I've recently installed NAS4Free 9.2.0.1 - Shigawire (revision 925) and cannot find a way to turn on the Diagnostic:Logs. None of the drop down boxes have anything in them and documentation in this area is extremely weak.
Would appreciate help in getting the logging turned on.
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Diagnostics|Log not reporting data
-
marklyn
- NewUser
- Posts: 6
- Joined: 12 Jul 2012 19:28
- Status: Offline
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: Diagnostics|Log not reporting data
please define a new location for your logs in your data disks, probably your install is full or corrupt due a excess of logs.
use clog_logdir to define new location as described here: http://wiki.nas4free.org/doku.php?id=faq:0134
use clog_logdir to define new location as described here: http://wiki.nas4free.org/doku.php?id=faq:0134
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510