Page 1 of 1
Setting up for use in HP Mediasmart EX475
Posted: 14 Feb 2014 20:19
by wyzard
Good afternoon.
Can I set up NAS4Free on an old PC hard drive then move that drive to an HP Mediasmart Server EX475? If so, is there anything special that I would need to do to get this configured and up and running?
Thanks.
Re: Setting up for use in HP Mediasmart EX475
Posted: 16 Feb 2014 18:28
by armandh
after doing that with the embedded OS the first tricky part is the NIC and IP settings
it can be done blind [do it on a box with video and duplicate the steps blind]
or I believe it can also be done via SSH but I have not done so.
Re: Setting up for use in HP Mediasmart EX475
Posted: 13 Jul 2015 06:51
by TommySharp
Would be great if the LED lights in the mediasmart server could also be used
Re: Setting up for use in HP Mediasmart EX475
Posted: 13 Jul 2015 12:20
by crowi
You can buy VGA cable which connects to the debug header, this makes things easier.
http://www.mediasmartserver.net/forums/ ... f=6&t=3980
Re: Setting up for use in HP Mediasmart EX475
Posted: 02 Aug 2015 02:30
by zoon01
How did this install ends for, is it working now, i think it's an nice box that HP Mediasmart EX475.