Latest News:
*New 11.2 series Release:
2019-06-20: XigmaNAS 11.2.0.4.6766 - released!

*New 12.0 series Release:
2019-06-20: XigmaNAS 12.0.0.4.6766 - released!

We really need "Your" help on XigmaNAS https://translations.launchpad.net/xigmanas translations. Please help today!

Producing and hosting XigmaNAS costs money Please consider donating for our project so that we can continue to offer you the best.
We need your support! eg: PAYPAL

[EXTENSION] Extended GUI

XigmaNAS Extensions / Add-ons

Moderator: crest

Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
bgold
Starter
Starter
Posts: 59
Joined: 23 May 2015 08:42
Status: Offline

Re: [EXTENSION] Extended GUI

#631

Post by bgold » 30 Apr 2019 16:25

crest wrote:
30 Apr 2019 08:45
Hello bgold,
bgold wrote:
29 Apr 2019 21:36
Is there any chance of adding alarms for SSD life? Similar to the diskspace.

Thanks
Yes, can be done. Since the lifetime values are wide spread how the different vendors implemented in SMART it would be helpful to send me the whole SMART output of your SSDs.

Regards
crest
Here you go and thanks
You do not have the required permissions to view the files attached to this post.
XigmaNAS 12.0.0.4.6625
HP ML150 Gen9, Dual 2.4ghz, 256gb, 25TB Storage, 3-ZFS pools w/SSD cache&logs, SSD boot/data, SFP+

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 862
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#632

Post by crest » 04 May 2019 18:59

bgold wrote:
30 Apr 2019 16:25
crest wrote:
30 Apr 2019 08:45
Hello bgold,
bgold wrote:
29 Apr 2019 21:36
Is there any chance of adding alarms for SSD life? Similar to the diskspace.

Thanks
Yes, can be done. Since the lifetime values are wide spread how the different vendors implemented in SMART it would be helpful to send me the whole SMART output of your SSDs.

Regards
crest
Here you go and thanks
Thanks for sending the SMART values, pls be patient, will take some days for me to start again to work on the extension ;)

NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM

UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone

doktornotor
Advanced User
Advanced User
Posts: 182
Joined: 16 May 2017 00:22
Status: Offline

Re: [EXTENSION] Extended GUI

#633

Post by doktornotor » 05 May 2019 10:27

crest wrote:
04 May 2019 18:59
Thanks for sending the SMART values, pls be patient, will take some days for me to start again to work on the extension ;)
While this is being worked on... any chance to fix this glitch? Not sure where's the -518% coming from, but it's unwanted. :)
EGUI_SSD.png
You do not have the required permissions to view the files attached to this post.

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 862
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#634

Post by crest » 05 May 2019 11:30

Sure, will take this also ...

NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM

UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone

User avatar
gomario
Starter
Starter
Posts: 68
Joined: 17 Dec 2016 08:45
Status: Offline

Re: [EXTENSION] Extended GUI

#635

Post by gomario » 17 May 2019 19:28

Extended GUI can not make sense of ZFS formated drives without partitions! It expects to see at least one partition (P1), otherwise it completely ignores the drives above the non partitioned drive (even if those drives do have partitions) and while it does display the non partition drive, it can't understand what is going on and shows nonsense. Anyone else observed this anomaly? And is there a way to fix the issue without formating (and manualy partitioning) the drive in question? I don't feel like resilvering the drive just because Extended GUI has an issue.
Second Pic.jpg
First Pic.jpg
You do not have the required permissions to view the files attached to this post.

bjs
Starter
Starter
Posts: 22
Joined: 08 Mar 2019 12:58
Location: Virginia, USA
Status: Offline

Re: [EXTENSION] Extended GUI

#636

Post by bjs » 19 May 2019 23:59

I am also seeing some strange results in my Disk Space Usage Panel...

Disk Space Panel.JPG

bootpool is made up of ada0s1 and ada1s1 in a mirror vdev... zpool is made up of ada0s3 and ada1s3 also in a mirror vdev... ada0 and ada1 are HP M700 120G SSD's with a full RootOnZFS/MBR install... I would expect to see ada0 and ada1 listed for both similar to my storage pools (da0 and da1, da2 and da3, etc)...

Don't know if it's related, but shouldn't there be a green checkmark, there seems to be plenty of available space???

I can also send you the smart data for the HP M700 if you would like it as well...

