how to finalise param a cluster of 2 nas4free with hast
Posted: 20 Oct 2013 10:24
Hello all,
First of all , i m a beginer on nas4free, and not very good un english.
At the second, i build a cluster made with 2 nas4free 9.1.0.1 - Sandstorm (revision 847) there will be use behand a whs2011.
All of the first part of param is good,
Problems arrived when i will param my mount point from hast.
I have this error === >
-------------------------------------------------------------------------------------------------
The following input errors were detected:
The attribute 'Name' may only consist of the characters a-z, A-Z, 0-9, _ , -.
Wrong partition type or partition number.
/dev/hast/disque0p1: Can't get UFS ID.
dumpfs: /dev/hast/disque0p1: could not find special device
-------------------------------------------------------------------------------------------------
one thing i find, may be the way of the solution,
==> i didn't find how to param hards drives partitions for hast and what sort of files systèm use.
==> i didn't have any directory "hast" on /dev/
i read something about zfs but it's not very clear in my litle frogge's hard.
Question:
If i pass by menu item format and format drive on ufs i don't find now my drive on menu "mount point" is that normal ?
Is here anyone could explane to me simply how to do it or that i lose somethings my param
== At resum ==
carp on lan ==> ok
bascul master to slave ==> ok
param resources on hast ==> ok
mount point build for hast ==> KO
thx all, and sorry for my bad english.
If I arrive to build my cluster i could write a how to for french speaking dummy's. :p that's at time a dream ^^
First of all , i m a beginer on nas4free, and not very good un english.
At the second, i build a cluster made with 2 nas4free 9.1.0.1 - Sandstorm (revision 847) there will be use behand a whs2011.
All of the first part of param is good,
Problems arrived when i will param my mount point from hast.
I have this error === >
-------------------------------------------------------------------------------------------------
The following input errors were detected:
The attribute 'Name' may only consist of the characters a-z, A-Z, 0-9, _ , -.
Wrong partition type or partition number.
/dev/hast/disque0p1: Can't get UFS ID.
dumpfs: /dev/hast/disque0p1: could not find special device
-------------------------------------------------------------------------------------------------
one thing i find, may be the way of the solution,
==> i didn't find how to param hards drives partitions for hast and what sort of files systèm use.
==> i didn't have any directory "hast" on /dev/
i read something about zfs but it's not very clear in my litle frogge's hard.
Question:
If i pass by menu item format and format drive on ufs i don't find now my drive on menu "mount point" is that normal ?
Is here anyone could explane to me simply how to do it or that i lose somethings my param
== At resum ==
carp on lan ==> ok
bascul master to slave ==> ok
param resources on hast ==> ok
mount point build for hast ==> KO
thx all, and sorry for my bad english.
If I arrive to build my cluster i could write a how to for french speaking dummy's. :p that's at time a dream ^^