec 2016 15:12
Status: Offline

HP micro Gen8 + SmartArray p222

#1

Post by igr4free » 16 May 2019 20:48

Hi!

I update my HP Gen8 by adding an HP P222 smartarray and 4x8TB disks. But when I start XigmaNAS the disks don't appear on system.

At startup I see that it detects the hp p222 card. And from the HP Array Configuration app, the disks are detected.

I can not find anything about how to make it work. I don't know if I miss any process before starting XigmaNAS, or do I have to do something that I have read about changing the mode of the array card to HBA? so that the management of the array is XigmaNAS and not the server ??

I would like to configure raid zfs1 from xigmanas

Thank you!

doktornotor
Advanced User
Advanced User
Posts: 178
Joined: 16 May 2017 00:22
Status: Offline

Re: HP micro Gen8 + SmartArray p222

#2

Post by doktornotor » 26 May 2019 10:22

Yes, for use with ZFS you should not have any RAID configured on the controller. Should be possible with firmware 8.32 or newer without any weirdo mods required, see this

Post Reply

Return to “Hard disk & controller”