Regards,
Ben
You do not have the required permissions to view the files attached to this post.
XigmaNAS 11.2.0.4 - Omnius RootOnZFS/MBR - HP M700 120GB SSDs
x64-full on Intel Core2 Quad CPU Q9300 @ 2.50GHz - 8GB RAM
Intel DG33FB Motherboard - LSI 9211-8i with 8TB available

User avatar
gomario
Starter
Starter
Posts: 68
Joined: 17 Dec 2016 08:45
Status: Offline

Re: [EXTENSION] Extended GUI

#637

Post by gomario » 22 May 2019 13:54

Ok, in my case it turned out to be a easy fix I merely had to synchronize the underlying XigmaNAS OS (BSD) with the GUI. All shows OK now
I suggest you try the same thing.

Sent from my MI 5s Plus using Tapatalk


User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 862
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#638

Post by crest » 23 May 2019 08:55

Hello bjs,
bjs wrote:
19 May 2019 23:59
I am also seeing some strange results in my Disk Space Usage Panel...
...
bootpool is made up of ada0s1 and ada1s1 in a mirror vdev... zpool is made up of ada0s3 and ada1s3 also in a mirror vdev... ada0 and ada1 are HP M700 120G SSD's with a full RootOnZFS/MBR install... I would expect to see ada0 and ada1 listed for both similar to my storage pools (da0 and da1, da2 and da3, etc)...
Pls try, as gomario already recommended, to synchronize the pools, should solve your issues too.

Don't know if it's related, but shouldn't there be a green checkmark, there seems to be plenty of available space???
At the moment the space check is not yet implemented for zroot but I'll do this for the next release of eGUI.

I can also send you the smart data for the HP M700 if you would like it as well...
Yes, please, would be helpful ... !

Best regards
crest

NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM

UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone

bjs
Starter
Starter
Posts: 22
Joined: 08 Mar 2019 12:58
Location: Virginia, USA
Status: Offline

Re: [EXTENSION] Extended GUI

#639

Post by bjs » 01 Jun 2019 15:57

Well it's obvious, to me at least, that I don't know what I'm doing... I have tried synchronizing the pools and every time I do I wind up with 4 disks that need to be deleted under Disk Management and the home page doesn't change from what I posted above... Also, the check mark I was referring to was for the top pool named Backup... I'm also wondering if the bootpool and zpool aren't detected properly because this is a MBR install... Whatever, I'm afraid the only way to fix it maybe a complete reinstall...

Anyway, here is the smart details on my HP M700 SSDs...
You do not have the required permissions to view the files attached to this post.
XigmaNAS 11.2.0.4 - Omnius RootOnZFS/MBR - HP M700 120GB SSDs
x64-full on Intel Core2 Quad CPU Q9300 @ 2.50GHz - 8GB RAM
Intel DG33FB Motherboard - LSI 9211-8i with 8TB available

User avatar
JoseMR
Hardware & Software Guru
Hardware & Software Guru
Posts: 1121
Joined: 16 Apr 2014 04:15
Location: PR
Contact:
Status: Offline

Re: [EXTENSION] Extended GUI

#640

Post by JoseMR » 01 Jun 2019 17:23

bjs wrote:
01 Jun 2019 15:57
Well it's obvious, to me at least, that I don't know what I'm doing... I have tried synchronizing the pools and every time I do I wind up with 4 disks that need to be deleted under Disk Management and the home page doesn't change from what I posted above... Also, the check mark I was referring to was for the top pool named Backup... I'm also wondering if the bootpool and zpool aren't detected properly because this is a MBR install... Whatever, I'm afraid the only way to fix it maybe a complete reinstall...

Anyway, here is the smart details on my HP M700 SSDs...
Hi bjs, in RootOnZFS/MBR installations the bootpool(ada0s1a) and zroot(ada0s1d) while they independent ZFS pools, they reside in the same disk but in different slices as required for MBR.

I guess that eGUI smartctl command is calling for either "/dev/adaXs1" or "/dev/adaXs1X" and not omitting the slice part(s1X) then returning nothing, but I can't confirm this from a VM unfortunately, but I will let crest know if I find solution.

Regards
System: FreeBSD 12 RootOnZFS, MB: Supermicro X8SI6-F, Xeon X3450, 16GB DDR3 ECC RDIMMs.
Addons at GitHub
JoseMRPubServ
Boot Environments Intro

sleyk2010
Starter
Starter
Posts: 21
Joined: 22 Nov 2018 03:30
Status: Offline

Re: [EXTENSION] Extended GUI

#641

Post by sleyk2010 » 18 Jul 2019 16:05

Hello,

I apologize greatly if this is already fixed, but I haven't been able to find a solution,

I install OneButton and install only Extended-Gui for now.

