Can i Install on this machine (TC)?

[aliens72]

Hello world,

i have a thin client with 256MB RAM, CF 6Gb and via chipset 1Ghz.

Can i install freenas last version on this machine???

thanks

[b0ssman]

it will be difficult but it might be possible.
however i would not recommend it.

you will need a second machine where you will need to do a nas4free full installation to the cf card.
then move the cf card into the via machine and see if it boots.

256 mb ram is not enough to run the live version of nas4free

[aliens72]

What version? Embedded or normal? I try on other machine with 512Mb RAM but request for manually mount filesystem, it's normal?

[b0ssman]

the normal version.

see
http://wiki.nas4free.org/doku.php?id=faq:0037

Install on different computer. NOTE - This may be the easiest solution. Unlike Windows or other OS's, NAS4Free is mostly hardware independent. A fresh, unconfigured, installation made on a compatible computer can often be moved to another compatible computer without problems. Many times you can install NAS4Free, Embedded or Full to a hard drive or USB device on almost any computer with a CD/DVD and then move the device to the intended server without a CD/DVD and it will boot just fine.

[aliens72]

But i need to mount manually the filesystem?

Is the same to take di img and boot form USB than take the iso and burn CDROM?

[b0ssman]

i have no idea what you mean by that.

[armandh]

if there is any way to increase the memory please do so.
as a second choice, different hardware
as a third choice, the above suggestion to first set up the OS on other hardware.
to the flash from either live CD or live USB stick
BUTwhen installed in the thin client, and
starved for memory, it will be frustratingly slow

[aliens72]

I mean this, when i boot from USB stick this appear to me:

Manual root filesystem specifications:
<fstype>:<device> [options]
Mount device using filesystem <fstype>

? List valid disk boot device
. Yeld 1 second

If i press ? this the result:
List of GEOM managed devices:
ufsid/53545.............. da0a ada0s1 da0 ada0

[b0ssman]

did you use the live usb image?

and how did you write the image to the usb stick?

[crowi]

Take the LiveCD/LiveUSB version
Put the Live CD/USB and the CF card into another computer
Boot from LiveCD/USB and when the console menu appears, choose option 9 and install the full system on the CF
When installation is finished, put the CF into your thin client and boot from CF.

[aliens72]

did you use the live usb image?

and how did you write the image to the usb stick?

No i use the USB img and win32diskimage.

[aliens72]

I've try with live CD but system hang here:

iSCSI boot driver version 0.2.6

The hardware is 1GB RAM, CF 4GB and CPU via chipset 1Ghz.

[b0ssman]

viewtopic.php?f=15&t=1255

looks like there is a problem with the via systems.