XigmaNAS

If I understand the instructions, I should be able to download a .img file and, with Linux, dd it onto a flash drive. I find instructions that say what to do with that file, apparently it has to be decompressed. those instructions, once I found them were clear. Unfortunately, when I go to download the file, I find that, even though the link is named NAS4Free-x86-embedded-9.2.0.1.972.img, the file that is downloaded is named NAS4Free-x86-embedded-9.2.0.1.972.bin.

What do I do with this file? treat it as if it had been named NAS4Free-x86-embedded-9.2.0.1.972.img? regname it by adding .gz, then decompress and burn to drive?

Help!!

Richard

You can also take the live CD or live USB and install from there

rcdawson wrote: Unfortunately, when I go to download the file, I find that, even though the link is named NAS4Free-x86-embedded-9.2.0.1.972.img, the file that is downloaded is named NAS4Free-x86-embedded-9.2.0.1.972.bin.

revise download site.

correct download site is sourceforgue: http://sourceforge.net/projects/nas4fre ... 2.0.1.972/

I checkit and are named *.img not bin http://sourceforge.net/projects/nas4fre ... g/download