*New 12.1 series Release:
2019-11-08: XigmaNAS 12.1.0.4.7091 - released!

*New 11.3 series Release:
2019-10-19: XigmaNAS 11.3.0.4.7014 - released


We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money. Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

Upgrade from 10.xx to 12.0.0.4 and SMB shares not working Win10

CIFS/SMB network sharing.
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
rwps
Starter
Starter
Posts: 36
Joined: 19 Sep 2012 13:55
Location: Australia
Status: Offline

Upgrade from 10.xx to 12.0.0.4 and SMB shares not working Win10

#1

Post by rwps » 19 Aug 2019 13:40

I've upgraded to 12.0.0.4, and restored my settings from my prev 10.xx setup.
All seems to be working fine, except I've discovered that I can't access the shares from my PCs (both Win10).
I note I can browse to them at the local address \\192.168.1.xx\POOLNAME, and the browser maps that to file://///192.168.1.xx/pool - not sure if that relies on SMB.
My settings are below - any thoughts?
thanks

Image

Image
Version:> 12.0.0.4 - Reticulus (revision 6766)
Platform OS:> FreeBSD 12.0-RELEASE-p6 #0 r349200M: Wed Jun 19 20:27:52 CEST 2019
Platform:> x64-Full on Intel(R) Xeon(R) CPU E3-1265L V2 @ 2.50GHz
System:> HP ProLiant MicroServer Gen8
Ram:> 8gb
Pool:> 3x 3tb, 1x 4tb, one pool, raidz2
Donate to XigmaNAS:> I do, & it's a tiny price to pay to support the good work that provides the rock of my home network

User avatar
ChriZathens
Forum Moderator
Forum Moderator
Posts: 833
Joined: 23 Jun 2012 09:14
Location: Athens, Greece
Contact:
Status: Offline

Re: Upgrade from 10.xx to 12.0.0.4 and SMB shares not working Win10

#2

Post by ChriZathens » 20 Aug 2019 08:33

In additional parameters you can try to set

Code: Select all

ntlm auth=yes
Try if this works
My Nas
  1. Case: Fractal Design Define R2
  2. M/B: Supermicro x9scl-f
  3. CPU: Intel Celeron G1620
  4. RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
  5. PSU: Chieftec 850w 80+ modular
  6. Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
  7. O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
  8. Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S

Backup Nas: HP N40L (4x1TB HP branded Seagate disks in RaidZ configuration - 8GB ECC RAM)

rwps
Starter
Starter
Posts: 36
Joined: 19 Sep 2012 13:55
Location: Australia
Status: Offline

Re: Upgrade from 10.xx to 12.0.0.4 and SMB shares not working Win10

#3

Post by rwps » 20 Aug 2019 09:12

ChriZathens wrote:
20 Aug 2019 08:33
In additional parameters you can try to set

Code: Select all

ntlm auth=yes
Try if this works
It worked perfectly - many thanks!

I wonder what changed between 10.xx & 12.xx that this is needed?
Version:> 12.0.0.4 - Reticulus (revision 6766)
Platform OS:> FreeBSD 12.0-RELEASE-p6 #0 r349200M: Wed Jun 19 20:27:52 CEST 2019
Platform:> x64-Full on Intel(R) Xeon(R) CPU E3-1265L V2 @ 2.50GHz
System:> HP ProLiant MicroServer Gen8
Ram:> 8gb
Pool:> 3x 3tb, 1x 4tb, one pool, raidz2
Donate to XigmaNAS:> I do, & it's a tiny price to pay to support the good work that provides the rock of my home network

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4978
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Upgrade from 10.xx to 12.0.0.4 and SMB shares not working Win10

#4

Post by raulfg3 » 20 Aug 2019 09:47

rwps wrote:
20 Aug 2019 09:12
I wonder what changed between 10.xx & 12.xx that this is needed?
Changes reflected on readme: https://sourceforge.net/projects/xigman ... .0.4.6766/

cifs/smb note:
==============
From Samba 4.5.0 and up the default value for the "ntlm auth" option is changed from "yes" to "no".
This may have impact on very old clients which doesn't support NTLMv2 yet.
Only if you really need NTLMv1 Authentication you can set in Services > CIFS/SMB > Settings on
Additional Parameters: "ntlm auth = yes".

So, its better if you modify win to do not use NTLM
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

Navvie
NewUser
NewUser
Posts: 1
Joined: 27 Aug 2017 11:20
Status: Offline

Re: Upgrade from 10.xx to 12.0.0.4 and SMB shares not working Win10

#5

Post by Navvie » 21 Sep 2019 15:16

Any suggestions or links on modifying Windows 10 not to use NTLM v1?

I'm struggling to understand why Windows 10 uses NTLM v1 when this change of setting on affects "very old clients".
SuperMicro X9SCM-F Xeon E3-1265L v2 32GB DDR3 1600 EEC
40TB of RAW storage

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4978
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Upgrade from 10.xx to 12.0.0.4 and SMB shares not working Win10

#6

Post by raulfg3 » 21 Sep 2019 19:12

Navvie wrote:
21 Sep 2019 15:16
Any suggestions or links on modifying Windows 10 not to use NTLM v1?

I'm struggling to understand why Windows 10 uses NTLM v1 when this change of setting on affects "very old clients".

see: viewtopic.php?f=57&t=14822#p91958
12.0.0.4 (revision 6766)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes

Post Reply

Return to “CIFS/SMB (Samba)”