If I understand the instructions, I should be able to download a .img file and, with Linux, dd it onto a flash drive. I find instructions that say what to do with that file, apparently it has to be decompressed. those instructions, once I found them were clear. Unfortunately, when I go to download the file, I find that, even though the link is named NAS4Free-x86-embedded-9.2.0.1.972.img, the file that is downloaded is named NAS4Free-x86-embedded-9.2.0.1.972.bin.
What do I do with this file? treat it as if it had been named NAS4Free-x86-embedded-9.2.0.1.972.img? regname it by adding .gz, then decompress and burn to drive?
Help!!
Richard
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
embedded file is a .bin rather than a .img
-
rcdawson
- NewUser
- Posts: 1
- Joined: 25 May 2014 19:04
- Status: Offline
-
crowi
- Forum Moderator
- Posts: 1176
- Joined: 21 Feb 2013 16:18
- Location: Munich, Germany
- Status: Offline
Re: embedded file is a .bin rather than a .img
You can also take the live CD or live USB and install from there
NAS 1: Milchkuh: Asrock C2550D4I, Intel Avoton C2550 Quad-Core, 16GB DDR3 ECC, 5x3TB WD Red RaidZ1 +60 GB SSD for ZIL/L2ARC, APC-Back UPS 350 CS, NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: embedded file is a .bin rather than a .img
revise download site.rcdawson wrote: Unfortunately, when I go to download the file, I find that, even though the link is named NAS4Free-x86-embedded-9.2.0.1.972.img, the file that is downloaded is named NAS4Free-x86-embedded-9.2.0.1.972.bin.
correct download site is sourceforgue: http://sourceforge.net/projects/nas4fre ... 2.0.1.972/
I checkit and are named *.img not bin http://sourceforge.net/projects/nas4fre ... g/download
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510