Everything works great, and I see all drives, along with temps and everything looks good. The issue occurs when I reboot.

The extension pages for both the OneButton and Extended-Gui disappear. When I look at File Manager, I see all folders as initially installed, but for some reason, tab in Web Gui is not persistent upon reboot.

I then have to go ahead and reinstall OneButton to see the extension page again in the Web Gui.

Is there any fix for this? Every time I reboot, I lose the extension page and have to reinstall all over again. I am currently on 12.0.0.4 6766 Embedded. This is a fresh install.

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4913
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: [EXTENSION] Extended GUI

#642

Post by raulfg3 » 18 Jul 2019 17:11

revise option in webGUI to do not load extensions = "Disable extensions Menu"
1.jpg
You do not have the required permissions to view the files attached to this post.
12.0.0.4 - BETA (revision 6625)+OBI on SUPERMICRO X8SIL-F 8GB of ECC RAM, 12x3TB disk in 3 vdev in RaidZ1 = 32TB Raw size only 22TB usable

Wiki
Last changes
Old Wiki

sleyk2010
Starter
Starter
Posts: 21
Joined: 22 Nov 2018 03:30
Status: Offline

Re: [EXTENSION] Extended GUI

#643

Post by sleyk2010 » 22 Jul 2019 16:35

Hi Raulfg,

Thanks for giving me this suggestion. You always are available and help out. Thanks so much!

Sadly, this did not work, I reinstalled and it showed the extensions menu, but when I enabled this toggle, it actually made the extensions tab disappear again :shock:

But thank you my friend, I have thought of something that might work. I will post back shortly.

sleyk2010
Starter
Starter
Posts: 21
Joined: 22 Nov 2018 03:30
Status: Offline

Re: [EXTENSION] Extended GUI

#644

Post by sleyk2010 » 22 Jul 2019 16:40

@raulfg3: Ok I got this to finally work. Now my extensions tab is persistent on reboot.

I had to go and reorder the list of command scripts in my command scripts page under System > advanced.

It was weird, I had some command scripts running postinit, and it seems to somehow get higher on the list than the command script to start Onebutton and Extended-Gui.

I went ahead and reordered the command scripts so that OneButton and Extended-Gui load first, then I made sure my other command scripts were lower in the proper place for postinit and shutdown.

This fixed it and now the extension page is there after every reboot.

So if anyone gets this problem, just check your command scripts list and make sure OneButton and any other extension is high on the priority list to load first as a Postinit, then place any other command scripts lower.

Thanks for this, as I would not have tried this without your initial suggestion.

Appreciate your help my friend!

User avatar
crest
Hardware & Software Guru
Hardware & Software Guru
Posts: 862
Joined: 02 Jul 2012 22:25
Location: Vienna, Austria - GMT+1
Status: Offline

Re: [EXTENSION] Extended GUI

#645

Post by crest » 24 Jul 2019 09:19

sleyk2010 wrote:
22 Jul 2019 16:40
@raulfg3: Ok I got this to finally work. Now my extensions tab is persistent on reboot.

I had to go and reorder the list of command scripts in my command scripts page under System > advanced.

It was weird, I had some command scripts running postinit, and it seems to somehow get higher on the list than the command script to start Onebutton and Extended-Gui.

I went ahead and reordered the command scripts so that OneButton and Extended-Gui load first, then I made sure my other command scripts were lower in the proper place for postinit and shutdown.

This fixed it and now the extension page is there after every reboot.

So if anyone gets this problem, just check your command scripts list and make sure OneButton and any other extension is high on the priority list to load first as a Postinit, then place any other command scripts lower.

Thanks for this, as I would not have tried this without your initial suggestion.

Appreciate your help my friend!
Just out of curiosity, can you show the scripts that blocked somehow the extension scripts - under normal circumstances they should run anyway but maybe delayed...

Regards
crest

NAS1: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI 760GM-P23; AMD Athlon(tm) II X2 250 7.58GiB RAM
NAS2: 11.2.0.4 - Omnius (Revision 6766) x64-embedded; MSI MS-7369; AMD Sempron(tm) LE-1250 8022MiB RAM

UPS: APC Back-UPS ES 550G
Extensions: OneButtonInstaller, Extended GUI, NextOwnCloud, BitTorrent Sync, Syncthing, Downloady, Midnight Commander, NCDU, MySQL, Rclone

Post Reply

Return to “Extensions / Add-ons”